דרושים » הנדסה » Electrical Validation & Embedded SW Engineer

משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Haifa
Job Type: Full Time
Our Autonomous Driving group in Haifa is looking for an Electrical Validation & Embedded SW Engineer. This is an exciting opportunity to join a growing team of highly talented engineers, working on the worlds most advanced SoCs for ADAS and self-driving vehicles.
Electrical Validation engineers enable, debug, and validate high-speed interfaces - like LPDDR4/5, PCIe Gen4/5, and CDPHY - using high-end Lab measurement equipment and advanced SW tools. This dynamic work environment requires interfacing with Silicon and hardware design engineers, Software developers, Signal Integrity, and System Validation teams. The proximity to Signal/Power integrity simulation activities - we are a single SI/EV team - is another powerful advantage, enabling joint simulation-measurement effort.
What will your job look like:
You will join a relatively small team of talented and experienced EV/SI/PI engineers with wide scope of responsibility, from Pre-Si SI/PI simulations to Post-Si Electrical validation and debug, covering all the high-speed analog interfaces of our EyeQ products.
Responsibilities include performing electrical spec compliance and system margin validation, interface optimization, statistical results analysis, validation flow definitions, and automation, etc.
You will also deal with FW development, automation enabling, data post-processing and debug of high-speed interfaces, like LPDDR4/5, PCIe Gen4/5, and D/C/MPHY.
Requirements:
BSc or MSc in Electrical or Computer engineering
3+ years of hands-on experience in validation or HW/SW debug, including the use of advanced lab equipment (Scope, BERT, etc.)
Hands-on experience with test automation development or FW development or automated data analysis
Strong debugging and advanced analysis experience
Experience in Signal/Power Integrity design- An advantage
Experience with analog circuits or PHY IP knowledge - An advantage
Strong sense of ownership, commitment, and responsibility
Good interpersonal communication skills.
This position is open to all candidates.
 
Hide
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8229978
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות דומות שיכולות לעניין אותך
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Haifa
Job Type: Full Time
Required Power Integrity \ Signal Integrity Engineer
You will join a team of talented and experienced Signal/Power Integrity (SI/PI) & Electrical Validation engineers with wide scope of responsibility, from Pre-Silicon SI/PI simulations to Post-Silicon Electrical validation and debugging, covering all High-Speed interfaces and Power Delivery of our EyeQ ASIC products.
What will your job look like:
You will deal with design, simulations, optimization and debugging of high-speed interfaces - like LPDDR4/5, PCIe Gen4/5, C/DPHY, Multi Giga-Bit Ethernet, High-Speed interfaces over Power Cables, Power Delivery Networks.
You will develop Layout guidelines, review the physical design process and check its quality.
You will deal with state-of-the-art signal & power integrity simulation tools and methodologies, advanced results analysis, optimization/verification of the company and customers' PCB designs, etc.
This is a dynamic work environment that requires interfacing with Silicon & Hardware design engineers, IP providers, Electrical and System Validation teams, Customer Application Engineers, EDA tools vendors, and product managers.
The proximity to Electrical Validation activities - we are a single SI/EV team - is another strong advantage, enabling joint simulation-measurements efforts.
Requirements:
BSc or MSc in Electrical engineering or Physics.
At least 2 years of proven experience in SI/PI and/or RF simulations.
Knowledge in SI/PI/RF simulation tools, including 2.5D/3D extraction.
Knowledge in SI/PI theory, electro - magnetics.
Experience in custom digital/analog circuit design and transistor level simulations - advantage.
Experience in Electrical Validation - advantage
Experience in High-Speed PCB design - advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8230133
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Haifa
Job Type: Full Time
Required Senior IC Test Engineer
We are the Production Test team - responsible for the definition, development, and deployment of production test operations for the worlds most advanced SoCs for ADAS and self-driving vehicles.
This is your opportunity to join a team during its initial forming stage and leave your mark as we assume full ownership for its silicon production operations to enable high volume manufacturing for cutting-edge automotive products.
What will your job look like:
Work closely with the design teams from early stages of the design process to review DFX architecture and define test requirements.
Define test methodologies and generate test content for high-speed interfaces of embedded IP blocks (LPDDR4/5, PCIe Gen4/5, D/C/MPHY).
Test program coding, pattern conversion and pre-Si validation (virtual test simulations).
Support Load Board and Probe Card design activities.
Lead post-Si test program debug activities to enable delivery of samples to internal and external customers.
Test program characterization and tuning to enhance test program quality to meet automotive standards.
Support Quality & Reliability team to enable effective and timely qual plan execution.
Lead test deployment activities with tier-one Foundry and OSAT vendors to enable large-scale Wafer-Sort and Final-Test operations.
Requirements:
BSc or MSc degree in Electrical Engineering.
7+ years of experience as IC Product/Test engineer.
Hands on experience in bring-up & productization of complex IC products.
Prior experience with Teradyne UltraFlex/UltraFlexPlus is - significant advantage.
Deep understanding of structural DFT methods (scan, mbist, jtag, ).
Proficiency in C/C++ and scripting language (Perl, Python, ) in Unix environment.
Experience with data and yield analysis using known statistical methods and tools (e.g. JMP).
Familiarity with Verilog and RTL behavioral simulations an advantage
Strong sense of ownership, commitment, and responsibility.
Team player, with the ability to work in a rapidly evolving environment.
Good interpersonal communication skills.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8230172
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Haifa
Job Type: Full Time
Our Unit Level Verification Team in Haifa is looking for an experienced verification engineer to be involved in the development of our future AI and deep learning HW accelerators.
This is an exciting opportunity to join a team of highly talented engineers, working on the most cutting-edge technologies to deliver our EyeQ future chips, aimed to power the worlds first fully Autonomous Vehicle!
What will your job look like?
Define, implement and enhance verification environments using UVM methodology.
Write and debug tests that combine UVM methodology and SW code.
Identify and write various types of coverage measures.
Collaborate with designers, architects, and SW developers from Haifa and Jerusalem teams to deliver the most comprehensive verification environment.
Integrate Industry Standard (such as AXI and OCP) and other 3rd party VIPs.
Requirements:
BSc in electrical engineering, computer engineering, or computer science
8+ years of experience working in verification environment, tests, and test bench development (SV/UVM/C/C++)
System Verilog writing skills, preferably in OVM/UVM
SW embedded experience, C/C++ skills
TestPlan defining and Coverage-Driven Verification experience
3rd-party IPs integration testing experience
Waveform debugging with the latest EDA tools, root-cause bugs independently
Skills in scripting Perl/Python - Advantage
Knowledge in Industry Standard protocols such as AXI/OCP/APB - Advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8230072
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
25/06/2025
חברה חסויה
Location: Haifa
Job Type: Full Time
Our K2Core SW team is looking for a Lead System Test Engineer to define and execute the system validation strategy for the Nitro K2 card. In this technical leadership role, you will own the system-level test definition, drive cross-functional validation efforts, and ensure the end-to-end quality of our Nitro K2 card components deployed across our data centers.

This is a hands-on technical leadership role that requires expertise in embedded systems, hardware/software integration, and test automation at scale. You will work closely with HW, firmware, software, testing and platform teams across us to ensure test coverage, platform integration reliability, and production readiness.

Key job responsibilities:
Define and execute the system-level test and validation strategy for the Nitro K2 card across hardware, firmware, software and platform layers.
Lead the design and development of automated test frameworks to support scalable validation and continuous integration.
Collaborate with hardware, firmware, software, and platform teams to define validation coverage, interfaces, and testability hooks.
Own root cause analysis and debug strategy for complex, cross-subsystem integration issues originating from the production fleet.
Lead and execute hands-on system testing, and participate in the release decision process for production deployment.
Mentor and guide automation engineers, promoting a culture of system-level testing and continuous quality improvement.
Requirements:
BASIC QUALIFICATIONS:
- Bachelors degree in Computer Science, Electrical Engineering, Practical Engineer with strong industry experience.
- 7+ years of experience in system validation, hardware/software integration, or embedded systems testing.
- Strong hands-on experience with Python and Bash (6+ years), including developing automated test solutions.
- Demonstrated experience in test plan definition , design and test automation development.
- Experience in leading or mentoring a team of automation/test engineers.
- Solid understanding of Linux systems, including system-level debugging and scripting.
- Experience in embedded software testing, particularly across HW/SW boundaries.

PREFERRED QUALIFICATIONS:
- Experience working with Linux kernel, device drivers, or low-level platform bring-up.
- Background in PCIe architecture, HW interfaces (e.g. GPIO, I2C, SPI) , storage, networking, and cloud server platforms solutions.
- Familiarity with pytest or other Python-based automation/test frameworks.
- Experience with CI/CD tools and processes (e.g., Jenkins, or similar).
- Exposure to AWS services (e.g., CloudWatch, Lambda, S3, EC2, EBS, ENA) in the context of test automation and infrastructure.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8230194
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Herzliya and Haifa
Job Type: Full Time
Required Firmware Embedded Engineer for the Silicon Validation team
New way of thinking and insights can turn in to extraordinary products very quickly. The success we are striving will be result of highly skilled team working in an environment that nurtures creativity, partnership and novelty in solving tough problems.
As a firmware engineer in the Wireless Connectivity Silicon Team, you will be responsible for the design, development, and bringup of innovative wireless silicon for various products. Bringing your passion and dedication will lead to innovative silicon solutions for our products. Join us! We are looking for a forward-thinking, dedicated, highly competent, experienced firmware engineers to design, develop and bringup fresh silicon for our products - the iPhone, Mac and more! New challenges arise every day that require sharp problem-solving skills of individuals. Are you ready to take on this challenge?
Join us to help deliver the next groundbreaking product! Work with logic designers to understand the operation of the block and system levels. Investigate the use cases, system-level operation, and performance requirements. Develop low-level software to validate functionality, conformance, and performance of the systems.
The position is relevant to our sites: Herzliya and Haifa.
Description
In this highly transparent position you will be working on outstanding our SoC. You will be in charge of SW development for Silicon validation purposes. You will be working on design, development and integration of complex drivers, tests and SW infrastructure, as well as SoC Bring-ups and sophisticated debug activities. Imagine what do you could do here. New insights have a way of becoming extraordinary products, services, and customer experiences very quickly. Bring passion and dedication to your job and there's no telling what you could accomplish. Dynamic, smart people and inspiring, innovative technologies are the norm here. The people who work here have reinvented entire industries with all products. The same real passion for innovation that goes into our products also applies to our practices strengthening our dedication to leave the world better than we found it.
You will be in charge of SW development for Silicon validation purposes.
You will be working on design, development and integration of complex drivers, tests and SW infrastructure, as
well as SoC Bring-ups and complex debug activities.
Requirements:
Minimum Qualifications:
Solid understanding in C
Experience in HW-SW integrations
Programming in RT/Embedded environment
Good debug skills
Preferred Qualifications:
5+ years of experience, programming in RT/Embedded, multi-thread environment
Bachelor's Degree in Electrical Engineering, Computer Engineering, or equivalent.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8237719
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
25/06/2025
Location: Haifa
Job Type: Full Time
We are seeking for System Integration Engineer to help define, shape, and integrate solutions for the next generation of our cloud platforms. As System Integration Engineer youll join Annapurnas product system team, which develops advanced technologies used across our data centers, supporting services like Nitro and Graviton.
You will take ownership of end-to-end system interfaces (e.g., PCIe, Ethernet, DDR) throughout the product lifecycle, from concept to post-deployment debugging.

Key job responsibilities:
1. Setting interface design strategies.
2. Ensuring optimal design implementation.
3. Driving complex system debugs involving hardware, firmware, and software components.
4. Providing leadership to raise quality standards.
Requirements:
BASIC QUALIFICATIONS:
- B.Sc. in Electrical / Computer Engineering or in related field.
- 5+ years of HW Design Experience or in Functional or Electrical Integration/Validation/Debug.
- 3+ years system design experience
- Familiarity with high-speed interfaces and signal integrity concepts
- Basic skills in scripting: Python / Bash etc.

PREFERRED QUALIFICATIONS:
- Familiarity with DDR interface (DDR4/DDR5).
- Computer architecture knowledge.
- High-speed interfaces knowledge and debug capabilities.
- Experience with server (x86 / ARM) design or architecture.
- Experience with operating systems, boot loaders, networking, and remote debugging.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8230335
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
25/06/2025
חברה חסויה
Location: Haifa
Job Type: Full Time
We are seeking for System Integration Engineer to help define, shape, and integrate solutions for the next generation of our cloud platforms. As System Integration Engineer youll join Annapurnas product system team, which develops advanced technologies used across AWS data centers, supporting services like Nitro and Graviton. You will take ownership of end-to-end system interfaces (e.g., PCIe, Ethernet, DDR) throughout the product lifecycle, from concept to post-deployment debugging.

Key job responsibilities:
1. Setting interface design strategies.
2. Ensuring optimal design implementation.
3. Driving complex system debugs involving hardware, firmware, and software components.
4. Providing leadership to raise quality standards.
Requirements:
BASIC QUALIFICATIONS:
- B.Sc. in Electrical / Computer Engineering or in related field.
- 5+ years of HW Design Experience or Electrical Integration/Validation/Debug.
- 3+ years system design experience
- Knowledge in high-speed serial interfaces (Ethernet, PCIe, USB4...) and signal integrity concepts
- Basic skills in scripting: Python / Bash etc.

PREFERRED QUALIFICATIONS:
- Computer architecture knowledge.
- High-speed interfaces knowledge and debug capabilities.
- Experience with server (x86 / ARM) design or architecture.
- Experience with operating systems, boot loaders, networking, and remote debugging.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8230283
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Haifa
Job Type: Full Time
We are looking for a Emulation Engineer to join the Radar VLSI team and drive the development of the next generation ASIC Sensors.
What will your job look like:
This role is all about making high-end Emulation environment base on new designs.
Building and integrating complex components, working with cross-functional engineering teams, and making systems that will change the way we drive.
This role requires an engineer who loves challenges and knows how to bring engineering excellence while considering complicated constraints.
You will work with members of a cross-functional talented,
You will lead the Emulation development for the VLSI team.
You will work closely with SW Engineers, Logic Engineers, Verification Engineers, and others.
You will serve as an expert matter for your domain, which has the full responsibility to drive & implement improvements and new ideas.
Requirements:
BSc in Electrical Engineering, Computer Science, or Computer Engineering.
5+ years of experience in emulation and Hands-on experience with emulation tools ( Palladium/ZeBu/Haps).
3+ of experience Designing logic (Verilog/System Verilog) , Verification (UVM) - an advantage
Hands-on bring-up and debugging of PCBs that have standard digital interfaces (e.g., SPI, I2C, MIPI)- - an advantage
Working with multiple cross-functional teams (e.g. software, Logic, Verification) .
Using standard lab equipment (e.g., multimeters, oscilloscopes, spectrum analyzers).
Team player and excellent communication skills.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8230000
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
05/06/2025
Location: Haifa
Job Type: Full Time
We are looking for an experienced engineer for the Nitro cards product team. Our products include the most advanced interfaces and technologies and widely used across our data centers as backbone for Nitro and other services. The candidate will serve as expert for Nitro HW power domain - ensuring best design, integration and operational health for power domain for our Nitro cards in our data centers.

As a member of a product team you will own complex system debugs involving HW, FW and SW components. You will deal with functional and integration aspects related to complex systems focusing on the power domain related to Nitro HW. You will be involved in architecture decisions, integrations, deployments and debugging related to complex systems while also providing remote and on-site support to our global colleagues.
You will also provide leadership by driving the teams around you to raise the bar and deliver higher quality product on behalf of our customers. This is a fast-paced, intellectually challenging position, and you will work with thought leaders in multiple areas of technology. You will set high standards for yourself and everyone you work with, and will be constantly looking for ways to improve the performance, quality, cost and reliability of products and services you own. We are changing an industry, and we want individuals who are ready for this challenge and want to reach beyond what is possible today.

Key job responsibilities:
- Lead triage, debug and root cause analysis of Nitro HW Power domain related issues in our systems (card / system level).
- Enhancing the ability to trouble shot issues and driving for closure of in-fleet problems.
- Analyze customers` mode of work / requirements and provide resolutions accordingly.
- Co-work with Annapurna Labs monitoring team and other root cause teams to improve quality and reliability of products operation in the fleet.
- Provide Annapurna Labs Board, ASIC and system design, SW and testing development, QA and architecture teams information and requirements from customers fleet operation perspectives and represent the customer voice.
- Drive and maintain trainings, quality documentation and collateral in order to improve in-fleet operation.
- Design and define various tools and scripts to provide support to projects and customize it as per requirement.
- Willing to travel per need few times a year.
Requirements:
BASIC QUALIFICATIONS:
- B.Sc. in one of the following: Electrical / Computer Engineering, or a related field.
- 7+ years of experience in designing boards / systems involving power circuitry.
- High level of expertise in power circuitry design and integration.
- Basic skills in scripting: Python / Bash etc.
- Experience in driving cross team and cross disciplinary activities.

PREFERRED QUALIFICATIONS:
- 10+ years Design and Debug / Integration Experience in systems involving HW, FW and SW.
- Advanced programming skills.
- Computer architecture knowledge (design or architecture) for x86 / ARM.
- Experience with operating systems, boot loaders, networking, and remote debugging.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8205950
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Haifa
Job Type: Full Time
Our Automated Driving group in Haifa is looking for an experienced SoC Design Engineer for DFT team.
This is an exciting opportunity to join a team of highly talented engineers, working on one of the most cutting edge technologies - Autonomous Vehicle (AV) SoC.
At our Automated Driving group, we know that the idea of a fully autonomous car is no longer science fiction, but a reality that we are creating!
We have spent more than 15 years developing the world's most Advanced Driver Assistance Systems (ADAS) and we are now leading the computer vision and machine learning domain, reaching fully automated driving experience (AV).
What will your job look like:
You'll be responsible of architecture of the DFT solutions across the SOC (MBIST, SCAN, ATPG, LBIST and more)
Develop all the necessary HW / FW / SW for the different modules
Verify and Validate our design
Debug and analyze coverage and yield loss
As a cutting edge technology company, we are working only with the very advanced DFT tools and features, while developing our own methods and DFT concepts as it required by the Automotive and Safety related products market (ISO26262).
Requirements:
BSc/MSc in Electrical/Computer engineering
Proven Experience in either SCAN or MBIST tools and flows
At least 5 years of experience in the ASIC/SoC industry
Proven skills in Perl / Python / TCL
Knowledge of Hierarchical SCAN methodology
Knowledge of Logic BIST (LBIST) and Test Point Insertion (TPI) flows
Knowledge of TAP protocols IEEE 1149.1/1500/1687 (iJTAG)
Knowledge in Automotive industry FuSa (Functional Safety)
Knowledge of Synthesis flows
DFT experience in both SCAN/MBIST - Advantage.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8230049
סגור
שירות זה פתוח ללקוחות VIP בלבד