דרושים » הנדסה » SystemC Modeling Expert

משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 19 שעות
חברה חסויה
Location: Haifa
Job Type: Full Time
Our RADAR VLSI Team is looking for an Embedded SW Engineer for SystemC Modeling that include Performance and Program view Modeling. You will be part of VLSI emulation team , working on current and next-generation designs for next generation sensors.
The SystemC models are fundamental parts of the VLSI chip infrastructure, they are used during HW architecture definition phase and by SW developers for system shift left.
What will your job look like:
You will work on Critical performance analysis and optimizations on the ASIC micro architecture as multi-NOC , DDR and CPU .
You will work on developing SystemC models that describe the RTL models on High level language and enable true system . level shift left for the embedded SW team.
You will have the opportunity to work on state-of-the-art simulation and profiling tools and adopt them to our needs.
You will work closely with HW architects and SW/Algorithms developers.
Requirements:
BSc in Computer-Science, Computer Engineering or Electrical Engineering.
5+ years of experience on SystemC Modeling -Must
5+ years of experience in embedded SW.
knowledge in shell scripting and Python.
Strong communication, co-working, and listening skills.
Experience working with Synopsys tools as Power architect and Virtualizer Advantage.
Knowledge in assembly languages and hardware design aspects Advantage.
This position is open to all candidates.
 
Hide
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8230192
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות דומות שיכולות לעניין אותך
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 20 שעות
חברה חסויה
Location: Haifa
Job Type: Full Time
We are looking for a Emulation Engineer to join the Radar VLSI team and drive the development of the next generation ASIC Sensors.
What will your job look like:
This role is all about making high-end Emulation environment base on new designs.
Building and integrating complex components, working with cross-functional engineering teams, and making systems that will change the way we drive.
This role requires an engineer who loves challenges and knows how to bring engineering excellence while considering complicated constraints.
You will work with members of a cross-functional talented,
You will lead the Emulation development for the VLSI team.
You will work closely with SW Engineers, Logic Engineers, Verification Engineers, and others.
You will serve as an expert matter for your domain, which has the full responsibility to drive & implement improvements and new ideas.
Requirements:
BSc in Electrical Engineering, Computer Science, or Computer Engineering.
5+ years of experience in emulation and Hands-on experience with emulation tools ( Palladium/ZeBu/Haps).
3+ of experience Designing logic (Verilog/System Verilog) , Verification (UVM) - an advantage
Hands-on bring-up and debugging of PCBs that have standard digital interfaces (e.g., SPI, I2C, MIPI)- - an advantage
Working with multiple cross-functional teams (e.g. software, Logic, Verification) .
Using standard lab equipment (e.g., multimeters, oscilloscopes, spectrum analyzers).
Team player and excellent communication skills.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8230000
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our company's direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
In this role, you will work with internal system teams and the System-on-Chip (SoC) Architecture team to develop an understanding of the SoC, performance metrics, benchmarks/measuring tools, and available optimization knobs. You will define methods and technologies to model SoC performance at different accuracy levels by supporting architectural explorations and decision-making. In addition, you will correlate performance projections with measured post-silicon data.
The ML, Systems, & Cloud AI (MSCA) organization at our company designs, implements, and manages the hardware, software, machine learning, and systems infrastructure for all our company services (Search, YouTube, etc.) and our company Cloud. Our end users are our companyrs, Cloud customers and the billions of people who use our company services around the world.
We prioritize security, efficiency, and reliability across everything we do - from developing our latest TPUs to running a global network, while driving towards shaping the future of hyperscale computing. Our global impact spans software and hardware, including our company Clouds Vertex AI, the leading AI platform for bringing Gemini models to enterprise customers.
Responsibilities
Develop simulators and architectural models of general-compute SoCs.
Collaborate with system architects, SoC and IP architects/designers, and software and application experts to understand current and future requirements.
Participate in architectural and design evaluation of SoC designs.
Perform pre-silicon performance simulation and correlate with post-silicon measurements.
Communicate analysis results qualitatively and quantitatively.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Science, or equivalent practical experience.
8 years of experience with C++ and Python.
Experience with analysis of multi-core SoC workload performance.
Experience creating or integrating simulation models of multi-core SoC subsystems at different levels of abstraction (e.g., cycle-accurate and TLM).
Preferred qualifications:
Experience with systemC.
Experience with SoC cycles in SoC performance modeling and analysis.
Knowledge of caches, mesh fabric, coherency, memory controllers, DRAM, PCIe, CPU, or GPU.
Ability to read, debug, and modify RTL and work with design flow, tools, and verilog language.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8187424
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
05/06/2025
Location: Haifa
Job Type: Full Time
We are looking for an experienced engineer for the Nitro cards product team. Our products include the most advanced interfaces and technologies and widely used across our data centers as backbone for Nitro and other services. The candidate will serve as expert for Nitro HW power domain - ensuring best design, integration and operational health for power domain for our Nitro cards in our data centers.

As a member of a product team you will own complex system debugs involving HW, FW and SW components. You will deal with functional and integration aspects related to complex systems focusing on the power domain related to Nitro HW. You will be involved in architecture decisions, integrations, deployments and debugging related to complex systems while also providing remote and on-site support to our global colleagues.
You will also provide leadership by driving the teams around you to raise the bar and deliver higher quality product on behalf of our customers. This is a fast-paced, intellectually challenging position, and you will work with thought leaders in multiple areas of technology. You will set high standards for yourself and everyone you work with, and will be constantly looking for ways to improve the performance, quality, cost and reliability of products and services you own. We are changing an industry, and we want individuals who are ready for this challenge and want to reach beyond what is possible today.

Key job responsibilities:
- Lead triage, debug and root cause analysis of Nitro HW Power domain related issues in our systems (card / system level).
- Enhancing the ability to trouble shot issues and driving for closure of in-fleet problems.
- Analyze customers` mode of work / requirements and provide resolutions accordingly.
- Co-work with Annapurna Labs monitoring team and other root cause teams to improve quality and reliability of products operation in the fleet.
- Provide Annapurna Labs Board, ASIC and system design, SW and testing development, QA and architecture teams information and requirements from customers fleet operation perspectives and represent the customer voice.
- Drive and maintain trainings, quality documentation and collateral in order to improve in-fleet operation.
- Design and define various tools and scripts to provide support to projects and customize it as per requirement.
- Willing to travel per need few times a year.
Requirements:
BASIC QUALIFICATIONS:
- B.Sc. in one of the following: Electrical / Computer Engineering, or a related field.
- 7+ years of experience in designing boards / systems involving power circuitry.
- High level of expertise in power circuitry design and integration.
- Basic skills in scripting: Python / Bash etc.
- Experience in driving cross team and cross disciplinary activities.

PREFERRED QUALIFICATIONS:
- 10+ years Design and Debug / Integration Experience in systems involving HW, FW and SW.
- Advanced programming skills.
- Computer architecture knowledge (design or architecture) for x86 / ARM.
- Experience with operating systems, boot loaders, networking, and remote debugging.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8205950
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our company's direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
In this role, you will use Application-Specific Integrated Circuit (ASIC) design to be part of a team that creates the System on a Chip (SoC) design cycle from start to finish. You will collaborate with design and verification engineers in projects, creating architecture definitions with Register-Transfer Level (RTL) coding, and running block level simulations. You will contribute in ASIC designs from design specification to production. You will collaborate with members of architecture, software, verification, power, timing, synthesis and more to specify and deliver high quality SoC/RTL. You will also solve technical problems with micro-architecture and solutions, and evaluate design options with performance, power, and area.The ML, Systems, & Cloud AI (MSCA) organization at our company designs, implements, and manages the hardware, software, machine learning, and systems infrastructure for all our company services (Search, YouTube, etc.) and our company Cloud. Our end users are our companyrs, Cloud customers and the billions of people who use our company services around the world.
We prioritize security, efficiency, and reliability across everything we do - from developing our latest TPUs to running a global network, while driving towards shaping the future of hyperscale computing. Our global impact spans software and hardware, including our company Clouds Vertex AI, the leading AI platform for bringing Gemini models to enterprise customers.
Responsibilities
Define the SoC/block level design document such as interface protocol, block diagram, transaction flow, pipeline, etc.
Perform Register-Transfer Level (RTL) development (e.g., coding and debug in Verilog, System Verilog), function/performance simulation debug and Lint/Cyber Defense Center/Formal Verification/Unified Power Format checks.
Participate in synthesis, timing/power closure, and Application-Specific Integrated Circuit (ASIC) silicon bring-up.
Participate in test plan and coverage analysis of the block and SOC-level verification.
Communicate and work with multi-disciplined and multi-site teams.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, or a related field, or equivalent practical experience.
3 years of experience with digital reasoning design principles, Register-Transfer Level (RTL) design concepts, and languages such as Verilog or System Verilog.
Experience with reasoning synthesis techniques to optimize Register-Transfer Level (RTL) code, performance and power as well as low-power design techniques.
Experience in reasoning design and debug with Design Verification (DV).
Preferred qualifications:
Experience with a scripting language like Python or Perl.
Experience with design sign off and quality tools (e.g. Clock Domain Crossing (CDC), etc.)
Knowledge of SOC architecture and assertion-based formal verification.
Knowledge in one of these areas: Peripheral Component Interconnect Express (PCIe), Universal Chiplet Interconnect Express (UCIe), Double Data Rate SDRAM (DDR), Advanced eXtensible Interface (AXI), ARM processors.
Knowledge of high performance and low power design techniques.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8187439
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 20 שעות
Location: Haifa
Job Type: Full Time
Our Autonomous Driving group in Haifa is looking for an Electrical Validation & Embedded SW Engineer. This is an exciting opportunity to join a growing team of highly talented engineers, working on the worlds most advanced SoCs for ADAS and self-driving vehicles.
Electrical Validation engineers enable, debug, and validate high-speed interfaces - like LPDDR4/5, PCIe Gen4/5, and CDPHY - using high-end Lab measurement equipment and advanced SW tools. This dynamic work environment requires interfacing with Silicon and hardware design engineers, Software developers, Signal Integrity, and System Validation teams. The proximity to Signal/Power integrity simulation activities - we are a single SI/EV team - is another powerful advantage, enabling joint simulation-measurement effort.
What will your job look like:
You will join a relatively small team of talented and experienced EV/SI/PI engineers with wide scope of responsibility, from Pre-Si SI/PI simulations to Post-Si Electrical validation and debug, covering all the high-speed analog interfaces of our EyeQ products.
Responsibilities include performing electrical spec compliance and system margin validation, interface optimization, statistical results analysis, validation flow definitions, and automation, etc.
You will also deal with FW development, automation enabling, data post-processing and debug of high-speed interfaces, like LPDDR4/5, PCIe Gen4/5, and D/C/MPHY.
Requirements:
BSc or MSc in Electrical or Computer engineering
3+ years of hands-on experience in validation or HW/SW debug, including the use of advanced lab equipment (Scope, BERT, etc.)
Hands-on experience with test automation development or FW development or automated data analysis
Strong debugging and advanced analysis experience
Experience in Signal/Power Integrity design- An advantage
Experience with analog circuits or PHY IP knowledge - An advantage
Strong sense of ownership, commitment, and responsibility
Good interpersonal communication skills.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8229978
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Hod Hasharon and Haifa
Job Type: Full Time
We are currently looking for a Performance Simulation Expert develop and evaluate next generation performance features as well as develop the future generation of our Compute system simulation infrastructure, models and analysis tools
Responsibilities:
Develop and analyze performance and power features in our cycle accurate pre-silicon model and improve the accuracy of the current Server system simulator
Design the architecture of the new generation system simulation platform that will be used to analyze performance of Server (Compute and AI) workloads and identify performance bottlenecks
Develop new technologies, methodologies and tools for simulation. Analysis and debug of applications and workload on Huawei servers
Propose and simulate optimizations and innovations on the HW and SW in order to improve server performance for given workloads
Distribute the simulation platform, train and support other teams in China and in Europe using the simulation platform, technology and methodology.
Requirements:
MSc or BSc in computer science/EE or area related to computer architecture, or equivalent research experience in industry
At least 7 years of relevant research and development experience in industry and academia in the following areas:
Computer architectures: instruction set architecture, microarchitecture, cache sub-system, memory sub-system, NOC, interconnect
Workload characterization and analytical model generation
System Modelling and emulation of HW.
Simulation of Software workloads and Software applications on HW simulator
Ability to provide innovation and global vision throughout the company
Excellent communication, presentation and reporting skills
Experience working with highly technical teams and communicating to non-technical partners.
Excellent oral and written English.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8183653
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 19 שעות
Location: Haifa
Job Type: Full Time
Our Unit Level Verification Team in Haifa is looking for an experienced verification engineer to be involved in the development of our future AI and deep learning HW accelerators.
This is an exciting opportunity to join a team of highly talented engineers, working on the most cutting-edge technologies to deliver our EyeQ future chips, aimed to power the worlds first fully Autonomous Vehicle!
What will your job look like?
Define, implement and enhance verification environments using UVM methodology.
Write and debug tests that combine UVM methodology and SW code.
Identify and write various types of coverage measures.
Collaborate with designers, architects, and SW developers from Haifa and Jerusalem teams to deliver the most comprehensive verification environment.
Integrate Industry Standard (such as AXI and OCP) and other 3rd party VIPs.
Requirements:
BSc in electrical engineering, computer engineering, or computer science
8+ years of experience working in verification environment, tests, and test bench development (SV/UVM/C/C++)
System Verilog writing skills, preferably in OVM/UVM
SW embedded experience, C/C++ skills
TestPlan defining and Coverage-Driven Verification experience
3rd-party IPs integration testing experience
Waveform debugging with the latest EDA tools, root-cause bugs independently
Skills in scripting Perl/Python - Advantage
Knowledge in Industry Standard protocols such as AXI/OCP/APB - Advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8230072
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
About the job
Be part of a diverse team that pushes boundaries, developing custom silicon solutions that power the future of our company's direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
In this role, you will work as part of a Research and Development team. You will build verification components, constrained-random testing, system testing, and verification closure. You will verify digital designs and collaborate with design and verification engineers in projects and perform direct verification. You will build efficient and effective constrained-random verification environments that exercise designs through their corner-cases and expose all types of bugs. You will manage the full lifecycle of verification which can range from verification planning, test execution or collecting, and closing coverage.
The ML, Systems & Cloud AI (MSCA) organization at our company designs, implements, and manages the hardware, software, machine learning, and systems infrastructure for all our company services (Search, YouTube, etc.) and our company Cloud. Our end users are our companyrs, Cloud customers and the billions of people who use our company services around the world.
We prioritize security, efficiency, and reliability across everything we do - from developing our latest TPUs to running a global network, while driving towards shaping the future of hyperscale computing. Our global impact spans software and hardware, including our company Clouds Vertex AI, the leading AI platform for bringing Gemini models to enterprise customers.
Responsibilities
Plan the verification of digital design blocks by understanding the design specification and interacting with design engineers to identify important verification scenarios.
Create and enhance constrained-random verification environments using SystemVerilog or formally verify designs with Strategic Value Add (SVA) and industry leading formal tools.
Identify and write all types of coverage measures for stimulus and corner-cases.
Debug tests with design engineers to deliver functionally correct design blocks.
Close coverage measures to identify verification holes and to show progress towards tape-out.
Requirements:
Minimum qualifications:
Bachelor's degree in Electrical Engineering or equivalent practical experience.
Experience working with design networking like Remote Direct Memory Access (RDMA) or packet processing and system design principles for low latency, high throughput, security, and reliability.
Experience in creating and using verification components and environments in standard verification methodology.
Preferred qualifications:
Experience in verifying digital systems using standard Internet Protocol (IP) components or interconnects (e.g., microprocessor cores, hierarchical memory subsystems).
Experience in Transmission Control Protocol (TCP), IP, Ethernet, PCIE and Dynamic random-access memory (DRAM), Network on Chip (NoC) principles and protocols.
Experience in estimating performance by analysis, modeling, and network simulation in defining and driving performance test plans.
Experience with verification techniques, and the full verification life cycle.
Experience with performance verification of ASICs and ASIC components.
Experience with ASIC standard interfaces and memory system architecture.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8187458
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
About the job
Be part of a team that pushes boundaries, developing custom silicon solutions that power the future of our company's direct-to-consumer products. You'll contribute to the innovation behind products loved by millions worldwide. Your expertise will shape the next generation of hardware experiences, delivering unparalleled performance, efficiency, and integration.
As a System on a Chip (SoC) Power Engineer in our company Cloud, you will be part of the server chip design team. You will work on Power related flows across the chip development end to end. You will have the opportunity to impact the company Cloud Infrastructure, combine the latest innovations in algorithms and integrate circuits to create CPU SoC solutions for our company Cloud. You will partner with hardware, software, and data center controls teams to provide silicon and technology roadmaps.
The ML, Systems, & Cloud AI (MSCA) organization at our company designs, implements, and manages the hardware, software, machine learning, and systems infrastructure for all our company services (Search, YouTube, etc.) and our company Cloud. Our end users are our companyrs, Cloud customers and the billions of people who use our company services around the world.
We prioritize security, efficiency, and reliability across everything we do - from developing our latest TPUs to running a global network, while driving towards shaping the future of hyperscale computing. Our global impact spans software and hardware, including our company Clouds Vertex AI, the leading AI platform for bringing Gemini models to enterprise customers.
Responsibilities
Develop methodology of SoC roll up of power reduction, projection, configuration, test plan and tools.
Work intact with Architecture, Frontend and Backend teams driving power reduction features (both logic and circuit).
Manage power delivery and packaging teams with simulations and scenario definitions.
Work intact with Architecture and DV to define power scenarios and tests, debug, and integrate into the flow.
Track whether power goals are met throughout execution.
Requirements:
Minimum qualifications:
Bachelor's degree in Computer Science, Electrical Engineering, or a related technical field, or equivalent practical experience.
8 years of experience with power modeling, power delivery, and power distribution network/design.
Experience in power estimation and optimization flows and tools.
Experience with Vector based Physical Design Power Tools (e.g. PTPX Prime power).
Preferred qualifications:
Experience with power optimization techniques (multi Vth/power/voltage domain design, clock gating, power gating, DVFS/AVS, etc.) and power management.
Experience with scripting languages (i.e., Python, Perl, TCL or Bash).
Knowledge of the impact of software and architectural design decisions on power and thermal behavior of the system (thermal mitigation and scheduling, cross-layer policy design).
Knowledge of system software components (i.e., Linux, drivers, runtime performance analysis, etc.).
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8187442
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 20 שעות
Location: Haifa
Job Type: Full Time
Required Experienced Physical Design Engineer
The EyeC VLSI team designs chips for RADAR systems used in ADAS and autonomous vehicles. Our Physical Design team operates in a startup-like environment, emphasizing technical expertise, execution, and ownership. Each engineer in the Physical Design team takes full responsibility for their work, from initial definition through execution and final sign-offs. Engineers collaborate closely with design and architecture teams to develop constraints, conduct design reviews, and implement RTL modifications to ensure convergence.
We are seeking an Experienced Backend to join our growing Physical Design team. In this role, you will play a key part in the design of state-of-the-art SoCs, from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS.
Floorplan exploration with guidance and collaboration with front-end and architecture teams.
STA: work with FE and floor planner to manage block and top level constraints and 1st level of timing analysis.
Synthesis exploration and final synthesis netlist: Scan insertion @ synthesis, clean checks from Lint, UPF & Spyglass.
Place & Route: from Synthesis netlist to final layout and signoff verification with target to achieve best power performance and area.
Signoff : on all physical design domains- STA, IR/EM, Physical Verification, Logic Equivalent Checking, Low Power Verification.
Requirements:
BSc or MSc degree in Computer Engineering or Electrical Engineering.
3+ years experience in the physical design field.
Experience in scripting languages like Tcl/python/Perl/tcsh.
Team player with excellent communication skills, customer orientation, and a can-do attitude.
Experience in relevant domains - Advantage.
Building or maintaining implementation tools and flow Advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8230022
סגור
שירות זה פתוח ללקוחות VIP בלבד