לוח משרות דרושים מהנדס אלקטרוניקה, לחיפוש זה נמצאו 338 משרות

we are seeking for an experienced Lead ATE Development Engineer to take ownership of the end-to-end design and implementation of test solutions for airborne systems and electronic assemblies. In this role, you will define the testing strategy, develop advanced test equipment, and integrate test capabilities across development, integration, and manufacturing processes.
Job Description:
Lead the design and development of Automated Test Equipment (ATE) for electronic boards, assemblies, and airborne systems.
Define test architectures, requirements, interfaces, and test coverage methodologies.
Design and integrate hardware, wiring, measurement equipment, simulators, and test software.
Develop engineering specifications, test procedures, operating instructions, and technical documentation.
Perform verification and validation activities, troubleshoot failures, and improve diagnostic capabilities.
Promote Design for Testability (DFT) practices in collaboration with hardware, software, and system engineering teams.
Support the transition of test systems from development to production and assist with qualification and acceptance testing.
Manage technical interactions with suppliers and subcontractors.

We are looking for a talented and experienced engineer to participate in the physical design of the companys product for leading one of our BE projects. This position involves working with external back-end developers as well as carrying out critical tasks in-house, and leading aggressive back-end initiatives to meet challenging targets in terms of area, timing, and layout. In this role, you will be at the center of the companys design efforts and will have a significant influence on product architecture.

Responsibilities
Generate and analyze critical block- and chip-level static timing constraints
Spec and define full chip floor plan, including pin placement, partitions, and power grid.
Develop and validate high-performance, low-power clock network guidelines.
Perform critical block-level place and route and create designs that meet timing, area, and power constraints.
Review the vendors physical design verification flow at chip and block level and guide other designers on how to fix LVS and DRC violations.
Work with vendors on defining physical design methodologies and assist in flow development for chip integration.

We are looking for a talented and experienced Physical Design lead to take part in the physical design and help lead the companys BE activities . This position involves working with external back-end developers as well as carrying out critical tasks in-house, and leading aggressive back-end initiatives to meet challenging targets in terms of area, timing, and layout. In this role, you will be at the center of the companys design efforts and will have a significant influence on our final product.

Responsibilities
Lead blocks and sub systems execution from RTL to GDSII.
Clearly reflect status and execution metrics and help identify and solve execution bottlenecks.
Spec and define full floor plan, including pin placement, partitions, and power grid.
Develop and validate high-performance, low-power clock network guidelines.
Perform critical block-level place and route and create designs that meet PPA targets.
Review the vendors physical design verification flow at chip and block level and guide other designers on how to fix LVS and DRC violations.
Work with vendors on defining physical design methodologies and assist in flow development for chip.

We are looking for an experienced Senior Signal Integrity Engineer to join our Hardware Engineering team. This role focuses on ensuring optimal signal integrity for high-speed interfaces, including Ethernet, PCIe, DDR5, and other next-generation technologies. As part of the team, you will be responsible for performing signal integrity analysis, developing signal integrity models, and ensuring electrical compliance for high-speed SERDES I/Os.
Responsibilities:
Conduct signal integrity analysis and simulations for high-speed interfaces such as 112Gbps Ethernet, PCIe Gen5, and DDR5 interfaces.
Develop and implement signal integrity guidelines for PCB design, ensuring high-performance and low-loss signal paths.
Analyze and resolve signal integrity issues related to high-speed interfaces, including reflection, crosstalk, and power delivery network (PDN) issues.
Collaborate with PCB layout engineers to optimize design for signal integrity, ensuring compliance with electrical standards and high-speed design best practices.
Perform time-domain and frequency-domain analysis, including loss, jitter, and eye-diagram analysis.
Utilize EDA tools such as Ansys SIWAVE, HFSS, or similar for simulation and validation of signal integrity designs.
Work closely with cross-functional teams to integrate signal integrity considerations into the overall hardware design process.
Develop behavioural models based on measured signal integrity data to inform future design and simulation work.
Conduct pre- and post-layout simulations and measurements for high-speed signal interfaces.

In this role, you will be leading all aspects of verification and will have a critical impact on the company's R&D path.



Responsibilities:

Define and implement robust SV/UVM verification solutions, including test benches and methodologies, to drive efficient verification closure across block-level and full-chip designs, integrating Mix-signals SoC simulation environment using Verilog, MATLAB, HW/SW Co-simulation and lab integration.
Work closely with Digital Design, Analog Design, Software, Back-end, SW and System teams to understand the functional, power and performance goals of the product and ensure its quality.

abra R&D is seeking a Integration Engineer – R&D to Production We are looking for a hands-on and technically skilled Integration Engineer to support the transition of complex systems from development to production. This role includes system integration, testing, and troubleshooting across both R&D labs and production lines. Full-time position – Based in Northern Israel. Key Responsibilities:
* Perform hardware and software integration activities according to project plans in both R&D and production environments
* Conduct system-level testing during advanced development stages
* Collect and escalate production issues to the appropriate teams (hardware, software, mechanics)
* Provide technical solutions for system operation under production constraints
* Support R&D labs: fault analysis, system setup, and Proof-of-Concept (POC) implementation

We are seeking an experienced Team Leader to lead our Failure Analysis engineering group within the Product Engineering team. You will be responsible for controlling and improving the quality of our hardware products through technical leadership, data-driven insights, and global production support. This role requires deep expertise in electronics systems, failure methodologies, production process control, and proven leadership capabilities across multiple geographies.



Key Responsibilities

Lead, mentor, and develop a team of failure analysis engineers while providing technical guidance on complex hardware issues.
Drive continuous improvement of quality KPIs through root cause analysis (RCA), statistical analysis, and yield optimization across all products.
Establish and implement standardized failure analysis methodologies, debug protocols, and quality control processes across global production sites.
Serve as the technical focal point for product design and functionality, supporting the team across RF, embedded, FPGA, high-speed communication, and mixed-signal systems.
Collaborate across Design, Manufacturing, Supply Chain, and Sales teams to resolve critical issues and prevent yield impact.
Manage vendor/supplier escalations and conduct design DFT/DFM (Design for Test/Manufacturability) analyses.
Lead investigation of production crises and manage critical path issues under time pressure.

We are looking for a hands-on FPGA Design Engineer, specialized in high-performance digital design and FPGA-based system development, as part of the QM-Platform team.

This role involves ownership of FPGA interfaces and connectivity logic, including high-speed communication blocks, platform integration, and close collaboration with embedded and hardware teams. You will work on complex FPGA/SoC platforms, enabling robust and scalable solutions for quantum control systems.

Responsibilities

Own the design and implementation of FPGA-based interfaces such as PCIe, I2C, SPI, and high-speed GT communication.
Develop and integrate FPGA logic on advanced platforms, including Xilinx UltraScale+ and Versal.
Collaborate closely with embedded, hardware, and system teams to ensure seamless HW/SW/FPGA integration.
Drive FPGA bring-up, debugging, and validation at both lab and system levels.
Participate in system architecture definition and cross-team design decisions.

The Product Validation department is looking for a Validation Engineer.
Our department is responsible for delivering high-quality ADAS (Advanced Driver Assistance Systems) products.
We are the first line of support for our customers around the globe, and as our Validation Engineer, you will interact with most of our departments to achieve our goals.
What will your job look like:
Perform system-level validation of embedded systems, covering both hardware and software, with a strong focus on functional testing
Design and maintain test environments, including lab setups, test systems, and configurations.
Write and execute test plans and test cases based on system requirements, including manual and automated tests.
Validate communication protocols and system interfaces, and perform hardware bring-up and integration testing.
Install and support debug systems and sensors on development vehicles and assist automotive customers during integration.

We are looking for an experienced Electronics Engineer / Practical Electronics Engineer to join our multidisciplinary R&D team and support the development of advanced electro-optical systems.
In this role, you will be responsible for electronic board bring-up, debugging, repair, testing, calibration, and system integration. You will work closely with electrical, mechanical, and system engineers throughout the product lifecycle, from early prototypes to production and deployment.
This position is ideal for someone who enjoys practical engineering work, solving complex hardware issues, and working on mission-critical technologies in a dynamic development environment.
Responsibilities:
Perform bring-up, debugging, validation, and repair of electronic boards for advanced electro-optical systems.
Troubleshoot analog, digital, power, and communication interfaces using oscilloscopes and other laboratory equipment.
Perform board-level modifications, rework, repairs, and validation according to engineering requirements.
Work closely with hardware design engineers to investigate failures, improve designs, and resolve technical issues.
Support PCB manufacturers and assembly partners throughout production, troubleshooting, and quality processes.
Execute and support environmental testing of electronic boards and electro-optical systems.
Collaborate with mechanical engineers on system integration, thermal considerations, cable routing, and assembly optimization.
Develop, document, and perform calibration procedures for electro-optical systems.
Document test results, failure analysis, corrective actions, and engineering activities.
Support continuous improvement of laboratory processes, production readiness, and engineering workflows.

We are looking for experienced Chip Design Engineers to join our team and take a key role in RTL design, new IP development, and SoC integration.

As part of the design team, you will be deeply involved in architectural exploration, protocol evaluation, and hands-on design work across multiple chip blocks.



Responsibilities

RTL design and implementation of new IPs
SoC integration and design ownership of chip subsystems
Exploration and evaluation of new protocols and architectural solutions
Close collaboration with architecture, verification, validation, software, and back-end teams
Delivering high-quality, best-in-class RTL that meets performance, power, and area goals