דרושים » הנדסה » Experienced Physical Design Engineer

Which department will you join? our company's VLSI team - a group designing the EyeQ chips for ADAS and autonomous cars. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering. Each Physical Design engineer has an end to end responsibility from definition, execution & full signoffs, working closely with design & architecture teams for constraints development, design review & RTL modifications to achieve converges Were looking for a Physical Design Engineer to join the growing Physical Design Team, responsible for state of the art SoC design from definition to Tape-Out.
What will your job look like:
Hands-on physical design block owner from RTL to GDS.
Floorplan exploration with guidance and collaboration with front-end and architecture teams.
STA: work with FE and floor planner to manage block and top level constraints and 1st level of timing analysis.
Synthesis exploration and final synthesis netlist: Scan insertion @ synthesis, clean checks from Lint, UPF & Spyglass.
Place & Route: from Synthesis netlist to final layout and signoff verification with target to achieve best power performance and area.

The company's EyeC VLSI team specializes in designing advanced radar system chips for ADAS (Advanced Driver Assistance Systems) and autonomous vehicles. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering.
What will your job look like:
Design ownership on major blocks/clusters from definition to implementation phase.
Participate in various ASIC activities and flow definition which includes CDC, DFT, Lint.
Design micro-architecture of custom blocks.

Which team will you join? our company EyeC VLSI team - a group designing the chips for Radar systems for ADAS and autonomous cars. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering.
What will your job look like:
You will take a central hands-on role in Design Verification.
Define Environment micro-Architect, Implement complex UVM environment, Build vPlan .
Execute coverage implementation.
Be part of external IP verification and Internal custom IP.
Be part of System definition and top-level activity.
Take part in Silicon bring-up.

The company's EyeC VLSI team specializes in designing advanced radar system chips for ADAS (Advanced Driver Assistance Systems) and autonomous vehicles. The group is responsible for all disciplines of VLSI development, including but not limited to Logic Design, Design Verification, Microarchitecture, Analog and circuit design and layout, Physical and structural design (backend), Product and test engineering.
What will your job look like:
Design ownership on major blocks/clusters from definition to implementation phase.
Participate in various ASIC activities and flow definition which includes CDC, DFT, Lint.
Design micro-architecture of custom blocks.

The RFIC/Analog design groups in our company's Radar organization is responsible for developing the cutting edge Transceivers in mmW frequencies for the best Imaging Radar technology. The design process includes the entire process from specs to productization. To support these challenging processes, we need a skilled CAD team that will work with the design teams on all design aspects and flows from design environment setups, through design tools implementations and support and to chip level verifications and validation enablement. We're looking for an Experienced CAD or Design Automation Engineer to develop our company's RF/Analog design tools/flows and automation flows for the next-generation Imaging Radar chips.
What will your job look like:
Build and support RF/analog design environments
Implement, develop, and maintain design flows, tools and scripts.
Evaluate and explore new automation technologies and advocate for efficiency improvements
Evaluate multiple vendor solutions and guide execution, in the most optimal use, based on design needs
Effectively communicate and support a large number of designers, providing high-quality tools and flows, documentation, and presentations.

The company's EyeC VLSI team designs cutting-edge chips for RADAR systems used in ADAS and autonomous vehicles and is looking for an experienced DFT Engineer. This is a unique opportunity to join a team of top-tier engineers working with the most advanced technologies to develop Autonomous Vehicle (AV) SoCs. Every engineer in our team plays a broad and diverse role, taking on significant responsibilities, being involved in critical development stages, and making a direct impact on the success of our projects.
What will your job look like:
You'll be responsible for the architecture of DFT solutions across the SOC (MBIST, SCAN, ATPG, LBIST and more)
Develop all the necessary RTL for the different modules
Verify and Validate your design in GLS
Develop ATPG patterns to the highest requirements of Functional Safety (ISO26262).
Debug and analyze coverage and yield loss
Support production activities and Si debug.

mPrest is seeking a Lead Systems Engineer to drive the development of complex multidisciplinary projects from concept to deployment. The role involves system-level design, integration of mechanical and electrical components, coordination between engineering teams, and managing multiple parallel tasks in a dynamic environment.

Responsibilities:
Lead system engineering activities for complex, multidisciplinary defense projects
* Define system architecture, requirements, and interfaces across mechanical, electrical, and software domains
* Prepare and maintain system specifications, requirement documents, and test plans
* Collaborate with internal teams, subcontractors, and customers
* Manage risk assessments and project trade-offs
* Oversee and coordinate system integration and validation
* Participate in design reviews and lead system-level engineering discussions

our company provides modular automotive systems that transform mobility by bringing cutting-edge, safe-by-design self-driving technology and a complete, modular solution with flexible business models to the market. As a Senior HW System Architect, your role will be to work closely with our OEM partners and realize a successful integration of the ADAS to self-driving technology in these platforms
What will your job look like?
Lead end-to-end life cycle of the System architecture - from analyzing OEMs (customers) technical requirements to HW architecture definition, development and verification to ensure integration of our company's products into the vehicle platform.
Work in close collaboration with various groups including algo, HW design, verification, SW architect, Mechanics, and simulations.
Provide architectural guidance and tradeoff recommendations throughout the whole design process from concept through production.
Responsible for the main components selection and technical evaluation (trade-off between cost/performance etc.)
Provide practical system architecture definition to board designers and SW/algo by managing system external Interconnects and internal interfaces, SoC, MCU, definitions and optimization (based on OEMs requirements and other constraints).

Join our advanced packaging team to define and develop cutting-edge semiconductor package solutions for automotive-grade digital and RF System-on-Chip (SoC) products. Youll collaborate with internal teams and external OSATs to deliver high-performance, manufacturable, and reliable packages that meet stringent automotive standards.
What will your job look like:
Define and specify advanced package architectures for digital SoCs and RF ICs in automotive applications.
Perform substrate design for flip-chip BGA (FC-BGA) packages, including stack-up, routing, and ball-out optimizations.
Evaluate and select substrate technologies, materials, and package solutions based on performance, cost, and reliability.
Collaborate with OSATs to define and validate assembly materials and process flows.
Work closely with internal teams such as Backend, SIPI, Product Engineering, and Quality & Reliability to ensure seamless integration.
Monitor yield, quality, and manufacturability across package development and production stages.
Support DFM reviews and ensure compliance with automotive standards and customer requirements.

We are a green tech company unlike any other green tech company. We are a team of lateral thinkers, young professionals, and creative minds. We are fighting every day to make our mission happen Clean Power For All! With ~400GW (!) of clean power presently installed worldwide, we are more than ready to sate the worlds hunger for clean energy! Welcome at is the global leading inverter solution supplier for renewables. We want to give fresh impulses, inspire, and contribute to a sustainable development of our planet, thats why we constantly improve our portfolio. From floating solar plants to large-scale utility projects and to small residential products we always offer the best and most suitable solution. we hold more than 1500 patents no wonder as we employ the biggest research and development team of the whole industry. 40 % of all workforce is continuously investigating on how to further improve the existing portfolio. Want to know more? Check out our Job offers and let`s dive right in together!

We are looking for a skilled and driven Technical Sales Engineer to lead our Distribution product portfolio for the Residential and Commercial & Industrial (C&I) segments.
In this role, you will play a key part in shaping the future of clean energy by driving product strategy, supporting technical pre-sales activities, managing certifications, influencing customer decisions, and ensuring seamless end-to-end service delivery.
Interviews will be held in English.

Responsibilities:
Lead technical pre-sales activities, including customer meetings to assess technical requirements and develop tailored solution proposals based on product portfolio.
Own the end-to-end service process from solution delivery to after-sales technical support ensuring seamless implementation, customer satisfaction, and long-term reliability. This is a core part of the role and vital to customer experience.
Drive product certification processes, coordinating with HQ and local offices to meet all relevant standards (e.g., SII, IEC, etc.).
Support tender processes, including preparation of technical documentation and follow-up with customers at the technical level.
Manage product presentations and technical documentation, ensuring content is accurate, up-to-date, and aligned with product strategy.
Influence purchasing decisions by clearly articulating the technical, commercial, and service advantages of solutions.
Collaborate with key stakeholders, including EPCs, IPPs, investors, and distributors, to ensure smooth project execution and customer alignment.
Benchmark products against competitors to inform strategic positioning and continuous improvement.
Represent at national and international trade fairs, conferences, webinars and training sessions showcasing product capabilities and gathering market insights.
Travel regularly within Israel for customer visits, with occasional travel to Europe and headquarters in China.