לוח משרות דרושים מהנדסים

Were looking for a Hardware Qualification Engineer to join our Hardware R&D team in Tel Aviv. In this role, you'll ensure our hardware systems perform reliably under real-world conditions.
Youll work closely with our system, software, and validation teams to design and execute comprehensive qualification test plans and legal qualification requirements. Your insights will directly impact the quality, robustness, and performance of cutting-edge control systems.
Key Responsibilities:
Define and implement system-level hardware qualification procedures based on in-depth analysis of circuit and system designs.
Design and build complex test setups, integrating our hardware with advanced measurement tools.
Run and analyze qualification testsstress, thermal, performance, and edge cases.
Review test data to identify anomalies and assess hardware readiness.
Collaborate with engineering teams to communicate findings and support root-cause investigations.
Maintain clear, detailed documentation of test methods, configurations, and results.
Work with vendor laboratories to certify our systems to CE, FCC and other international requirements.

We are looking for a seasoned Electronics Engineer with over 5 years of hands-on experience in analog circuit design and power supply engineering. In this role, you will focus on developing and refining analog circuitssuch as amplifiers, filters, and DACs operating from DC to 2GHzand power supply solutions across various topologies.
As the go-to person in electronics, youll work as a key contributor and technical expert, collaborating closely with our hardware teams in Denmark and Israel, as well as operations during the NPI phase.
Key Responsibilities:
Analog Circuit Development:
Design and optimize analog circuitry, including op-amps, filters, and signal generation modules (DACs) covering frequencies from DC up to 2GHz and above.
Power Supply Engineering:
Develop robust power supply designs across various schemes (buck/boost converters, LDOs, switching regulators, etc.) that meet high-performance standards.
Lab and debug experience:
Experience in working in labs, measuring and debugging electronics.
Simulation & Design:
Utilize Altium for PCB design and LTspice for circuit simulation to validate and refine your designs.
Design for Manufacturing & Test (DFM/DFT):
Incorporate DFM and DFT best practices to ensure reliability, manufacturability, and scalability across many channels in compact form factors.
Performance & Compliance:
Ensure designs meet stringent low-noise requirements and EMI/EMC compliance for high-performance applications.
Cross-Functional Collaboration:
Work closely with hardware teams in both Denmark and Israel, and engage with operations during the NPI process to ensure seamless integration of your designs.
Technical Expertise:
Act as the electronics subject matter expert within the team, providing technical sparring and review to peers.

We are seeking an exceptional Senior K8s Software Engineer to help design and build our next-generation cloud platforms. Were looking for a deeply technical, hands-on engineer with a broad systems perspective and a passion for scalable cloud infrastructure powered by ConnectX, BlueField NICs, and GPUs. Youll join a dynamic team developing high-performance computing infrastructure used in some of the worlds largest supercomputers and data centers. This is a fast-paced, collaborative environment where youll work on innovative, next-gen products at the forefront of performance, scalability, and functionality.

What youll be doing:

Design and develop scalable, cloud-native solutions to accelerate HPC and AI workloads using our advanced technologies (GPUs, DPUs, ConnectX).

Contribute to our AI supercomputing platforms

Collaborate with cross-functional teams to deliver new features and improve existing products.

Support, maintain, and document robust software systems.

We are looking for NPI Engineer who will join the operation team and help us scale onwards!
The NPI product leader will be responsible for transitioning new products from early stage development to production level till field deployment processes. Work with cross functional teams ranging from HW designers, systems engineers, marketing and operations teams and participate in the complete product life cycle from development through build prototype until handing off the product to sustaining engineers.
The NPI product leader will manage all engineering related activities of QMs new products. The NPI PL will have a full responsibility on the overall operational activities to ensure qualified manufacturing readiness of new products.
Responsibilities:
Lead cross functional teams to execute the NPI process within the operations group.
Set an overall Operational NPI plan, Set Ops KPIs, Track and follow project progress, manage risk and report accordingly.
Define the NPI methodologies, interfaces, and process within the operation matrix to ensure smooth product introduction
Providing engineering leadership for the definition and scoping of NPI projects for all aspects of manufacturing and transitioning of projects to Manufacturing for project implementation and subsequent operation.
Ensure Design for Manufacturing guidelines are well implemented in the product design and validate implementation impact on product quality
Overall accountability of production data integrity including: BOM, production documentation, jigs and tools, product regulation.
Establishing and documenting process specifications that ensure manufacturing operations will meet product capability and quality expectations.
Analyze and recommend improvements to all production processes and methods to facilitate cost reduction and quality improvement through engineering change requests
Prepare plans for all NPI projects and coordinate with all stakeholders to ensure a good quality product represent the operations in the product life cycles gates
Serve as a technical mentor to contract manufacturing during NPI process

We are looking for Industrial Engineer for the Product Management & Configuration Team. Our Networking division is a leading supplier of innovative end-to-end InfiniBand and Ethernet connectivity solutions and services for servers and storage. We offer market-leading solutions that include adapter cards, switches, cables and software to support networking technologies. Our products optimize data center performance and deliver industry-leading bandwidth and scalability. In addition, we serve a wide range of markets including high performance computing, enterprise, data centers, cloud computing, big data and Web 2.0. We are constantly reinventing ourselves to stay ahead of the market and bring groundbreaking products and services to the industry. Our product line is focusing on delivering the most optimized Ethernet solutions for industries like Media and Entertainment as well as any other industry that can benefit from our Datastream and TCP/IP acceleration.


What you'll be doing:

Manage products Lifecycle from early development stages through mass production, until end of life. Ensuring alignment with configuration and release standards

Product Bill of Material (BOM) Management and Product configurations

Drive product configuration process improvements

Collaborate with cross-functional teams including R&D, Product Engineering, Program Managers, and Operations to ensure smooth and timely change implementation

We are looking for a talented, fast learner, and highly motivated Chip Design Verification Engineer. As a member of our Chip Design Team, you will be responsible for verifying portions of the design, of a high performance and low power chip, focusing on such tasks as micro-architectural understanding, Verification environment coding and logic debug. This position offers you the opportunity to have real impact in a dynamic, technology-focused company impacting product lines roadmap. We have crafted a team of extraordinary people, whose mission is to push the frontiers of what is possible today and define the platform for the future of computing.

What you'll be doing:

As a member of our Chip Design team, you'll own and be responsible for crafting and timely delivery of a verification components and quality of Chip Design related logic. Day to day tasks include:

Understand and analyze uArch definitions.

Implement verification components to verify RTL meets specifications.

Collaborate with our RTL, Arch and uArch teams.

Work on logic related to switch design.

We are now looking for a Senior Chip Design Engineer for the Switch Silicon group.

As a Chip Design Engineer in our Networking business unit, you'll join a group of passionate engineers to design and implement the next generation state of the art Switch Silicon chips. In this position, you'll make a real impact in a dynamic, technology-focused company while developing the industry's best high-speed communication devices, delivering the highest throughput and lowest latency!

What you'll be doing:

Work in a combined design and verification team which develops some of the switch silicon core units.

Build reference models, verify and simulate chip blocks/entities according to specifications.

Work closely with multiple teams within organizations such as Architecture, Micro- Architecture, and FW.

We are looking for a creative and independent Test Engineer for Reliability . Our Networking unit has continuously reinvented itself over two decades. Our high-speed buses & network products are leading in the markets with innovative ways to improve speed and bandwidth from one generation to another. Today, we are increasingly known as the place for getting End-to-End High-Speed Ethernet and InfiniBand Solutions We're looking to grow our company and build our teams with people who can join us at the forefront of technological advancement. We need a creative individual who will help transfer Network Silicon ICs products (Switch, NIC, SmartNic) from design engineering to mass production.

You will be exposed to various aspects of design, DFT and test of our network IC products, and will be responsible for definition and development of tests for reliability stressing of Network-ICs. In addition, your responsibilities will include working with production test and HW teams. If you are passionate about enabling of the highest quality Network products that will change the world, we want to hear from you!

What you'll be doing:

Developing test patterns and test programs for reliability evaluation.

Investigation and debug of test patterns covering a wide range of IPs and different test methods , including HW issues .

Implement IC accelerated stress tests on tester and HTOL platforms.

Developing and improving work procedures and methodologies. Working together with multiple groups silicon design, system and product engineering, test engineering, hardware and operations.

Working with analog and digital design teams, DFT, as well as Backend team for reliability stress and test definitions and problem solving.

Development and integration of system level testing for accelerated life-test.

We are seeking a Test Automation Team Leader to lead the Product Engineering Teams test automation efforts. In this role, you will guide a team of engineers in developing and maintaining automated test environments for hardware validation and production. You will combine strong technical expertise with leadership skills to define methodologies, ensure test reliability, and mentor team members while collaborating across hardware, software, and production groups.
Key Responsibilities
Lead and mentor a team of test automation engineers, providing technical guidance and career development.
Define and oversee the implementation of test automation methodologies for hardware validation and production.
Oversee the development of object-oriented Python test frameworks to support modular and reusable test automation.
Review hardware schematics and datasheets to support test planning and execution.
Collaborate with hardware engineers to define, implement, and stabilize tester-DUT setups creating stable, reliable and repeatable product test flow.
Drive SW-HW integration efforts, ensuring test environments are scalable, robust, and maintainable.
Coordinate with cross-functional teams to align test strategies with overall product engineering goals.

We are looking for an experienced hands-on Python Engineer who can work independently with remote teams (SW, HW, logic,) and create products that will shape the future of Computers.
The Computing SDK is the interface through which our customers run QM control system. Customers use it to configure their cutting-edge system and run their ground-breaking experiments. Various institutions from world-class universities to hyper-scalers use the SDK to calibrate their delicate QBits, perform Write and Read Computing Operations and run programs in higher level Computing languages like OpenQASM3.
ResponsibilitiesL:
Develop the software for the company's Computing SDK.
Take part in all the technical aspects of the SW development from design to delivery.
Work with high standards of SW methodology, clean-code and CI.

We are looking for a passionate Senior Software Engineer to join our Simulation development team. Our team is growing, and we are looking for hardworking and experienced engineers to take part in building advanced networking simulation solutions. You will be part of a team developing next generation Switch simulation, works closely with other SW R&D teams and SW Architects.

What you will be doing:

Design and develop advanced features simulating our world class Switches.

Develop solutions using advanced virtualization technology.

Write clean, efficient and maintainable code.

Collaborate with team members, SW R&D, Architects, Chip Design and FW.

We are looking for RF Integration engineer to join our Tel-Aviv RND team. As part of the role, you will characterize the performance of QM analog front end including its sensitivities and interoperability with various QUBIT types; take part in proof of concept and definition of next gen QM systems HW; will take care to validate its quality and reliability.
By joining us, youll have the chance to be involved from the early stages of architecture & design, through the development and testing phases up to end-to-end integration within QM products.

We are looking for an Firmware System Engineer to develop and deliver robust, secure, and high-quality firmware solutions for our next-generation product lines. In this role, you will collaborate closely with cross-functional teams in engineering, product management, and architecture to enable the bring-up of cutting-edge our networking and AI platforms and silicon. Your work will be key in ensuring a seamless, safe, and efficient firmware release process from development to mass production. The dynamic and fast-paced work environment will require you to excel in problem-solving and system-level debugging, all while fostering collaboration among exceptional engineers across our global sites.

What youll be doing:

Identify, diagnose, and addressing high-value problems during the product onboarding process, such as software compatibility, PCIe, security, network interoperability and communication issues between components.

Verify that all integrated components interact as intended. This includes functional testing to ensure software components work correctly on various hardware testing platforms.

Validate firmware features at hardware power-on stage.

Bridge between software, architecture, HW and production engineering teams.

Our HW team in Israel is looking for a Practical Hardware Test Engineer to join the Hardware Switch Group.

The team leads the development of networking infrastructure for our next-generation data centers, focusing on accelerated performance and optimized end-to-end GPU connectivity.

We are looking for a hands-on and detail-oriented Practical engineer with strong lab skills, who enjoys working in a dynamic, multidisciplinary environment.

What youll be doing:

Perform board bring-up, validation, and debugging activities in the lab.

Operate lab equipment such as oscilloscopes, power supplies, logic/spectrum analyzers, and multimeters.

Support hardware investigations by reading schematics, analyzing layouts, and completing test procedures.

Document test results and communicate findings clearly to engineering teams.

Work closely with electrical, mechanical, thermal, and system engineers throughout the development cycle.

We are looking for a highly experienced Backend Developer - Design and develop the core backend software layer over the company's specialized flagship product. It is a unique opportunity to join a team of top-notch engineers and work on cutting-edge technologies in a fast-paced environment of computation.
Join us in this exciting journey to redefine the future of computing.