לוח משרות דרושים הייטק אבטחת איכות QA משרה מלאה, לחיפוש זה נמצאו 337 משרות

You will develop automation infrastructure for validating embedded camera and depth-sensing hardware. This includes device control, power sequencing, frame capture, and external instrumentation. You will make it reliable enough to run unattended, overnight, and across many units.

You will also design, write, and maintain automated test suites covering firmware, drivers, and host software. When a test fails, you will drive it to root cause alongside the firmware, hardware, and systems engineers you work closely with. Your results will directly inform release decisions.
Responsibilities
Design automation infrastructure across host software, device interfaces (USB, serial, I2C/SPI), and lab instruments
Own the automated version release process, from firmware and software builds to automated validation gates and release reports
Design and develop a Python/Pytest test automation framework that makes tests easy to write, reuse, and run across devices and stations
Write and maintain automated test suites for firmware, drivers, and host software, including functional, negative, and long-duration stability tests
Design, build, and maintain test stations, including fixtures, wiring, and supporting MCU-based hardware
Build tooling to capture and analyze data such as raw frames, timing traces, and logs, turning the results into clear pass/fail metrics
Debug and troubleshoot software and hardware issues through to root cause
Make test results visible through dashboards, trend tracking, regression detection, and triage workflows
Document test plans, test cases, and infrastructure so others can easily run and extend them

We are seeking a Battery Testing Engineer to plan, execute, and analyze battery tests at the cell, module, and pack levels. This role is highly hands-on and data-driven, focusing on performance validation, safety testing, and reliability of battery systems throughout development and production phases.
Key Responsibilities
Develop and execute test plans for battery cells, modules, and packs, including performance, lifecycle, safety, and environmental testing.
Support prototype builds and validation testing.
Operate battery test equipment such as cyclers, thermal chambers, power supplies, load banks, and DAQ systems.
Analyze test data to evaluate capacity, efficiency, degradation, thermal behavior, and failure modes.
Define test procedures, acceptance criteria, and reporting formats in alignment with product requirements and standards.
Support abuse, stress, and safety testing (thermal, electrical, mechanical) in controlled lab environments.
Investigate test anomalies and failures, perform root-cause analysis, and support corrective actions.
Collaborate with mechanical, electrical, and thermal engineers to correlate test results with design assumptions.
Maintain test documentation, lab records, and calibration status of equipment.

About The Position
Own end-to-end quality across our company products, including web and mobile applications, backend services, embedded partner integrations, tracking systems and data flows.
Define and continuously improve the QA strategy, including regression coverage, release gates, risk assessment and production validation.
Architect, develop and maintain scalable test automation across UI, API and end-to-end system workflows.
Establish quality processes that identify defects and requirement gaps early in the development lifecycle.
Collaborate closely with Engineering, Product and DevOps to improve testability, CI/CD integration, deployment reliability and release readiness.
Analyze product requirements, challenge assumptions and proactively identify edge cases, dependencies and technical risks.
Lead, mentor and develop QA engineers while remaining deeply involved in hands-on automation and technical problem-solving.
Drive continuous improvements in automation effectiveness, test stability, defect prevention and overall delivery quality.
Take ownership of quality-related technical decisions, tooling and release recommendations.

We are looking for a Quality Assurance engineer to take a role in test planning, test design and UI, test scripting, and test execution, on Mobile (Android & iOS) and the Server side. Ensuring quality issues and defects are appropriately identified, documented, tracked, and resolved and ensure proper test coverage.
Create detailed, comprehensive, and well-structured test plans and test cases
Identify, record, document thoroughly, and track bugs
Perform thorough regression tests when bugs are resolved
Ensure the quality of new features before and after they go live
Improve the development process of our products

We are looking for a highly skilled and detail-oriented Mobile Device Security QA Engineer to join our dynamic team. In this role, you will be responsible for designing, implementing, and scaling comprehensive quality assurance strategies for our cutting-edge security product for iOS and Android mobile devices. You will drive both automated and physical testing efforts to ensure our platform meets the highest standards of security, performance, and reliability.

Responsibilities:
Performance & Usability Testing: Use relevant tools and frameworks to assess performance (e.g., loading times) and provide feedback on UI/UX issues for improved user experience.
Physical & Manual Testing: Conduct and oversee hands-on physical testing of mobile devices, ensuring that manual and automated tests accurately validate qualification features.
Test Strategy & Planning: Develop comprehensive test plans, test cases, and tailored test scripts for Android and iOS systems and applications.
Automation Development: Design and implement scalable, automated testing frameworks to simulate real-world scenarios across diverse mobile devices. Create automated scripts for regression, smoke, and feature testing.
CI/CD Integration: Integrate automated tests into continuous integration/continuous deployment (CI/CD) pipelines to support rapid, reliable releases. Monitor builds, troubleshoot integration issues, and optimize test suites.
Documentation & Reporting: Maintain detailed documentation of testing processes, results, and improvement recommendations.

we are looking for a QA/RA Manager to join our team. This is a hands-on, onsite role, based at our offices in New York or Tel Aviv.
Youll be responsible for implementing and executing QA activities throughout the software development lifecycle (SDLC), while supporting the Company compliance in accordance with applicable regulatory standards e.g ISO 13485, ISO 27001, SOC 2, ISO 14971, IEC 62304, HIPAA etc.).
You will work closely with R&D, Product and Operations teams to ensure quality is embedded from design through post-release.
Responsibilities:
Lead and oversee QA/RA activities across the full software development lifecycle (SDLC), including design controls, documentation, verification & validation, traceability, and regulatory compliance (ISO 13485, ISO 14971, IEC 62304, CE/FDA), while supporting release processes and audits.
Drive continuous improvement of core QMS processes (e.g ECO, CAPA, non-conformances, complaints, document control, management review, suppliers, training, human resources activities etc.), collaborate cross-functionally to enforce quality gates, and provide QA/RA guidance from product concept through post-market activities.

Across our global Neuroscience organization, we advance care for some of medicines most complex neurological and spinal conditions. By combining innovative technology, data-driven insights, and deep clinical expertise, we partner with physicians and health systems to improve how patients are treated and supported throughout their care journey. Our Cranial & Spinal Technologies (CST) Operating Unit develops and delivers an integrated ecosystem of spinal implants, navigation and robotic guidance systems, advanced imaging, and data-driven planning tools for complex spine and cranial procedures. Platforms such as AiBLE connect these technologies to enhance surgical precision, streamline workflows, and support improved patient outcomes worldwide.
This position has the responsibility and authority to develop and perform test automation verification & validation activities for software and systems to ensure our companys cutting edge medical products meet our users needs and our quality and reliability standards. This position requires application of technical expertise to independently determine and develop approaches to solve complex technical problems with ingenuity and creativity. Work is performed under limited direction.
Primary Responsibilities:
Develop comprehensive test strategies including requirements traceability matrices, test architecture design (unit/integration/system), and data-driven testing approaches
Designing, developing, testing, maintaining and documenting/validating software testing components and applications, utilizing AI Code Editors & IDEs (ex: Cursor), Agentic Coding, and Automated Agent Pipelines
Participate in all phases of product development as needed such as reviewing requirements, design, usability, risk assessment, and testing execution.
Contributes to the completion of work group objectives through building relationships and consensus to reach agreements on assignments.
Troubleshoot, debug, maintain, and support existing products.
Effectively communicate findings, problems and solutions to project teams and stakeholders.
Collaborate and maintain excellent working relationships with team members and stakeholders, including working meeting with team members in different countries (ex: United States, India).
Performs duties in compliance with environmental, health and safety related site rules, policies and governmental regulations.

We're looking for an Automation Engineer to join the System Automation team, the central automation team within engineering department. SA owns the company-wide system automation platform: the system, correctness and performance tests, and the pipelines that run them, across products and a rich technology stack.
Our current focus is scale and performance. We test the limits of the system, benchmark it against realistic, large-scale workloads, and catch performance regressions before every release. We're also turning that expertise into a platform, with frameworks, tooling and know-how that let product teams write and run system tests themselves. You'll work closely with developers, architects, product managers, QA and DevOps engineers, and you'll help shape both the tests and the platform.
What you'll do:
Design, build and evolve the SA platform: the frameworks, tooling and CI pipelines that run system, correctness and performance tests across products.
Plan and run system-limitations testing to find where the product breaks under data volume, concurrency and load, and turn the findings into clear, actionable results.
Build and maintain performance benchmarks on realistic workloads, and run them on to catch regressions early.
Make it easy for product teams to own their system tests by creating reusable building blocks, documentation and examples, and by coaching engineers through knowledge-sharing sessions.
Analyze results with developers and architects to pinpoint bottlenecks and drive fixes
Use AI-assisted development tools and agentic workflows to speed up test creation and maintenance, and keep up with what's changing in automation and performance engineering.

we are looking for a QC Engineer.
The Ceramic QC Lab role is responsible for operating a quality assurance lab based on existing testing systems and developing new testing methodologies. This role requires learning and applying QC testing methods, working independently to solve ceramic-related problems, maintaining attention to detail, and finding methodologies for conducting various tests.
Responsibilities:
Conduct QA Tests on Raw Materials: Perform QA tests on incoming raw materials and during their storage period, especially for materials with long storage times.
Monitor Ceramic Quality: Conduct QC tests to monitor ceramic quality throughout preparation, mixing, and printing stages.
Data Reporting: Input results to engineers at workstations and maintain direct communication to ensure consistency between measurement results and observed results in the field.
Improve Testing Methodologies: Continuously learn and enhance testing methods to refine results, ensuring up-to-date status analysis that matches results from different workstations.
Develop and Operate Monitoring Systems: Establish and operate a monitoring system for ceramic quality, accounting for calendar, process changes, equipment changes, and quality correlations between raw materials and batch variations.
Receive guidance from the Chemistry and Process teams to support QC methods.
Create Efficient QC Systems: Develop additional methods for an efficient QC system that provides an up-to-date quality status for ceramics, enabling troubleshooting without halting the process or workstations (e.g., material correction, refreshing, and adjusting working conditions to align material quality with the process).