לוח משרות דרושים חשמל ואלקטרוניקה משרה מלאה, לחיפוש זה נמצאו 2,321 משרות

we are looking for an experienced Senior Hardware Board Design Engineer to join our R&D team in Kfar Saba.
This is a hands-on technical leadership role covering the complete hardware development lifecycle-from system architecture and board design through prototype bring-up, validation, and transfer to production.
What will you do?
Lead electronic board development for power and motion control applications, from initial concept through design release
Define hardware architecture, create schematics, select components, and lead design reviews
Own and manage the BOM, including cost-performance optimization, second sourcing, component substitutions, availability, and lifecycle analysis
Work closely with PCB layout engineers to define stack-up, routing rules, power and signal constraints, EMC/EMI requirements, and DFM considerations
Prepare and support prototype PCB and PCBA manufacturing, including documentation, fabrication files, supplier coordination, and build readiness
Perform board bring-up, laboratory debugging, hardware validation, and functional testing
Define and execute hardware verification and validation plans
Support firmware engineers during hardware and software integration
Incorporate DFM and DFT requirements, test points, and panelization considerations into the design
Support prototype, sample, and pilot production with subcontractors
Support the integration of electronic boards into mechanical housings and complete systems, including connectors, harnesses, and thermal constraints
Prepare and maintain production-ready technical documentation, including schematics, BOMs, and design notes
Mentor junior engineers, lead design reviews, and establish best practices for reliable and manufacturable hardware design

we are looking for a skilled Mechanical Assembler to join our Production team in Kfar Saba.
This is an excellent opportunity to develop professionally while gaining hands-on experience with advanced products and challenging projects in the defense and industrial technology sectors.

we are looking for a motivated Technical Quality Inspector to join our Quality and Production team in Kfar Saba.
This is an excellent opportunity to gain hands-on experience, develop professionally, and work on advanced, challenging projects in the defense and industrial technology sectors.

we are looking for a technically skilled Mechanical Assembler & Product Documentation Specialist to join our team in Kfar Saba.
This is an excellent opportunity to develop professionally while working on advanced products and challenging projects in the defense and industrial technology sectors.
What will you do?
Perform mechanical assembly of prototypes and products under development
Test and validate products throughout the different development stages
Conduct functional testing at both system and circuit-board levels
Write, update, and maintain work instructions and product documentation
Support NPI processes and the transfer of products from development to production
Work closely with the R&D, Engineering, and Production teams
Document findings and prepare technical reports
Assist with troubleshooting and improving assembly and production processes

We are seeking a Product-Oriented Mechanical Engineer to lead the mechanical design and development of battery systems, from concept through production release. This role emphasizes robust, manufacturable design of battery modules and systems, and hands-on support through prototyping, validation, and industrialization.

Key Responsibilities
Design and develop mechanical architectures for battery modules and systems, including enclosures, frames, compression systems, mounts, and safety features.
Own mechanical design from concept, detailed design, and prototyping through DVT/PVT and production release.
Define and manage mechanical requirements related to strength, vibration, shock, sealing, thermal interfaces, and serviceability.
Perform structural and fatigue analysis (FEA) to validate designs against automotive, marine, or industrial standards.
Collaborate closely with thermal, electrical, and systems engineers to ensure proper integration of cells, busbars, thermal systems, and electronics.
Support battery safety design, including mechanical protection, cell retention, venting paths, and abuse mitigation features.
Support prototype builds and root-cause analysis during testing and production ramp-up.
Generate and maintain detailed drawings, BOMs, and engineering documentation.

we are seeking an experienced Vice President of R&D to lead our multidisciplinary research and development efforts. Based at our Sderot HQ, this executive role is central to developing and scaling our battery and thermal management technologies. The VP will manage all R&D functions-including thermal systems, heat transfer, mechanical design, control algorithms, and data analysis-ensuring alignment with business strategy and product roadmap
Key Responsibilities
StrategicLeadership: Define and drive the R&D roadmap in alignment with commercial, product, and operational goals.
Technology Development: Lead development of core technologies, including advanced battery modules and two-phase thermal systems.
Cross-Functional Collaboration: Work closely with Product, Project Management, Procurement, and Admin to ensure seamless development and delivery cycles.
Team Building & Mentorship: Recruit, grow, and lead a high-performing team of engineers and scientists.
Execution Excellence: Manage product development from proof of concept through TRL 6+ validation and certification (IATF, DNV).
IP Strategy & Compliance: Oversee patent filings and ensure compliance with regulatory and industry standards.
Customer & Partner Engagement: Lead technical engagement with OEMs, Tier 1s, and partners to support development milestones, PoCs, and product integration.

we are looking for a Senior Flight Control Engineer.
What you'll own:
Design, implement, and tune the vehicle's core control laws in MATLAB/Simulink, with acoustic-source models embedded directly in the design loop.
Develop control strategies that treat radiated noise as a hard constraint alongside stability margins and handling qualities, through every phase of flight.
Build and maintain the nonlinear 6-DOF simulation environment used for control design, Monte Carlo robustness analysis, and pre-flight rehearsal of every test point.
Define attitude, rate, and trajectory constraints for noise-critical flight phases - departure, approach, and low-altitude operations over populated areas - jointly with the Acoustics team.
Autocode flight-critical control software to the real-time flight computer and verify it through processor-in-the-loop and hardware-in-the-loop campaigns.
Plan and execute flight test campaigns: write test cards, monitor telemetry in real time, and lead post-flight reconciliation of data against model predictions.
Run system identification programs that anchor aerodynamic, actuator, and noise-source models in flight data, feeding corrections back into the next control law release.
Lead control law design reviews with documented stability margins, robustness analyses, and failure-mode behavior, building the evidence base certification authorities will eventually audit.

We are seeking a Battery Testing Engineer to plan, execute, and analyze battery tests at the cell, module, and pack levels. This role is highly hands-on and data-driven, focusing on performance validation, safety testing, and reliability of battery systems throughout development and production phases.

Key Responsibilities
Develop and execute test plans for battery cells, modules, and packs, including performance, lifecycle, safety, and environmental testing.
Support prototype builds and validation testing.
Operate battery test equipment such as cyclers, thermal chambers, power supplies, load banks, and DAQ systems.
Analyze test data to evaluate capacity, efficiency, degradation, thermal behavior, and failure modes.
Define test procedures, acceptance criteria, and reporting formats in alignment with product requirements and standards.
Support abuse, stress, and safety testing (thermal, electrical, mechanical) in controlled lab environments.
Investigate test anomalies and failures, perform root-cause analysis, and support corrective actions.
Collaborate with mechanical, electrical, and thermal engineers to correlate test results with design assumptions.
Maintain test documentation, lab records, and calibration status of equipment.

we are looking for a Electric Propulsion Engineer.
What you'll own:
Design and analyze motor electromagnetics with torque ripple, cogging torque, and radial force harmonics treated as hard requirements alongside efficiency and power density.
Develop inverter modulation and current-control strategies - including harmonic injection and active ripple compensation - that suppress electromagnetic excitation before it becomes radiated tone.
Build and validate multiphysics models chaining electromagnetic force prediction through structural transfer paths to radiated noise, correlated against dyno and vehicle data.
Plan and execute dyno test campaigns with synchronized electrical, vibration, and acoustic instrumentation, owning the data pipeline from raw capture to engineering verdict.
Integrate motors, inverters, and mounts into the vehicle's novel lift and propulsion architecture, working structure-borne transmission paths jointly with the Structures and Acoustics teams.
Characterize thermal behavior on the dyno and derive continuous and peak torque envelopes that hold across the full flight profile.
Define acceptance and qualification test procedures for propulsion units, including back-EMF, efficiency-map, vibration, and acoustic signature checks.
Lead propulsion design reviews and hardware failure investigations, driving root cause to closure with documented corrective actions.

we are looking for a Systems Integration Engineer.
What you'll own:
Own requirements flow-down from vehicle-level acoustic, performance, and safety targets to subsystem specifications under an ARP4754A-aligned development process.
Author and control interface definitions across structures, propulsion, avionics, and software - including the vibration, isolation, and acoustic constraints most ICDs never carry.
Build and maintain the vehicle requirements and verification database with full bidirectional traceability from stakeholder need to test evidence, and defend it in audits.
Plan and run integration campaigns on the systems bench and iron bird: power-on sequencing, interface checkout, fault injection, and end-to-end functional verification before anything flies.
Lead ground and flight test campaigns as the vehicle-level V&V owner - define test objectives, success criteria, and instrumentation requirements, then reconcile measured results against requirements line by line.
Chair cross-subsystem integration reviews and arbitrate trades where a decibel saved in one subsystem costs mass, power, or schedule in another.
Conduct safety assessment work - FHA, PSSA, FMEA, and fault trees per ARP4761 - jointly with subsystem leads, and track every derived requirement to closure.
Drive gated design reviews from SRR through test readiness with hard closure metrics: verification status, open interface items, and integration risk burn-down.