דרושים » הנדסה » FPGA Engineer for Emulation Team

we are looking for a Emulation Engineer to join the Radar VLSI team and drive the development of the next generation ASIC Sensors.
What will your job look like:
This role is all about making high-end Emulation environment base on new designs.
Building and integrating complex components, working with cross-functional engineering teams, and making systems that will change the way we drive.
This role requires an engineer who loves challenges and knows how to bring engineering excellence while considering complicated constraints.
You will work with members of a cross-functional talented,
You will lead the Emulation development for the VLSI team.
You will work closely with SW Engineers, Logic Engineers, Verification Engineers, and others.
You will serve as an expert matter for your domain, which has the full responsibility to drive & implement improvements and new ideas.

Which department will you join?
The SOC verification group owns the important and challenging job of verifying our company's chip. It is involved from product specification to final SOC delivery, and involves all the system components. The group is made up of few of the best verification engineers, so besides contributing to making our roads safer, youll get the chance to work at one of the most professional verification teams.
What will your job look like:
You'll be responsible for Pre-Silicon system-level verification of the most cutting-edge AI accelerators and technologies in the automotive field.
Define the TestPlan, develop and run tests on simulation/emulation environments, develop test environment and verification collaterals.
You'll have a broad effect on our unique product from the very beginning of the process.

Which department will you join?
our companys Unit Level Verification Team in Haifa is looking for an experienced verification engineer to be involved in the development of
our companys future AI and deep learning HW accelerators.
This is an exciting opportunity to join a team of highly talented engineers, working on the most cutting-edge technologies to deliver
our companys EyeQ future chips, aimed to power the worlds first fully Autonomous Vehicle!
What will your job look like?
Define, implement and enhance verification environments using UVM methodology.
Write and debug tests that combine UVM methodology and SW code.
Identify and write various types of coverage measures.
Collaborate with designers, architects, and SW developers from Haifa and Jerusalem teams to deliver the most comprehensive verification environment.
Integrate Industry Standard (such as AXI and OCP) and other 3rd party VIPs.

we are looking for an Embedded SW Engineer for SystemC Modeling that include Performance and Program view Modeling. You will be part of VLSI emulation team , working on current and next-generation designs for next generation sensors.
The SystemC models are fundamental parts of the VLSI chip infrastructure, they are used during HW architecture definition phase and by SW developers for system shift left.
What will your job look like:
You will work on Critical performance analysis and optimizations on the ASIC micro architecture as multi-NOC , DDR and CPU .
You will work on developing SystemC models that describe the RTL models on High level language and enable true system . level shift left for the embedded SW team.
You will have the opportunity to work on state-of-the-art simulation and profiling tools and adopt them to our company's needs.
You will work closely with HW architects and SW/Algorithms developers.

The company's EyeC VLSI team designs chips for RADAR systems used in ADAS and autonomous vehicles. Our Physical Design team operates in a startup-like environment, emphasizing technical expertise, execution, and ownership. Each engineer in the Physical Design team takes full responsibility for their work, from initial definition through execution and final sign-offs. Engineers collaborate closely with design and architecture teams to develop constraints, conduct design reviews, and implement RTL modifications to ensure convergence.
We are seeking an Experienced Backend to join our growing Physical Design team. In this role, you will play a key part in the design of state-of-the-art SoCs, from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS.
Floorplan exploration with guidance and collaboration with front-end and architecture teams.
STA: work with FE and floor planner to manage block and top level constraints and 1st level of timing analysis.
Synthesis exploration and final synthesis netlist: Scan insertion @ synthesis, clean checks from Lint, UPF & Spyglass.
Place & Route: from Synthesis netlist to final layout and signoff verification with target to achieve best power performance and area.
Signoff : on all physical design domains- STA, IR/EM, Physical Verification, Logic Equivalent Checking, Low Power Verification.

our company EyeC VLSI team - a group designing the chips for RADAR systems for ADAS and autonomous cars.
Our Physical Design group is working in a Startup like environment with respect to technical expertise, execution & responsibility . Each Physical Design engineer has an end to end responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges
Were looking for a Physical Design STA Technical Expert to join the growing Physical Design Team, responsible for state of the art SoC design from definition to Tape-Out.
What will your job look like:
Leading FC timing activities & methodologies for brand New SoC, from definition to TO.
Writing design constraints (SDC) for FC/IP/Block levels for all modes.
Involved in chip architecture definition for functional & DFT domains.
Working in close collaboration with the front-end & architecture team.
Working with engineers to identify and overcome roadblocks and obstacles.
Defining AC timing from spec to implementation.
Supporting complex clock structures.

our company's EyeQ Platform Group (EPG) is seeking a motivated Formal Verification Engineer to join our team and contribute to development of hardware verification environments.
This position offers an opportunity to apply formal methods to verify the correctness of various complex digital systems.
This is an exciting opportunity to join a team of talented engineers, working cutting edge technologies in the field of autonomous vehicle.
What will your job look like:
Be the owner of formal verification environment from first draft to sign-off stage
Apply formal methods to verify the correctness of various complex digital systems
Work with HW architects\designers to define assumptions, rules and cover properties
Help define the formal verification methodology and environment to be applied by the team
Explore new Formal methods and Tools
Work with tools like Cadence JasperGold, Verisium manager, Xcelium, Indago
Analyze verification results, identify bugs, and collaborate with engineers to resolve design issues
Develop generic formal blocks\functions of commonly used logic, to be later used off the shelf.

Develop and execute comprehensive validation plans for Google's custom silicon, covering functional, performance, power, and reliability aspects.
Design and build scalable validation test infrastructure, including hardware setups, software frameworks, and automation tools on Emulation and/or FPGA platforms.
Lead the debugging and resolution of complex silicon issues, collaborating with cross-functional teams such as design, architecture, software, and firmware.
Analyze validation data to identify trends, root causes, and opportunities for improvement in silicon quality and reliability.
Build and mentor a high-performing team of silicon validation engineers, fostering a culture of collaboration, innovation, and technical excellence.

our company EyeC VLSI team - a group designing the chips for RADAR systems for ADAS and autonomous cars.
Our Physical Design group is working in a Startup like environment with respect to technical expertise, execution & responsibility . Each Physical Design engineer has an end to end responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges
Were looking for a Physical Design Expert to join the growing Physical Design Team, responsible for developing our next generation Imagining Radar SoC from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS with horizontal ownership.
Floorplan exploration and collaboration with front-end and architecture teams.
Synthesis exploration and final synthesis including: SDC definition, Scan insertion, Lint, LEC, UPF-LP & Spyglass verification.
Place & Route: from Synthesis to final layout and signoff verification on all tools and floors, with target to achieve best PPA.
STA: timing analysis, working with Sub System and Full Chip owners to manage block and top level constraints for synthesis, P&R and signoff.
Signoff : on all physical design domains- STA, IR/EM, Physical Verification, Logic Equivalent Checking, Low Power Verification.

our company's Automated Driving group in Haifa is looking for an experienced SoC Design Engineer for DFT team.
This is an exciting opportunity to join a team of highly talented engineers, working on one of the most cutting edge technologies - Autonomous Vehicle (AV) SoC.
At our company's Automated Driving group, we know that the idea of a fully autonomous car is no longer science fiction, but a reality that we are creating!
We have spent more than 15 years developing the world's most Advanced Driver Assistance Systems (ADAS) and we are now leading the computer vision and machine learning domain, reaching fully automated driving experience (AV).
What will your job look like:
You'll be responsible of architecture of the DFT solutions across the SOC (MBIST, SCAN, ATPG, LBIST and more)
Develop all the necessary HW / FW / SW for the different modules
Verify and Validate our design
Debug and analyze coverage and yield loss
As a cutting edge technology company, we are working only with the very advanced DFT tools and features, while developing our own methods and DFT concepts as it required by the Automotive and Safety related products market (ISO26262).