דרושים » חומרה » HW Analog Design Engineer

משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP
כל החברות >
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
7 ימים
חברה חסויה
Location: Tel Aviv-Yafo
Job Type: Full Time
We are looking for a seasoned Electronics Engineer with over 5 years of hands-on experience in analog circuit design and power supply engineering. In this role, you will focus on developing and refining analog circuitssuch as amplifiers, filters, and DACs operating from DC to 2GHzand power supply solutions across various topologies. As the go-to person in electronics, youll work as a key contributor and technical expert, collaborating closely with our hardware teams in Denmark and Israel, as well as operations during the NPI phase.
Key Responsibilities
Analog Circuit Development:
Design and optimize analog circuitry, including op-amps, filters, and signal generation modules (DACs) covering frequencies from DC up to 2GHz and above.
Power Supply Engineering:
Develop robust power supply designs across various schemes (buck/boost converters, LDOs, switching regulators, etc.) that meet high-performance standards.
Lab and debug experience:
Experience in working in labs, measuring and debugging electronics.
Simulation & Design:
Utilize Altium for PCB design and LTspice for circuit simulation to validate and refine your designs.
Design for Manufacturing & Test (DFM/DFT):
Incorporate DFM and DFT best practices to ensure reliability, manufacturability, and scalability across many channels in compact form factors.
Performance & Compliance:
Ensure designs meet stringent low-noise requirements and EMI/EMC compliance for high-performance applications.
Cross-Functional Collaboration:
Work closely with hardware teams in both Denmark and Israel, and engage with operations during the NPI process to ensure seamless integration of your designs.
Technical Expertise:
Act as the electronics subject matter expert within the team, providing technical sparring and review to peers.
Requirements:
Experience: 5+ years in analog circuit and power electronics design.
Technical Proficiency:
Extensive experience in designing amplifiers, filters, signal generation circuits, and DACs for high-frequency applications (DC-2GHz).
Proven track record in developing complex power supply systems (e.g., buck/boost converters, LDOs, switching regulators).
Tools:
Proficient in Altium and LTspice.
DFM/DFT Knowledge:
Deep understanding of design for manufacturability and testability to support robust, scalable production.
Industry Exposure:
Experience with telecom, radar, aerospace, or similar high-performance sectors is a plus.
Education:
B.Sc. or higher degree in Electrical Engineering or a related field.
Personal Attributes:
Technical Authority: Recognized as the go-to person for electronics, with the ability to mentor and collaborate with peers.
Detail-Oriented: Meticulous approach to ensuring low-noise designs and EMI/EMC compliance while scaling to many channels in a small form factor.
Collaborative: Strong communication skills and a proven ability to work effectively with global teams, including remote coordination and occasional travel.
Innovative & Proactive: Eager to push boundaries and refine designs in fast-paced, high-performance environments.
This position is open to all candidates.
 
Hide
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8288784
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות דומות שיכולות לעניין אותך
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
4 ימים
חברה חסויה
Job Type: Full Time and Hybrid work
Were now expanding our Electronics team and looking for a Senior Hardware Engineer to take a key role in designing the electrical systems that drive and control the robot physical intelligence.
Responsibilities
Design and develop complex custom PCBs for robotic systems including: Motor drivers, Power units and power management units
Sensor interfaces and digital communication systems Lead hands-on hardware bring-up, debugging, and validation processes in the lab.
Interface directly with Embedded software, mechanical, AI, and control teams to ensure Full-Stack integration and high system performance.
Define board-level TEST plans and validation procedures.
Develop and support EtherCAT, FDCAN, CANBus, and other Real-Time communication interfaces across the system.
Drive component selection, schematic design, layout reviews, BOM management, and production documentation.
Requirements:
B.Sc. in Electrical/Electronics Engineering (or equivalent proven experience).
7+ years of experience in hardware design for multidisciplinary robotic systems, mechanics, automation, Embedded systems and robotic motors.
Proven track record designing and developing discrete motor control and actuation drivers, High current power DCDC inverters and power distribution circuits.
Proven hands-on experience with industrial communication standard interfaces such as EtherCAT, FDCAN,CANBus, RS485, SPI, I2C and USB.
Proven experience in developing analog and digital circuit design.
Proven experience in schematic Board Layout design with Altium Designer (OrCAD acceptable if willing to work in Altium).
Experience with lab bring-up, validation, and debugging using oscilloscopes, logic analyzers,multimeter,current probes and other TEST equipment.
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8294198
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
ווין ג'ובס
דרושים בווין ג'ובס
סוג משרה: משרה מלאה
לחברת הנדסה מובילהדרוש/ה מהנדס/ת מערכת, להובלת פרויקט משלב האפיון והגדרת דרישות דרך כתיבת מסמכי תכן לצוותי ההנדסה השונים ואל מול קבלני משנה ועד אינטגרציה מערכתית ומסירת מערכת ללקוח, נדרשת ניסיון בתחום הנדסת מערכת, עם דגש על מערכות מורכבות ורב-תחומיות, ניסיון בפיתוח ואינטגרציה של מערכות מולטי דיספלינריות, ניסיון בכתיבת מפרטי מערכת, תוכנית אינטגרציה ותוכניות עבודה בכל שלבי הפיתוח והעברה לייצור, ניסיון בתמיכה ליווי ופיקוח על קבלני משנה, אנגלית ברמה גבוהה, כתיבה טכנית ברמה גבוהה.
דרישות:
המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8280735
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 11 שעות
STG INTERNATIONAL
סוג משרה: משרה מלאה
חברת אס.טי.גי אלקטרוניקס מתפתחת ומחפשת הנדסאי/ת מהנדס/ת מכירות טכני לתחום רכיבי האלקטרוניקה בישראל.
נידרש שילוב של כישורים טכניים, מסחריים,יחסים בינאישיים מעולים ויכולת עבודה בצוות.
 
התפקיד כולל תמיכה בשוק ההייטק הישראלי ללקוחות אזרחיים וביטחוניים.
תנאים טובים למועמד/ת המתאים/ה.
דרישות:
-תעודת הנדסאי / מהנדס אלקטרוניקה 
* המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8289414
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
 
משרה בלעדית
3 ימים
Experis Software
דרושים בExperis Software
מיקום המשרה: תל אביב יפו
סוג משרה: משרה מלאה ועבודה היברידית
דרוש/ה מהנדס/ת אימות קושחה (Firmware Verification engineer )
לתפקיד מרתק בחברה גלובלית מובילה בתל אביב, העוסקת בפיתוח חיישני תמונה חדשניים למצלמות של סמארטפונים מהשורה הראשונה.

מה בתפקיד?
ביצוע ולידציה מעמיקה לקושחה ולמערכות משולבות חומרה - תוכנה
פיתוח והרצה של תכניות בדיקה ואוטומציה ב- Python
עבודה צמודה עם מהנדסי FW ואלגוריתמים לזיהוי ופתרון באגים
פיתוח תשתיות בדיקה על גבי סימולטורים/אימולטורים (Palladium, FPGA)
דרישות:
לפחות 2 שנות ניסיון בתחום הוריפיקציה/בדיקות לקושחה או מערכות Embedded.
ניסיון בפיתוח אוטומציה ב- Python
תואר ראשון בהנדסת חשמל/ מדמ"ח /תחום רלוונטי
ידע ב- C חובה
יכולת למידה מהירה ומוטיבציה גבוהה המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8241474
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
7 ימים
Location: Tel Aviv-Yafo
Job Type: Full Time
Were looking for a Hardware Practical/Qualification Engineer to join our Hardware R&D team in Tel Aviv. In this role, you'll ensure our hardware systems perform reliably under real-world conditions. Youll work closely with our system, software, and validation teams to design and execute comprehensive qualification test plans and legal qualification requirements. Your insights will directly impact the quality, robustness, and performance of cutting-edge quantum control systems.
Key Responsibilities:
Define and implement system-level hardware qualification procedures based on in-depth analysis of circuit and system designs.
Design and build complex test setups, integrating our hardware with advanced measurement tools.
Run and analyze qualification testsstress, thermal, performance, and edge cases.
Review test data to identify anomalies and assess hardware readiness.
Collaborate with engineering teams to communicate findings and support root-cause investigations.
Maintain clear, detailed documentation of test methods, configurations, and results.
Work with vendor laboratories to certify our systems to CE, FCC and other international requirements.
Requirements:
Practical Engineering degree in Electronics or B.Sc. in Electrical Engineering (or equivalent).
Solid understanding of electronic systems and hardware fundamentals, including RF and analogue knowledge.
Ability to read and interpret schematics and technical datasheets and work on a board level.
Hands-on experience operating lab equipment (oscilloscopes, signal generators, power supplies, etc.).
Comfort with Linux environments and scripting for test automation or data collection.
Experience working in certification laboratories for EMC/EMI.
Its an advantage if you have knowledge in:
System-level debugging and fault isolation skills.
Ability to work independently on complex hardware investigations.
Strong communication skills with a knack for clear technical documentation.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8288780
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
13/07/2025
Location: Tel Aviv-Yafo
Job Type: Full Time
We are looking for a highly experienced and motivated Engineering Product Leader to join our Operations Engineering Team.
This role combines deep expertise in electrical and component engineering with strong product leadership and configuration management responsibilities.
This is a multidisciplinary and hands-on role, responsible for supporting the transition of new products from development into production (NPI), managing electrical components and designs, and maintaining configuration integrity through the PLM system, close collaboration with R&D, Procurement, QA, and Production teams, as well as with EMS/ODM suppliers and external manufacturing partners.
The role includes full responsibility for the administration and configuration management of the PLM system (Teamcenter), ensuring accurate product data management, BOM control, revision and change management, and supporting the Operations team as the PLM system administrator.
What youll do:
Engineering Product Leader / Electrical Engineer
Take full ownership of product engineering responsibilities starting from the NPI phase through production ramp-up and lifecycle support (subcontractors and EMS/ODM manufacturing partners)
Collaborate and interface closely with R&D engineers during early development stages to ensure manufacturability and technical alignment.
Manage all engineering activities related to product introduction, engineering changes, and production support, without direct development responsibility.
Review and update electrical schematics and drawings, provide technical input for troubleshooting and improvements.
Collaborate with R&D on design-for-manufacturing and testing (DFx) considerations.
Component Engineering (Primary Focus):
Responsible for all aspects of electrical component engineering across the company.
Define, select, qualify, and approve electronic/electrical components for new and existing products.
Manage component library and BOM structures in the PLM system (Teamcenter).
Evaluate EOL (End of Life), lead-time risks, and propose alternates or cost-saving solutions.
Requirements:
B.Sc. in Electrical Engineering mandatory.
4/5+ years of experience in electrical/component engineering or manufacturing engineering roles within high-tech, automation, or machinery companies required.
Proven experience in component engineering selection, qualification, lifecycle management, and supplier interface.
Strong hands-on experience in electrical design and manufacturing support.
Experience leading NPI processes from development through production ramp-up.
Solid understanding of DFx principles manufacturing, quality, and test design (ATE).
Experience with PLM systems (Teamcenter strongly preferred) including document control and BOM management.
Familiarity with ERP systems advantage for Priority.
Experience working with EMS, ODM, and JDM partners including full-turn-key models.
Excellent project planning, time management, and multitasking capabilities.
Strong attention to detail, highly organized, and able to work under pressure.
Team player with excellent interpersonal and communication skills.
High-level English verbal and written.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8255488
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
In this role, you will be responsible for ensuring that the Systems-on-Chip (SoCs) meet the power, thermal, and performance goals. You will play a critical role in the pre and post-silicon validation phases, collaborating with cross-functional teams to identify, debug, and optimize SoC behavior in use cases, as well as validating the IPs protection mechanism.

Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of Google platforms, we make Google's product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.

Responsibilities
Contribute to developing and improving post-silicon test content that exercises both IP and SoC levels workloads and other compute-intensive scenarios.
Collaborate with architecture, design, and firmware teams to define comprehensive validation plans for SoC features, focusing on power consumption, thermal management, sensors behavior, and performance metrics.
Work with design and firmware teams to propose and implement solutions for optimizing SoC power efficiency and performance, including tuning core-to-memory latencies and bandwidth, power control loops, thermal control loops, etc.
Develop and maintain automated test scripts and frameworks (e.g., Python) to improve validation efficiency and coverage.
Participate in early silicon bring-up and platform bring-up activities, ensuring the stability and functionality of high-power multi-core SoCs.
Requirements:
Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, a related field, or equivalent practical experience.
5 years of experience in post-silicon validation, with power and performance characterization.
Experience validating multi-core CPU/GPU/APU architectures.
Experience in programming languages such as C, C++, and Python for scripting and automation.
Experience with lab equipment such as oscilloscopes, logic analyzers, power meters, and thermal chambers.
Experience with SoC architecture, including interconnects, memory hierarchy, cache coherency, and power management concepts.

Preferred qualifications:
Experience with embedded systems programming (e.g., bare-metal, RTOS, kernel, driver programming).
Experience with version control systems (e.g., Git).
Excellent debugging and root-causing skills for hardware/software issues.
Excellent analytical, problem-solving, and communication skills.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8255672
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
In this role, you will help to develop and maintain emulation infrastructure, tools, and workflow methodologies supporting our Application-specific integrated circuit (ASIC) projects. You will provide emulation infrastructure and methodologies for supporting these projects. You will work with other emulation team members as well as designers, verification engineers, and software teams. You will work with with our external vendors, lab support teams, networking and security, and Electronic Design Automation (EDA) tooling and methodology teams to deliver emulation based prototyping capabilities for our ASIC projects. You will also assist in compiling projects specifying our prototyping platforms, debugging issues in both infrastructure and design, assisting in the hardware and lab bring up, and verification of our ASIC systems.

Responsibilities
Help in maintaining and upgrading emulation infrastructure and act as a primary interface to emulation vendors.
Explore emulation methodologies, gather feedback from the team, and implement emulation workflows and methodologies.
Create tooling and automation to support emulation Electronic Design Automation (EDA) tools, licensing, and job management in Google infrastructure.
Support emulation team members with debugging hardware, tooling, and project specific issues.
Help to bring up external interfaces (e.g., USB, PCIe, Ethernet, etc.) on the emulation platforms, and create standalone test cases for tool issues encountered in the emulation compile and runtime flows.
Requirements:
Bachelor's degree in Computer Science, Electrical Engineering, or equivalent practical experience.
Experience with associated Electronic Design Automation (EDA) tools, with automation and flow enhancements.
Experience using command debug tools (e.g., Verdi, SimVision/Indago, GDB) and programming in C, C++, Perl, TCL, or Python.
Experience with emulation systems, maintenance, upgrades, and methodology enhancements.

Preferred qualifications:
Master's degree in Computer Science, Electrical Engineering, or a related technical field.
Experience deploying Electronic Design Automation (EDA) tools into distributed environments.
Experience with system administration, networking, and security systems.
Experience with Register-Transfer Level (RTL) design, Verilog, simulation, System Verilog, and assertions.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8257488
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
חברה חסויה
Location: Tel Aviv-Yafo
Job Type: Full Time
We are looking for a Hardware System Engineer to join our growing team!
This is a great opportunity to be part of the fastest-growing infrastructure company in history. We are revolutionizing data storage solutions with its Universal Storage platform, designed to simplify AI and enterprise infrastructure.
In this role, you will be responsible for qualifying hardware components such as servers, JBOFs, SSDs, network cards, switches, and optical transceivers. You will write requirement documents for new features, work with vendors on implementation and debugging, and transfer knowledge to internal teams, including software developers, QA, support, and manufacturing. Additionally, you will become the subject matter expert for specific hardware platforms and technologies. Join us and contribute to shaping the future of data management while being part of a fast-growing, innovative company.
Requirements:
Required Skills:
Demonstrate a detailed system-level understanding of systems
Previous experience in hardware design, firmware design, linux device drivers and/or QA/verification of complex systems.
B.a. / B.Sc EE or CS - an advantage
Prior experience in at least one of the following technical areas:
PCIe: Link training, configuration space, configuration procedures by the OS, hot-plug, transport layer, PCIe switch, SR-IOV, experience with PCIe Gen.4+ an advantage.
Server design: x86 CPUs, BMC, IPMI, Redfish, SMBus/I2C, BIOS, UEFI, design for high availability, thermal design.
Storage systems: NVMe SSDs, NVMeoF, RAID, OCP SSDs
Networking: 100/200/400/800G Ethernet, Infiniband, RDMA, NVMeoF, QoS, Flow Control, VxLANs, Optical Tranceivers, cables and DPUs
Linux: Device drivers, memory management, hardware debug and test tools.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8257454
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
we are looking for a Hardware Emulation Engineer, Google Cloud
Responsibilities
Help to maintain and upgrade emulation infrastructure and act as a primary interface to emulation vendors.
Explore emulation methodologies, gather feedback from the team, and implement emulation workflows and methodologies.
Create tooling and automation to support emulation Electronic Design Automation (EDA) tools, licensing, and job management in infrastructure.
Support emulation team members in debugging hardware, tooling, and project specific issues.
Help bring up external interfaces (e.g., USB, Peripheral Component Interconnect Express (PCIe), Ethernet, etc.) on the emulation platforms, and create test cases for tool issues encountered in the emulation compile and runtime flows.
Requirements:
Bachelor's degree in Electrical Engineering or equivalent practical experience.
3 years of experience with emulation systems including maintenance, upgrades, methodology enhancements and Electronic Design Automation (EDA) tools (e.g., Palladium or Zebu).
Experience with coding in Perl, TCL or Python.

Preferred qualifications:
Master's degree in Electrical Engineering.
Experience in deploying EDA tools into distributed environments.
Experience with system administration, networking, and security systems.
Experience with Register-Transfer Level (RTL) design, Verilog, simulation (e.g., VCS, Incisive, Questa), System Verilog (e.g., DPI and transactors), and assertions.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8255795
סגור
שירות זה פתוח ללקוחות VIP בלבד