דרושים » תוכנה » PHY Algorithms Developer for Wireless SoC

משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP
כל החברות >
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 10 שעות
Location: Haifa
Job Type: Full Time
In your role as a senior PHY Algorithms Development Engineer, as part of our Connectivity Group, you will be part of a world-class group that pioneers design and development of Physical Layer algorithms for wireless communication systems for our products. We live in a mobile and device driven world where knowledge of the physical world around us is needed. We rely on this knowledge to get around, to learn about our environment and to enable spectacular new features for custom applications. We are meeting those needs as robustly and as creatively as possible and is interested in people who want to help meet that commitment. The success we are targeting will be the result of very skilled people working in an environment which cultivates creativity, partnership, and thinking of old problem in new ways. If that sounds like the kind of environment that you find intriguing, then let's talk.

We are looking for a candidate who can innovate and integrate signal processing technologies for solving novel and diverse sets of problems in various wireless communication and sensing technologies:
- Develop communication signal processing algorithms for best-in-class implementation of various wireless standards.
- Conduct basic research of existing solutions in literature.
- Involvement in block level spec definition.
- Perform mathematical analyses of the given problem and its proposed solutions.
- Implement floating-point simulations to prove spec compliance of suggested solutions.
- Implement fixed-point modeling and simulation to allow performance sign-off and RTL bit-exact development .
- Write detailed design documents that will enable implementation of algorithms by other teams specializing in either RTL design or DSP firmware coding .
- Optimize and fine-tune the system for spec compliance on silicon in an RF lab environment.
Requirements:
Minimum Qualifications:
M.Sc/Ph.D in Electrical Engineering, Computer Engineering, or related discipline.
5+ years of experience and proficiency in C++ programming language.
Knowledge in digital signal processing algorithms and/or RF systems.
Proficiency in fixed-point modeling using C/C++ - mandatory.
Experience and proficiency with using MATLAB for algorithm development, modeling, and simulation.

Preferred Qualifications:
Knowledge in wireless protocols: Bluetooth or WLAN (IEEE 802.11) - highly preferred.
Experience in RF lab work and testing equipment (Spectrum, Analyser, Signal Generator, etc.) - highly preferred.
This position is open to all candidates.
 
Hide
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8509636
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות דומות שיכולות לעניין אותך
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 10 שעות
Location: Herzliya and Haifa
Job Type: Full Time
In your role as a senior PHY Algorithms Development Engineer, as part of Apple Connectivity Group, you will be part of a world-class group that pioneers design and development of Physical Layer algorithms for wireless communication systems for Apple products. We live in a mobile and device driven world where knowledge of the physical world around us is needed. We rely on this knowledge to get around, to learn about our environment and to enable spectacular new features for custom applications. Apple is meeting those needs as robustly and as creatively as possible and is interested in people who want to help meet that commitment. The success we are targeting will be the result of very skilled people working in an environment which cultivates creativity, partnership, and thinking of old problem in new ways. If that sounds like the kind of environment that you find intriguing, then let's talk.

We are looking for a candidate who can innovate and integrate signal processing technologies for solving novel and diverse sets of problems in various wireless communication and sensing technologies:
- Develop communication signal processing algorithms for best-in-class implementation of various wireless standards.
- Conduct basic research of existing solutions in literature.
- Involvement in block level spec definition.
- Perform mathematical analyses of the given problem and its proposed solutions.
- Implement floating-point simulations to prove spec compliance of suggested solutions.
- Implement fixed-point modeling and simulation to allow performance sign-off and RTL bit-exact development.
- Write detailed design documents that will enable implementation of algorithms by other teams specializing in either RTL design or DSP firmware coding.
- Optimize and fine-tune the system for spec compliance on silicon in an RF lab environment.
Requirements:
Minimum Qualifications:
M.Sc/Ph.D in Electrical Engineering, Computer Engineering, or related discipline.
5+ years of experience and proficiency in C++ programming language.
Knowledge in digital signal processing algorithms and/or RF systems.
Proficiency in fixed-point modeling using C/C++ - mandatory.
Experience and proficiency with using MATLAB for algorithm development, modeling, and simulation.

Preferred Qualifications:
Knowledge in wireless protocols: Bluetooth or WLAN (IEEE 802.11) - highly preferred.
Experience in RF lab work and testing equipment (Spectrum, Analyser, Signal Generator, etc.) - highly preferred.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8509616
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Do you want to impact billions of users by developing an extraordinary product with a prime focus on accuracy, understandability and performance of the product?
Bring passion and dedication to your job and there's no telling what you could accomplish.
PHY system engineers are responsible for pre/post-silicon system design activities to achieve full operation and optimization of all PHY aspects of a highly integrated complex wireless communication device.

In this role, you will be part of the team responsible for the PHY system design integration of a WiFi/BT/UWB IC solution. This includes, among other things:
Digital correction methods of RF impairments like Digital pre-distortion, IQ MM correction, Power Control, AGC, Modem control.
Optimizing PHY performance for a given system constraints.
Participate in modem design and implementation, from the architecture stage and floating point implementation all the way to RTL/FPGA validation in fixed point - Debug complex multi-disciplinary issues spanning from RF, PHY, MAC, HW and SW.
Connect with X-functional teams (RFIC, Algo, SW/FW etc.).
Perform hands-on PHY/RF lab work.
Requirements:
Minimum Qualifications:
BSc/MSc in Electrical Engineering/Computer Engineering or relevant fields.
3+ years of experience in communication/signal processing.
Deep understanding of RX and TX MODEM and RF chains.
Deep understanding of Wireless communication systems.
System level understanding - ability to comprehend and contribute to multi-disciplinary process employing HW, signal processing and SW.

Preferred Qualifications:
Analytical skills - ability to triage a problem root cause in a complex system.
Familiarity and ability for SW/FW coding.
Familiarity with lab test equipment.
Understanding of MAC systems - an advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8472831
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our company's direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
As the Design for Test (DFT) Engineer Lead, you will play a crucial role in DFT Architecture and DFT design, and support devices to production. You will be responsible for providing technical leadership in DFT, developing flows, automation, and methodology, planning DFT activities, tracking the DFT quality throughout the project life-cycle, and providing sign-off DFT to tapeout.
The AI and Infrastructure team is redefining whats possible. We empower our company customers with breakthrough capabilities and insights by delivering AI and Infrastructure at unparalleled scale, efficiency, reliability and velocity. Our customers, our company Cloud customers, and billions of our company users worldwide.
We're the driving force behind our company's groundbreaking innovations, empowering the development of our cutting-edge AI models, delivering unparalleled computing power to global services, and providing the essential platforms that enable developers to build the future. From software to hardware our teams are shaping the future of world-leading hyperscale computing, with key teams working on the development of our TPUs, Vertex AI for our company Cloud, our company Global Networking, Data Center operations, systems research, and much more.
Responsibilities
Lead and execute DFT activities in the design, implementation, and verification solutions for Application-Specific Integrated Circuits (ASIC).
Develop DFT strategy and architecture, including hierarchical DFT, Memory Built-In Self Test (MBIST), and Automatic Test Pattern Generation (ATPG).
Work with other Engineering teams (e.g., Design, Verification, Physical Design) to ensure that DFT requirements are met and mutual dependencies are managed.
Manage a DFT team planning, deliverables, and provide technical mentoring and guidance.
Lead DFT execution of a silicon project, planning, execution, tracking, quality, and signoff.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field, or equivalent practical experience.
8 years of experience in Design For Test from DFT architecture to post silicon production support.
4 years of experience with people management.
Experience with DFT design and verification for multiple projects, DFT specification, definition, architecture, and insertion.
Experience with DFT techniques and common industry tools, DFT and Physical Design flows, and DFT verification flow.
Experience in leading DFT activities throughout the whole ASIC development flow.
Preferred qualifications:
Master's degree in Electrical Engineering or a related field.
Experience in post-silicon Debug, test or product engineering.
Experience in JTAG and iJTAG protocols and architectures.
Experience in SoC cycles, silicon bring-up, and silicon debug activities.
Knowledge of fault modeling techniques.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8473549
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our company's direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
In this role, you will use Application-Specific Integrated Circuit (ASIC) design experience to be part of a team that develops complex ASIC System-on-Chip (SoC) intellectual property from proof-of-concept to production. This includes creating IP Level microarchitecture definitions, Register-Transfer Level (RTL) coding and all RTL quality checks. You will also have the opportunity to contribute to design flow and methodologies, including design generation automation. You will collaborate with members of architecture, software, verification, power, timing, synthesis design for testing etc. You will develop/define design options for performance, power and area.
The ML, Systems, & Cloud AI (MSCA) organization at our company designs, implements, and manages the hardware, software, machine learning, and systems infrastructure for all our company services (Search, YouTube, etc.) and our company Cloud. Our end users are our companyrs, Cloud customers and the billions of people who use our company services around the world.
We prioritize security, efficiency, and reliability across everything we do - from developing our latest TPUs to running a global network, while driving towards shaping the future of hyperscale computing. Our global impact spans software and hardware, including our company Clouds Vertex AI, the leading AI platform for bringing Gemini models to enterprise customers.
Responsibilities
Define the IP microarchitecture level design document such as interface protocol, block diagram, transaction flow, pipeline etc.
Perform RTL development (coding and debug in Verilog, SystemVerilog).
Conduct function/performance simulation debug and Lint/CDC/FV/UPF checks.
Engage in synthesis, timing/power closure, and ASIC silicon bring-up.
Contribute to verification test plan and coverage analysis of block and SoC-level.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field, or equivalent practical experience.
4 years of experience with digital logic design principles, Register-Transfer Level (RTL) design concepts, and languages such as Verilog or System Verilog.
Experience in logic design and debug with Design Verification (DV).
Experience with microarchitecture and specifications.
Preferred qualifications:
Experience with logic synthesis techniques to optimize Register-Transfer Level (RTL) code, performance and power as well as low-power design techniques.
Experience with design sign off and quality tools (Lint, CDC, VCLP etc.).
Experience in a scripting language like Python or Perl.
Knowledge of SoC architecture and assertion-based formal verification.
Knowledge of one of these areas, PCIe, UCIe, DDR, AXI, ARM processors family.
Knowledge of high performance and low power design techniques.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8473037
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our company's direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
In this role, you will be part of a team developing Application-specific integrated circuits (ASICs) used to accelerate networking in data centers. You will have multiple responsibilities in areas such as project definition, design, and implementation. You will participate in the design, architecture, documentation, and implementation of the next generation of data center accelerators.You will also be responsible for performance analysis for an end-to-end networking stack using your knowledge.
The ML, Systems, and Cloud AI (MSCA) organization at our company designs, implements, and manages the hardware, software, machine learning, and systems infrastructure for all our company services (Search, YouTube, etc.) and our company Cloud. Our end users are our companyrs, Cloud customers and the billions of people who use our company services around the world.
We prioritize security, efficiency, and reliability across everything we do - from developing our latest TPUs to running a global network, while driving towards shaping the future of hyperscale computing. Our global impact spans software and hardware, including our company Clouds Vertex AI, the leading AI platform for bringing Gemini models to enterprise customers.
Responsibilities
Lead an ASIC subsystem.
Understand how it interacts with software and other ASIC subsystems to implement data center networks.
Define hardware/software interfaces. Write micro architecture and design specifications.
Define efficient micro-architecture and block partitioning/interfaces and flows.
Collaborate closely with software, verification, and physical design stakeholders to ensure the designs are complete, correct, and performant.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field, or equivalent practical experience.
10 years of experience architecting networking ASICs from specification to production.
Experience developing Register-Transfer Level (RTL) for ASIC subsystems.
Experience with cross-functional engagement in micro-architecture, design, verification, logic synthesis, and timing closure.
Preferred qualifications:
Experience working with software teams optimizing the hardware/software interface.
Experience working with design networking like: Remote Direct Memory Access (RDMA) or packet processing and system design principles for low latency, high throughput, security, and reliability.
Experience in Transmission Control Protocol (TCP), IP, Ethernet, Peripheral Component Interconnect Express (PCIE) and Dynamic Random Access Memory (DRAM) including Network on Chip (NoC) principles and protocols (AXI, ACE, and CHI).
Experience architecting networking switches, end points, and hardware offloads.
Understanding of packet classification, processing, queuing, scheduling, switching, routing, traffic conditioning, and telemetry.
Proficiency in procedural programming language (e.g., C++, Python, Go).
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8473051
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our company's direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
As a SoC Physical Design Engineer, you will collaborate with functional design, Design for Testing (DFT), architecture, and packaging engineers. In this role, you will solve technical problems with innovative micro-architecture and practical logic circuits solutions, while evaluating design options with optimized performance, power, and area in mind.
The AI and Infrastructure team is redefining whats possible. We empower our company customers with breakthrough capabilities and insights by delivering AI and Infrastructure at unparalleled scale, efficiency, reliability and velocity. Our customers, our company Cloud customers, and billions of our company users worldwide.
We're the driving force behind our company's groundbreaking innovations, empowering the development of our cutting-edge AI models, delivering unparalleled computing power to global services, and providing the essential platforms that enable developers to build the future. From software to hardware our teams are shaping the future of world-leading hyperscale computing, with key teams working on the development of our TPUs, Vertex AI for our company Cloud, our company Global Networking, Data Center operations, systems research, and much more.
Responsibilities
Use problem-solving and simulation techniques to ensure performance, power, and area (PPA) are within defined requirements.
Collaborate with cross-functional teams to debug failures or performance shortfalls and meet program goals in lab or simulation.
Design chips, chip-subsystems, or partitions within subsystems from synthesis through place and route, and sign off convergence, ensuring that the design meets the architecture goals of power, performance, and area.
Develop, validate, and improve Electronic Design Automation (EDA) methodology for a specialized sign off or implementation domain to enable cross-functional teams to build and deliver blocks that are correct by construction and ease convergence efforts.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field, or equivalent practical experience.
5 years of experience with System on a Chip (SoC) cycles.
Experience with advanced design, including clock/voltage domain crossing, DFT, and low power designs.
Experience in high-performance, high-frequency, and low-power designs.
Preferred qualifications:
Master's degree or PhD in Electrical Engineering, Computer Engineering or Computer Science, with an emphasis on computer architecture.
Experience with scripting languages such as Perl, Python, or Tcl.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8475348
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our company's direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
In this role you will help to manufacture the SoCs that power these data centers by developing and deploying comprehensive manufacturing test and data analytics solutions for high volume manufacturing at wafer fabs and OSATs. This is an opportunity to create silicon in the most advanced technologies and follow it into the field to close the loop back to design and test for the next generation of chips. You'll help to integrate SoC technologies into devices and drive manufacturing test flows to assure performance and screen devices. You will drive yield improvement, cost optimization and work closely with cross functional teams to ensure the optimal test coverage in production to ensure high quality SoCs. You will have an understanding of IC flows, wafer processing, testing, qualification, diagnostics, and failure analysis. You will help design, deploy and maintain hardware required to screen high performance compute silicon at various stages of the manufacturing pipeline.
The AI and Infrastructure team is redefining whats possible. We empower our company customers with breakthrough capabilities and insights by delivering AI and Infrastructure at unparalleled scale, efficiency, reliability and velocity. Our customers, our company Cloud customers, and billions of our company users worldwide.
We're the driving force behind our company's groundbreaking innovations, empowering the development of our cutting-edge AI models, delivering unparalleled computing power to global services, and providing the essential platforms that enable developers to build the future. From software to hardware our teams are shaping the future of world-leading hyperscale computing, with key teams working on the development of our TPUs, Vertex AI for our company Cloud, our company Global Networking, Data Center operations, systems research, and much more.
Responsibilities
Manage ATE platform setup (including loadboard/probecard design) and change kit, SLT bench platform, and handler.
Identify and screen potential vendors (including technological and budgetary assessment) and track and verify progress at all stages of the design.
Define probecard and loadboard requirements based on testing strategy, accounting for test time, tester memory, and budget.
Review SI/PI simulations and final design signoff.
Validate probecard and loadboard hardware and open testing pipeline.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field, or equivalent practical experience.
5 years of experience in multi-disciplinary semiconductor hardware engineering and systems.
Experience in loadboard or probecard design, including SI/PI simulations, layout reviews, and schematic reviews.
Experience in Automated Test Equipment (ATE) test methodologies and their impact on hardware requirements/design.
Preferred qualifications:
Experience with semiconductor handlers, including Chroma or Hontech.
Experience in BurnIn hardware.
Experience managing the complete test hardware life-cycle, from initial design and NPI enablement through to final production deployment.
Experience in multi-disciplinary thermo-electro-mechanical systems.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8473098
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our company's direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
The AI and Infrastructure team is redefining whats possible. We empower our company customers with breakthrough capabilities and insights by delivering AI and Infrastructure at unparalleled scale, efficiency, reliability and velocity. Our customers, our company Cloud customers, and billions of our company users worldwide.
We're the driving force behind our company's groundbreaking innovations, empowering the development of our cutting-edge AI models, delivering unparalleled computing power to global services, and providing the essential platforms that enable developers to build the future. From software to hardware our teams are shaping the future of world-leading hyperscale computing, with key teams working on the development of our TPUs, Vertex AI for our company Cloud, our company Global Networking, Data Center operations, systems research, and much more.
Responsibilities
Define the SoC/block level design document such as interface protocol, block diagram, transaction flow, pipeline, etc.
Perform Register-Transfer Level (RTL) development (e.g., coding and debug in Verilog, System Verilog), function/performance simulation debug and Lint/Cyber Defense Center/Formal Verification/Unified Power Format checks.
Participate in synthesis, timing/power closure, and Application-Specific Integrated Circuit (ASIC) silicon bring-up.
Participate in test plan and coverage analysis of the block and SOC-level verification.
Communicate and work with multi-disciplined and multi-site teams.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field, or equivalent practical experience.
8 years of experience with digital reasoning design principles, Register-Transfer Level (RTL) design concepts, and languages such as Verilog or System Verilog.
Experience with reasoning synthesis techniques to optimize Register-Transfer Level (RTL) code, performance and power and design techniques.
Experience in reasoning design and debug with Design Verification (DV).
Preferred qualifications:
Experience with a scripting language like Python or Perl.
Experience with design sign-off and quality tools (e.g., Lint, clock domain crossing (CDC), etc).
Knowledge of System on a chip (SOC) architecture and assertion-based formal verification.
Knowledge of design techniques.
Knowledge in one of these areas: Peripheral Component Interconnect Express (PCIe), Universal Chiplet Interconnect Express (UCIe), Double Data Rate SDRAM (DDR), Advanced Extensible Interface (AXI), ARM processors.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8473605
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our company's direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
The ML, Systems, & Cloud AI (MSCA) organization at our company designs, implements, and manages the hardware, software, machine learning, and systems infrastructure for all our company services (Search, YouTube, etc.) and our company Cloud. Our end users are our companyrs, Cloud customers and the billions of people who use our company services around the world.
We prioritize security, efficiency, and reliability across everything we do - from developing our latest TPUs to running a global network, while driving towards shaping the future of hyperscale computing. Our global impact spans software and hardware, including our company Clouds Vertex AI, the leading AI platform for bringing Gemini models to enterprise customers.
Responsibilities
Define and implement solutions for complex design, integration and verification problems using in-house and external technical solutions or tools. Ensure chip quality by implementing best practices and implementing quality control measures.
Involve in project development and convergence with the highest quality, agreement with issues as they arise through design and implementation, or equivalent relevant experience.
Connect between RTL design, physical design, DFT, external IPs and SoC while maintaining project priorities.
Maintain project infrastructure and stability.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, a related field, or equivalent practical experience.
4 years of experience with design from micro-architecture through implementation with Verilog/SystemVerilog, or VHSIC Hardware Description Language (VHDL).
Experience in scripting.
Preferred qualifications:
Master's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field.
Excellent multitask and facilitation skills.
Excellent problem-solving and communication skills.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8472807
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our company's direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
The ML, Systems, & Cloud AI (MSCA) organization at our company designs, implements, and manages the hardware, software, machine learning, and systems infrastructure for all our company services (Search, YouTube, etc.) and our company Cloud. Our end users, Cloud customers and the billions of people who use our company services around the world.
We prioritize security, efficiency, and reliability across everything we do - from developing our latest TPUs to running a global network, while driving towards shaping the future of hyperscale computing. Our global impact spans software and hardware, including our company Clouds Vertex AI, the leading AI platform for bringing Gemini models to enterprise customers.
Responsibilities
Utilize performance and power models from the architecture team, as well as lab measurements, to validate and tune performance against established goals.
Design and build tests to verify that the SoC design meets those targets.
Develop and implement advanced technologies for running benchmark representations on pre-silicon environments.
Analyze problems, identify core design weaknesses, and drive the resolution of performance issues in both pre and post-silicon environments.
Develop performance measurement frameworks, including key performance indicators (KPIs), to produce regular reports and dashboards that support stakeholder decision-making.
Requirements:
Minimum qualifications:
Bachelor's degree in Computer Science, Computer Engineering, or Electrical Engineering, or equivalent experience.
5 years of experience in SoC or CPU performance and power modeling, analysis, and debugging.
Experience in programming languages such as C, C++, or similar.
Preferred qualifications:
Experience with hardware description languages like Verilog or SystemVerilog.
Experience in pre and post-silicon analysis and debugging.
Experience in one or more functional areas, such as coherent fabrics (e.g., AMBA CHI/AXI), memory controllers (e.g., LPDDR5, DDR5), or I/O controllers (e.g., PCIe, CXL).
Experience in productizing features that enhance the performance or power characteristics of a design.
Experience in building fast, accurate SoC/CPU performance models in C++ with, the ability to identify, troubleshoot, and solve performance problems.
Understanding of computer architecture fundamentals, especially in areas like interconnects, traffic QoS, distributed caches, and I/O flows.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8473578
סגור
שירות זה פתוח ללקוחות VIP בלבד