לוח משרות דרושים חשמל ואלקטרוניקה ברחובות

Required Physical Design Engineer (Backend)
Job Description:
Be part of a dynamic and motivated multi-national Physical Design team, taking part in developing a state of the art Satellite SoC through the full life cycle: design to production. The chips include complex digital and analog modules. Some of the products are part of the next generation radiation hardened satellite modems. You will have access to best in class EDA design tools and will be working in leading edge process technologies.
Physical implementation of complex SoC, VLSI devices and Test Chips, integrating custom designs and 3rd party IP (Hard, Soft, IO, CPUs, DSPs, etc)
Full block level timing closure and manufacturing checks signoff including power planning and analysis
Working alongside the Logic Design RTL team to develop timing constraints for implementation at block and chip level
Insertion of DFT test structures and chip level integration, capture and simulation.

Required Silicon product, Test and Qual engineer (ISL)
We are a leading provider of ASICs for communication satellites as well as ground and airborne terminals.
Located in Israel, UK, Bulgaria, and US, we are a technology leader in satellite communication.
You will be responsible for ensuring the quality and functionality of our silicon chips throughout the entire product lifecycle, from initial design to mass production.
You will be part of VLSI department and work closely with design engineers, manufacturing teams, and quality teams to develop and implement test strategies, methodologies, and equipment to verify and validate the performance and reliability of silicon chips.
Your primary focus will be on developing efficient test programs, conducting thorough analysis, troubleshooting any issues, and implementing solutions to improve chip performance and yield.
Job description:
Test Program Development: Design and develop test programs and methodologies for silicon chips using automated test equipment (ATE) such as wafer sorters and final test.
Test Strategy Planning: Collaborate with design and manufacturing teams to define test requirements, develop test plans and establish test strategies to ensure comprehensive chip testing.
Test Implementation: Implement test programs on ATE platforms, including test pattern generation, debugging, and optimization to meet quality and performance targets.
Data Analysis: Analyze test data and results to identify patterns, trends, and anomalies, and provide recommendations for improving chip performance, yield, and reliability.
Failure Analysis: Investigate and troubleshoot test failures, diagnose root causes, and work with cross-functional teams to implement corrective actions to address issues.
Yield Enhancement: Develop and implement yield enhancement strategies and methodologies to maximize silicon chip yield and minimize manufacturing defects.
Documentation and Reporting: Prepare test plans, reports, and documentation to communicate test methodologies, results, and recommendations to stakeholders.
Compliance and Standards: Ensure compliance with industry standards, regulatory requirements, and quality management systems (e.g., ISO 9001, AS9100) in all aspects of silicon chip qualification activities.

Required System Validation Team leader Satellite Ground Station
We have engaged with a leading customer who is building a cutting-edge Low Earth Orbit satellite constellation. As part of this engagement, we are building a state-of-the-art landing station / feeder link product to connect the satellite network with the internet cloud.
The LS includes Control and data processing HW, SW as well as Phy and Radio HW and FW, to construct a full communication system supporting DVB-S2X as well as other Radio and IP communication protocols.
This is a new product for us and is going to be written from scratch, based on existing high-end satellite communication technology. This is an opportunity to embark on a interesting and challenging adventure into the world of satellite communication which is undergoing a major disruptive revolution.
Responsibilities:
Reporting to the Director of Validation, the candidate will have the following responsibilities:
Leading the Landing station system validation activity including Phy, HW and SW validation.
Study system architecture and system requirements and build a comprehensive test plan to address these requirements in collaboration with system engineering and other teams.
Define and write automatic test plans and test procedures for new systems and features.
Build , manage and monitor team work plans.
Build test setups for fully automated regression as well as for manual tests.
Take active part, hands-on in team execution: integration and feature/product enabling, bring up and debug activities, regression automation test of satellite systems.
Record, investigate and analyze defects.
Investigation of root cause of test case failures and providing corrective action in conjunction with development teams.
Support Test Management tools and continuous integration methodologies.
Data analysis and post processing of data collected.
Compilation of regular Test execution summary report with metrics.
The work is in the Rehovot Science Park site.

Required Senior System Validation Engineer Satellite Ground Station
We have engaged with a leading customer who is building a cutting-edge Low Earth Orbit satellite constellation. As part of this engagement, We are building a state-of-the-art landing station / feeder link product to connect the satellite network with the internet cloud.
The LS includes Control and data processing HW, SW as well as Phy and Radio HW and FW, to construct a full communication system supporting DVB-S2X as well as other Radio and IP communication protocols.
This is a new product for us and is going to be written from scratch, based on existing high-end satellite communication technology. This is an opportunity to embark on a interesting and challenging adventure into the world of satellite communication which is undergoing a major disruptive revolution.
Responsibilities:
Reporting to the LS System validation TL, the candidate will have the following responsibilities:
Landing station system validation activity including Phy, HW and SW validation.
Study system architecture and system requirements and take part in a test plan to address these requirements in collaboration with system engineering and other teams.
Define and write automatic test plans and test procedures for new systems and features.
Build test setups for fully automated regression as well as for manual tests.
Take active part, hands-on in team execution: integration and feature/product enabling, bring up and debug activities, regression automation test of satellite systems.
Record, investigate and analyze defects.
Investigation of root cause of test case failures and providing corrective action in conjunction with development teams.
Support Test Management tools and continuous integration methodologies.
Data analysis and post processing of data collected.
Compilation of regular Test execution summary report with metrics.
The work is in the Rehovot Science Park site.

Youll be joining the Production group in the Operation department as an Integration Engineer:

Our role is to maintain company business by manufacturing and delivering products to our customers in the highest quality & on-time

Responsibilities
What you will be doing

Lead tool manufacturing from start to end (10 weeks project) of multidisciplinary complex systems Integration (optical, electronic, pneumatic, robotics, computing and mechanical) according to predefined procedures while overcoming quality, maturity and system issues.
Working with engineering and R&D to address systems/production process issues
Working with suppliers to address quality issues and repair
Involvement in production of repaired units (service support)
Working in organized way according to procedures

As part of your role you will collaborate closely with the Engineering, R&D, and QA departments to address complex on-tool issues and evaluate new tools and features as an integral part of the transfer to production process.

Responsibilities
What you will be doing

Lead full tool manufacturing process (2-3 weeks project).
Integration of multidisciplinary complex systems (optical, electronic, pneumatic, robotics, computing, and mechanical) according to predefined procedures while overcoming quality, maturity and system challenges.
Working with engineering and R&D to address systems/production process challenges.
Working with suppliers to address quality issues and repair recommendations.
Working in an organized way using digital procedures and flow management system.
Always striving to reduce cycle time and improve working process.
Provide guidance and support to team members in overcoming challenges with their tools.

we are looking for a Service Engineer located in Taiwan to provide product support customers.

In this role you'll be joining the Global Service Group . We provide service to a large-scale install base, at leading semiconductor manufacturers worldwide. You will be responsible for training, installing, and supporting all products at customer sites in Taiwan.



Responsibilities
What you will be doing

Implement the Customer Support Policy for the OEM End User. Supervise, maintain, and support company systems in the territory.
Support OEM partners, and End Users internal service as defined under warranty and service support agreements.
Maintain, support, and guide proper training to all users, including OEM and End User personnel.
Maintain proper reporting methods for all activities of customer support as defined by the Territory Service Manager/Customer Support Manager.
Lead technical field escalation.
Involved in product evaluations activities at customer site; make sure field and customer needs are well-represented and prioritized during the product roadmap.
Assist in new equipment integration, add-ons, and upgrades.
Provide feedback to the headquarters based on experience gained with customers.
Support the customer beyond the defined working schedule as required.

As a member of the Regulatory Affairs Department the Systems Regulatory Compliance Engineer will be part of the Hardware products Global Market Access team, responsible for escorting hardware design, certifying products towards global standards, verifying health and environmental regulations compliance, and testing for electromagnetic & radio compatibility.
Essential Duties and Responsibilities:
To monitor, interact, report, and support R&D, Engineering, and regional teams that inquire about aspects of compliance matters, enforcement actions, remedial activities, and regulatory compliance affairs.
Lead product evaluations and tests by operating external laboratories, advisors, and subcontractors to meet relevant Safety, EMC, and Environmental certifications.
Perform product safety reviews, and preliminary safety testing, facilitate agency inspections, and maintain product regulatory compliance files.
Evaluate regulatory trends and revisions.
Preparation of Technical files including the creation of a Critical Component List

We are looking for a Electronics Engineer.
As a member of Global Engineering Department, the Electronics Engineer will be part of the Hardware Regulatory Compliance Team, responsible for escorting hardware designs, certifying 3D printers towards global standards of safety, environmental, electromagnetic and radio compatibility.
What you will be doing:
Participate new design of 3D printers with responsibility over system safety, radiated emissions and signal integrity
Act as technical liaison for R&D and Engineering about various aspects of systems compliance to relevant standards
Lead product safety and EMC evaluations and tests by external laboratories, advisors, and subcontractors to meet relevant Safety, EMC, and Environmental certifications.
Perform product safety reviews, and preliminary safety testing
Facilitate agency inspections and maintain product regulatory compliance files