לוח משרות דרושים הייטק חומרה משרה מלאה, לחיפוש זה נמצאו 260 משרות

We are looking for a hands-on Hardware Design Engineer to own the full hardware lifecycle - schematic capture, PCB layout, mixed signal circuit design, power architecture, bring-up, and regulatory certification - across current and next-generation hardware.

Responsibilities

Digital Hardware Design - MCU, PHY, Ethernet & PoE

Design the complete digital hardware stack: NXP i.MX RT MCU schematic and BGA layout, Ethernet PHY circuit and controlled-impedance Ethernet routing. Design and validate the IEEE 802.3af PoE front-end : PD handshake, mid/end-span bridge rectifiers, isolated flywheel buck , and optocoupler feedback regulation; analyse cross-domain IO level margins across all MCU interfaces to confirm safe driver/receiver operation.

RF & Analog Circuit Design

Design the ISM transmit chain and 2.4 GHz AoA receive chain; simulate match networks with ADS or equivalent and validate with VNA S-parameter measurements.

PCB Design & Layout

PCB layout: Define stack-up and controlled-impedance rules; route high pin-count BGAs and high-speed peripherals with length tuning; partition RF, digital, and power domains for FCC/ETSI compliance.

Power, calibration & test: Design DCDC/LDO supplies and power distribution; define hardware test procedures for RF power and frequency calibration at production.

Production Support

Failure analysis (field & manufacturing)

Yield improvement

Cost reduction

Post-Silicon Verification Support

a provider of cutting-edge communication and connectivity devices and applications for powersports and outdoor enthusiasts. In 2026, we are proudly unveiling its Beyond Helmet line, the first of its kind in the motorcycle industry, fostering a new age in safety, sound, and communications. After pioneering the worlds first Bluetooth-based wireless intercom headset in 2004, we have been responsible for many of the industrys innovations, revolutionizing communication, pushing technological boundaries, and enhancing user safety. Now sold in over 100 countries, we are proud to be the worlds leading communication device for groups in motion. We are seeking an experienced, highly motivated HardWare Manager to lead our hardware engineering team within the R&D organization. Reporting to the VP of R&D, this senior leadership role is responsible for driving hardware development excellence across multidisciplinary products, from concept through mass production. Position Overview As the HardWare Manager, you will lead the hardware engineering team and drive the design, development, validation, and certification of complex electronic products. This role involves close collaboration with cross-functional teams, including Software, Mechanical, QA, Engineering, NPI, Purchasing, and more - to ensure seamless product development from concept through mass production. In this role, you will shape the hardware strategy, strengthen engineering processes, and ensure the delivery of high-quality, reliable, and compliant products that support our innovation and business goals.
Roles & Responsibilities
* Lead, mentor, and develop a team of 6 hardware engineers while fostering a high-performance, collaborative, and innovation-driven culture.
* Own the full hardware development lifecycle, from requirements definition and architecture through design, validation, and production release.
* Drive hardware architecture, design reviews, and technical decision-making to ensure alignment with product requirements and system constraints.
* Collaborate closely with cross-functional teams to ensure successful system integration, smooth execution, and timely product delivery.
* Define and implement testing and validation methodologies to ensure performance, reliability, safety, and compliance with industry standards.
* Lead certification and regulatory compliance activities for new and existing products, ensuring adherence to applicable standards and market requirements.
* Establish and maintain detailed documentation, including specifications, design documents, TEST plans, and reports.
* Identify and implement process improvements to enhance development efficiency, product quality, and time-to-market.
* Collaborate with Operations and manufacturing partners (EMS/ODM) to address production challenges, optimize product quality, and ensure scalable and cost-effective solutions.
* Support manufacturing activities, including design for manufacturability (DFM), design for testability (DFT), yield improvement, NPI, and production issue resolution.
* Support planning activities, including resource allocation, timelines, and risk management across hardware projects.
* Stay up to date with industry trends, emerging technologies, and competitive products to drive innovation and maintain technological leadership.

We are looking for an experienced hardware-oriented technical writer to join our ranks, mainly for documenting:

3D models of hardware
Installation or deployment procedures
Part replacement and maintenance procedures
Related software procedures
You should have a strong affinity with hardware, experience with CAD software and visual documentation, together with self-drive, a matching personality for working with SMEs and in a team, time management skills, and strong self-discipline. You will report directly to the Documentation Team Lead.

Our customers require standard PDF documents rather than an online knowledge center, so be ready to work in the traditional cover-to-cover document mindset. With that said, new delivery methods could be adopted in the future.

The role combines RF engineering, satellite communications, system analysis, and operational troubleshooting, with a strong focus on investigating and understanding complex signal behavior in satellite environments.

This role is suited for engineers who enjoy deep technical analysis, problem solving, and working with space-based systems. Satellite Communication knowledge is required.

Key Responsibilities:
Advanced analysis of satellite signals
Investigation of RF behavior and anomalies
System-level performance analysis
Field and lab activities,
Training documentation generation and presentation
Technical & Professional Requirements:
RF and communications fundamentals
SATCOM system understanding
Signal and measurement analysis
Ground segment equipment operation
General Skills & Professional Abilities:
Writing procedures and documentation
Preparing presentations
Training and technical briefings

We are looking for an experienced, hands-on, and motivated Hardware Team Lead with strong leadership and interpersonal skills to lead the Electronics team.
This role includes ownership of the electronics domain, hands-on technical leadership, and people management across all our product generations.
Were on a mission to save the world- one bee at a time.
With bee populations in global decline, we develop cutting-edge solutions at the intersection of robotics, AI, and environmental science to protect pollinators and preserve biodiversity.
Were a team of engineers, scientists, and innovators using technology for good - shaping the future of sustainable agriculture.
If youre looking to lead meaningful technology with real-world impact, wed love to have you on board.
What You'll Do
Lead the electronics domain and manage a team of electronics/board design engineers
Take hands-on ownership of electronic systems: architecture, design decisions, board design guidance, bring-up, validation, and production readiness
Drive electronics development across the full product lifecycle: requirements, design, prototyping, validation, NPI, and sustaining engineering
Define electronics design standards, best practices, and documentation
Lead system-level integration and work closely with firmware, mechanics, system, product, and operations teams
Own root-cause analysis and resolution of production and field issues
Support DFM/DFT activities and work closely with manufacturing partners
Manage external subcontractors and suppliers for PCB design and manufacturing
Plan workloads, set priorities, maintain work plans, and ensure timely project execution.

we are looking for a Hardware System Engineer to join our growing team!
This is a great opportunity to be part of the fastest-growing infrastructure company in history. we are revolutionizing data storage solutions with its Universal Storage platform, designed to simplify AI and enterprise infrastructure.
In this role, you will be responsible for qualifying hardware components such as servers, JBOFs, SSDs, network cards, switches, and optical transceivers. You will write requirement documents for new features, work with vendors on implementation and debugging, and transfer knowledge to internal teams, including software developers, QA, support, and manufacturing. Additionally, you will become the subject matter expert for specific hardware platforms and technologies. Join us and contribute to shaping the future of data management while being part of a fast-growing, innovative company.

abra is seeking for an Hardware Team Lead specializing. This role requires design and development of electronic boards for industrial applications, hardware development, simulations and testing, and close collaboration with system engineers, software developers, procurement, and manufacturing teams. In addition, the position involves PCB layout and schematic design from concept to production. This is a full-time position, Sunday–Thursday, located in Ness Ziona.

We are seeking a highly skilled and motivated VLSI Backend Team Leader to join and lead our dynamic team.
As part of this position, you will lead a team of experienced engineers working on parallel projects, and play a crucial role in the design and implementation of complex designs, flow development, and the latest technology node bring-up and integration.
The Backend team leader will be required to do 50% hands on work and 50% managerial work.

We are looking for a motivated Principal FPGA Engineer to join our team in Raanana.
You will have the chance to develop your own skills in a flexible and energetic work atmosphere with friendly and experienced colleagues. You will have helpful supervision, opportunity to learn, modern tools and flexible work culture.
If you want to be a part of our growing company that is driven by innovation and is focused on building a future together with our employees, consider applying.
Principle duties and responsibilities :
Design and develop FPGA/ASIC solutions across the full product lifecycle, including feasibility studies, architecture definition, implementation, verification, and production support
Work independently to deliver high-quality engineering solutions with minimal supervision.
Operate at the system architecture level across multiple design domains.
Serve as a Subject Matter Expert (SME) in one or more technical areas and provide consulting to other teams.
Lead and contribute to complex, high-impact projects critical to the business.
Integrate AI tools in FPGA/ASIC development process.
Mentor and provide technical guidance to junior and senior engineers.

we are looking for a Lead SoC Architect.
Responsibilities:
Definition and detailed hardware specifications of subsystems in the SoC
Breaking down the sub-system architecture into microarchitectural blocks with the related firmware, and SW components.
Understanding the system in which the SoC is integrated to and designing the SoC to perfectly fit into the datacenter system.

Analyze and investigate RF signals across the electromagnetic spectrum.
Identify and diagnose spectrum anomalies and mitigate electromagnetic interference (EMI).
Operate measurement equipment such as Spectrum Analyzer, Network Analyzer, and Signal Generator.
Collaborate with technical teams to implement RF solutions.
Job location- Central Israel
scope of hours: 100-160 hours.

Management and leadership of technological operations and projects.
Planning and execution of models and integration between technology, intelligence, and field requirements.
Operation and implementation of complex technological systems-including field work.
Matrix task management, leadership, and teamwork.

our company, a Sisram Medical company, is a global leader in medical-aesthetic technologies, with over 25 years of experience in energy-based devices (EBD). Over the years, our company has evolved into an integrated aesthetic and wellness ecosystem that combines medical devices, injectables, diagnostics, and personalized skincare. The company operates in a dynamic, innovation-driven environment, merging advanced technology with deep clinical understanding to create holistic solutions for aesthetic clinics. our companys headquarters are in Caesarea, Israel, with business operations in more than 100 countries worldwide.
* Strategic direction and leadership across Mechanical Engineering, Electronics, and NPI teams
* Drive end-to-end development processes for new products, from concept through commercialization
* Ensure delivery against development goals, timelines, and quality standards
* Push and motivate cross-functional teams to meet business and technical objectives
* Collaborate closely with multiple stakeholders, including V&V, Software, Regulatory, Quality, and Innovation
* Lead engineering activities in compliance with stringent regulatory requirements
* Support maintenance and continuous improvement of existing products, including addressing field-related challenges
* Continuously improving development processes, methodologies, and strategies