לוח משרות דרושים, לחיפוש זה נמצאו 34,231 משרות

Required Electric Propulsion Engineer
Why this role exists:
We exist to make urban flight quiet enough that cities say yes. In electric aircraft, once aerodynamic sources are suppressed, the drivetrain can become what remains: torque ripple, radial force harmonics, and inverter switching rise toward the dominant tones an observer on the ground hears. This role owns the electric propulsion system as an acoustic source - you will design motors and drives where electromagnetic noise is a first-order requirement, traded with the same rigor as power density, efficiency, and mass.
What you'll own:
Design and analyze motor electromagnetics with torque ripple, cogging torque, and radial force harmonics treated as hard requirements alongside efficiency and power density.
Develop inverter modulation and current-control strategies - including harmonic injection and active ripple compensation - that suppress electromagnetic excitation before it becomes radiated tone.
Build and validate multiphysics models chaining electromagnetic force prediction through structural transfer paths to radiated noise, correlated against dyno and vehicle data.
Plan and execute dyno test campaigns with synchronized electrical, vibration, and acoustic instrumentation, owning the data pipeline from raw capture to engineering verdict.
Integrate motors, inverters, and mounts into the vehicle's novel lift and propulsion architecture, working structure-borne transmission paths jointly with the Structures and Acoustics teams.
Characterize thermal behavior on the dyno and derive continuous and peak torque envelopes that hold across the full flight profile.
Define acceptance and qualification test procedures for propulsion units, including back-EMF, efficiency-map, vibration, and acoustic signature checks.
Lead propulsion design reviews and hardware failure investigations, driving root cause to closure with documented corrective actions.

Were searching for a Senior Product Analyst to join our elite team and take our data game to the next level. In the past year alone, weve conducted over 200 A/B tests, and were just getting started. If youre a data wizard who thrives on uncovering insights and driving product strategy, this is the role for you.
Want to hear more - check the song at the bottom of this page!
Responsibilities:
Own the end-to-end analytics process, from data collection to insight generation.
Identify trends, opportunities, and actionable insights to fuel our explosive product growth.
Create stunning data visualizations and reports that inspire cross-functional teams to make data-informed decisions.
Lead high-impact testing initiatives to validate hypotheses and shape product development.
Manage and optimize our robust data pipeline to ensure scalability as we continue to skyrocket.

Required Aerodynamics Engineer
Why this role exists:
Aerodynamics and acoustics are not separate disciplines - every flow decision is a noise decision. We are building an aircraft whose acoustic signature is roughly 4 lower than conventional eVTOLs, and that margin is won or lost in the details of unsteady flow around our novel lift and propulsion architecture. This role exists because we need an aerodynamicist who treats sound as a first-order design constraint, not a downstream check, and who can carry a configuration trade from CFD through the wind tunnel to flight data.
What you'll own:
Own aerodynamic design and analysis of vehicle-level configurations, trading lift-system efficiency directly against acoustic source strength across all phases of flight.
Build and run high-fidelity CFD campaigns - steady RANS for performance maps, unsteady and scale-resolving simulations where acoustic source prediction demands it - with documented mesh and turbulence-model sensitivity studies.
Couple aerodynamic predictions to acoustic propagation models, working with the Acoustics team to trace far-field noise back to specific unsteady flow mechanisms on the vehicle.
Plan and execute wind tunnel test campaigns end to end: model definition, instrumentation plans, test matrices, on-site execution, and post-test correlation against CFD predictions.
Develop and maintain the vehicle aerodynamic database - polars, control derivatives, and interactional effects - feeding flight dynamics, performance, and loads analyses.
Correlate predictions against flight test data, drive down model uncertainty, and publish updated aero models with quantified validation status.
Present design trades and analysis results at internal design reviews, defending recommendations with data when performance and noise pull in opposite directions.
Define aerodynamic requirements and acceptance criteria for vehicle hardware, and review geometry releases for compliance with the validated aero lines.

Required Senior Flight Control Engineer
Why this role exists:
Most flight control teams optimize for handling qualities and margins, then hand the result to acousticians and hope. The causality runs the other way: how the vehicle moves - its transients, its trajectories through a city - is a dominant term in its acoustic signature. This role exists to put a senior control engineer at the point where those decisions are made, owning control laws in which noise is a hard design constraint alongside stability and performance, not a downstream measurement.
What you'll own:
Design, implement, and tune the vehicle's core control laws in MATLAB/Simulink, with acoustic-source models embedded directly in the design loop.
Develop control strategies that treat radiated noise as a hard constraint alongside stability margins and handling qualities, through every phase of flight.
Build and maintain the nonlinear 6-DOF simulation environment used for control design, Monte Carlo robustness analysis, and pre-flight rehearsal of every test point.
Define attitude, rate, and trajectory constraints for noise-critical flight phases - departure, approach, and low-altitude operations over populated areas - jointly with the Acoustics team.
Autocode flight-critical control software to the real-time flight computer and verify it through processor-in-the-loop and hardware-in-the-loop campaigns.
Plan and execute flight test campaigns: write test cards, monitor telemetry in real time, and lead post-flight reconciliation of data against model predictions.
Run system identification programs that anchor aerodynamic, actuator, and noise-source models in flight data, feeding corrections back into the next control law release.
Lead control law design reviews with documented stability margins, robustness analyses, and failure-mode behavior, building the evidence base certification authorities will eventually audit.

Were searching for a Senior Product Analyst to join our elite team and take our data game to the next level. In the past year alone, weve conducted over 200 A/B tests, and were just getting started. If youre a data wizard who thrives on uncovering insights and driving product strategy, this is the role for you.
Want to hear more - check the song at the bottom of this page!
Responsibilities:
Own the end-to-end analytics process, from data collection to insight generation.
Identify trends, opportunities, and actionable insights to fuel our explosive product growth.
Create stunning data visualizations and reports that inspire cross-functional teams to make data-informed decisions.
Lead high-impact testing initiatives to validate hypotheses and shape product development.
Manage and optimize our robust data pipeline to ensure scalability as we continue to skyrocket.

Were looking for a Tech Lead to be the company-wide focal point for AI utilization, infrastructure, and security - across both our core compliance platform and the Agentic Suite. This is a hands-on technical authority role, not a management track: you'll lead a small team (2-5 engineers) while spending most of your time driving how the company builds with AI, not on people management. You'll report to the Agentic BU owner.

Responsibilities
Own the company's AI infrastructure - model access, tooling, evaluation, cost/performance tradeoffs - across all engineering teams.
Drive AI-native R&D transformation: bring agentic development practices into day-to-day engineering workflows, not just the product.
Own AI-related security posture: data handling, model/tool access control, secure use of third-party AI services.
Be the go-to technical authority other teams pull in when adopting AI tooling or agentic patterns.
Lead a small team (2-5 engineers) building and maintaining shared AI infra and tooling.
Identify workflow inefficiencies across R&D and drive the infra/tooling changes that fix them.

Required Acoustics Research Engineer
Why this role exists
Noise - not range, not cost - is what keeps aircraft out of cities. We exist because we believe an acoustic signature roughly four times lower than conventional eVTOLs changes what urban aviation is allowed to be, and this role sits at the exact center of that bet. You will own the methods that tell us, with numbers we can defend, how quiet the vehicle actually is - and where the next decibel comes from.
What you'll own:
Develop and validate source-noise prediction models for our novel lift and propulsion architecture, from first-principles aeroacoustics through empirically anchored corrections.
Design and execute acoustic measurement campaigns in anechoic facilities and at outdoor ranges, owning microphone array design, calibration chains, and data acquisition end to end.
Reduce rig and flight-test acoustic data into validated spectra, directivity maps, and component-level source rankings that directly drive vehicle design decisions.
Quantify community-noise exposure using EPNL, SEL, dBA, and tonality-corrected metrics, and translate the results into hard, testable requirements for design teams.
Build psychoacoustic models - loudness, sharpness, tonality, fluctuation strength - and run jury listening studies that connect physical metrics to human annoyance.
Run aeroacoustic simulations coupling CFD to acoustic analogy solvers (FW-H or equivalent), and reconcile predictions against measured data every design cycle.
Define and defend the vehicle noise budget at design reviews, allocating margins across subsystems and flagging acoustic risk before hardware is built.
Author measurement procedures, test reports, and model validation documents rigorous enough to anchor future certification arguments.

Were looking for an experienced Head of Marketing with a strong B2B product background and a proven track record of building a products brand identity, positioning, and market presence from the ground up.
This is a highly hands-on role. It brings together brand management and product marketing: building a distinct, consistent brand while defining how the product is positioned, how its value is communicated, and how it is brought to market. You will combine strategic leadership with direct involvement in day-to-day execution, taking ownership of both the direction and the work needed to bring it to life.
You will own how the product looks, sounds, and is understood, both internally and in the market. Your scope will include brand strategy, positioning, messaging, website, inbound marketing, and sales enablement.
Working directly with senior leadership and closely with product and sales, youll turn complex product capabilities into clear, compelling stories and create the content and materials needed to bring them to customers.
Youll also lead external agencies, designers, writers, and freelancers, setting clear briefs and holding the work to a high standard, while remaining hands-on in the day-to-day execution.
What Will You Do?
Hands-on leadership. Lead marketing strategy while remaining deeply involved in execution, driving the work forward from planning through delivery. Set the marketing roadmap, define priorities, and decide where to focus resources. Balance building the brand with generating demand and supporting sales.
Positioning. Define where Draper sits in the AI marketing category and why buyers should choose us. Clarify our ideal customers, their needs, and our differentiation. Partner with product and sales on pricing and packaging.
Brand. Build and evolve the Draper identity, from the initial agency brief and creative direction to the style guide, visual language, templates, and tone of voice. Ensure consistency across decks, website, product UI, and social. Lead agency and creative partners from brief through delivery.
Messaging. Build the messaging architecture, including narrative, proof points, objection handling, and audience-specific messaging. Translate technical capabilities into clear customer benefits and business value. Align sales, product, and senior leadership. Write key copy, from homepage messaging to launches and thought leadership.
Go-to-market and sales enablement. Lead marketing planning for the product launch and subsequent releases. Develop pitch decks, product overviews, case studies, and other materials that help sales explain the products value and move conversations forward.
Inbound and demand. Build and improve the journey from first touch to qualified conversation through content, SEO, lifecycle email, lead capture, and conversion. Work with sales to assess lead quality and identify what turns interest into customers.
Digital presence. Own the website end to end, including content, structure, SEO, and conversion, as well as organic social, LinkedIn, and the companys leadership presence. Prioritize additional channels, partnerships, and PR opportunities based on their relevance to our buyers.

We are looking for a builder to join our Professional Services team. Someone who writes code, ships solutions, and looks for ways to automate repetitive work. Youll work directly with customers to implement, extend, and integrate our compliance platform built on Salesforce- and just as importantly, youll build AI-powered agents and internal tools that make the whole team faster. This is a hands-on technical role: youll write code, build integrations, migrate data, and solve problems that dont always come with a clear spec.

The work spans Salesforce development, Python scripting, and AWS-based workflows. You will work across multiple projects and customer environments, often picking up requirements on the fly and figuring out the best path forward independently.

To succeed here, you need to move fast, take ownership of problems before they're fully defined, and use AI tools as a natural part of how you build- not as an occasional shortcut, but as how you actually work.

Responsibilities:
Custom Development: Design and build Salesforce solution- including Apex, LWC, and integrations- based on customer requirements.
AI Agents & Internal Tooling: Design and build AI-powered agents and internal tools that improve how the team delivers- automating repetitive work, streamlining processes, and turning good ideas into working tools without waiting to be asked.
Build Python-based scripts and tools to support customer onboarding, automation, and data processing needs.
Use AI coding tools actively throughout your work- to move faster, explore unfamiliar territory, and deliver without waiting for fully defined specifications.
Translate customer requirements- sometimes vague, sometimes complex- into working Salesforce configurations, automated flows, and integrated solutions.
Collaborate with R&D, Product, and Customer Success to ensure new platform features land well in a services context.

Were looking for a hands-on builder and technical Product Manager to lead complex, core modules within our platform for the Life Sciences ecosystem.

In this role, youll work at the intersection of customer needs, business strategy, and technology. As part of our AI-forward product organization, you will leverage modern AI tools and vibe coding to accelerate early-stage prototyping and drive solutions through the full product lifecycle.

If you enjoy diving into complex backend architectures, validating ideas directly with enterprise clients, and using AI to turn concepts into practical prototypes - this role is for you.

Responsibilities
Drive End-to-End Product Initiatives: Take ownership of complex features and workflows from initial concept to launch and customer adoption.
Rapid AI Prototyping (Vibe Coding): Utilize modern AI tools to rapidly create functional prototypes, test concepts, and clarify requirements before full development.
Enterprise Customer Discovery: Work directly with stakeholders to uncover key operational challenges and validate proposed product solutions.
Technical & Architectural Collaboration: Partner closely with System Architects and R&D to define backend structures, API integrations, data modeling, and analytics.
Cross-Functional Alignment: Collaborate with Sales, Marketing, and Customer Success to align product capabilities with market strategy and business goals.

We are seeking a highly motivated Financial Services Content Team Lead to join our team.
Our ideal candidate is someone who can manage a fast-moving project, has a sharp eye for editing, and can help develop and improve a variety of financial content assets for the content and SEO teams.
The Financial Services Content Team Lead will be responsible for managing a series of verticals in the financial services space, alongside a team of editors based out of both Israel and the U.S.

About The Position
You will be responsible for the company's SEO efforts, including onsite and offsite optimization, keyword research, maintenance & building new SEO assets for the company.
Managing and promoting the companys SEO websites
Uploading and publishing content with WordPress.
Enhancing on-site and off-site SEO efforts
Growing the sites' organic audience and rankings in the US market.
Managing a team of foreign freelancers.