רובוט
היי א אי
stars

תגידו שלום לתפקיד הבא שלכם

לראשונה בישראל:
המלצות מבוססות AI שישפרו
את הסיכוי שלך למצוא עבודה

מהנדס אלקטרוניקה

מסמך
מילות מפתח בקורות חיים
סימן שאלה
שאלות הכנה לראיון עבודה
עדכון משתמש
מבחני קבלה לתפקיד
משרות על המפה
 
בדיקת קורות חיים
VIP
הפוך ללקוח VIP
רגע, משהו חסר!
נשאר לך להשלים רק עוד פרט אחד:
 
שירות זה פתוח ללקוחות VIP בלבד
AllJObs VIP

חברות מובילות
כל החברות
כל המידע למציאת עבודה
להשיב נכון: "ספר לי על עצמך"
שימו בכיס וצאו לראיון: התשובה המושלמת לשאלה שמצ...
קרא עוד >
לא מסתדרים עם הקולגות שלכם בעבודה?
תקשורת שעובדת בשבילך תמשיך לעבוד בשבילך לא רק ב...
קרא עוד >
טעויות נפוצות בניהול קריירה
הדרך לחיים של חוויות והזדמנויות עוברת דרך תכנון...
קרא עוד >
לימודים
עומדים לרשותכם
מיין לפי: מיין לפי:
הכי חדש
הכי מתאים
הכי קרוב
טוען
סגור
לפי איזה ישוב תרצה שנמיין את התוצאות?
Geo Location Icon

משרות בלוח החם
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 48 דקות
חברה חסויה
Location: More than one
Job Type: Full Time and Hybrid work
A leading imaging medical device company is looking for a FPGA engineer.
The candidate will primarily translate advanced algorithms-originally developed in Python or MATLAB-into high-performance FPGA implementations using VHDL and Verilog. With time, the candidate will also get involved in the general FPGA development tasks of the Elec Team.
Requirements:
B.Sc. or M.Sc. in Electrical / Electronic Engineering, Computer Engineering, or related field.
At least 3 years of experience in FPGA design, including simulation, synthesis, timing closure, and debugging.
Proven experience programming in VHDL under Vivado or similar FPGA development tools.
Proven experience in VERILOG and VHDL under QUARTUS and XILINX development tools (reading, modifying, or integrating code).
Strong understanding of digital design fundamentals: pipelining, clock domains, interfaces (AXI, SPI, etc.), and signal processing.
Familiarity with algorithm translation and fixed-point optimization.
Advantageous Skills:
o Proficiency in Python scripting for automation or algorithm modelling.
o Experience with MATLAB/Simulink for algorithm prototype development.
o Exposure to high-speed data interfaces, DSP blocks, or hardware acceleration.
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8660913
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 55 דקות
Job Type: Full Time and Hybrid work
.A leading international company is looking for a Hardware Engineer for engineering department
This position is a key part of the engineering department that is responsible for multidisciplinary products through the Product Life Cycle (PLC).
The position involves extensive communication with local and worldwide R D departments, parties in operation, subcontractors, production floors, and others.
The company is based in Netanya.
Responsibilities:
Lead the HW change on new and legacy products (EOL, Layout update)
Leads DFx and NPI procedures for new products
Leads failure analysis and reliability testing on all critical aspects of product design
Components engineer for new and existing products
Support projects and teams to ensure the design of new and existing products meet quality and reliability and apply validation tests to ensure products meet company standards
Requirements:
B.Sc. in Electronics Engineering is a must
Deep understanding of electronic design and DFM - must
Understanding multidisciplinary products design
At least 5 years of experience with worldwide compliance / regulations - must
Knowledge in electronics components, PCB and PCBA design and assembly process, batteries, radio frequency ( RF ), IR, testing methods, and knowledge in ATE (Automatic TEST Equipment)
At least 5 years of experience in board design with Altium or OrCAD - Advantage
Communication skills verbal, written, and presentation skills in both Hebrew English is must.
Experience in matrixed worldwide organization and ability to work well in a team environment including cross-culture.
Self-motivated and organized.
Ability and willingness for hands-on assignments
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8660900
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 1 שעות
Location: More than one
Job Type: Full Time and Hybrid work
The NPI/Sustain Electronics/ Hardware Engineer is an integral part of Sofwave Engineering department and will be in Yokneam, Israel, reporting to Engineering Director. The NPI/Sustain Electronics/ Hardware Engineer is responsible for supporting New Product Introduction (NPI) from design through production, ensuring manufacturability, quality, and cost targets are met. The role includes Sustaining Engineering activities such as troubleshooting field issues, implementing design improvements, and supporting continuous product optimization. The Engineer works cross-functionally with R D, quality, contract manufacturers and suppliers to resolve technical challenges, drive product readiness and enable continuous improvement. The Engineer develops and maintains engineering documentation, including work instructions, hardware/electrics schematics, TEST protocols, and validation reports.
Requirements:
B.Sc. in Electrical Engineering, Mechatronics, or a related technical field with a strong foundation in hardware design or manufacturing.
1-3 years of experience in new product introduction, product development, or manufacturing engineering, preferably in the medical device industry.
Hands-on experience with applicable tools for hardware/electronics design.
Familiarity with product lifecycle management (PLM) tools and processes.
Strong understanding of materials, manufacturing processes, and product testing methodologies.
Proficiency in root cause analysis and solving complex problems in related domain.
Excellent communication skills, both written and verbal.
Ability to work effectively in cross-functional teams and manage multiple projects simultaneously.
Availability to travel to local contract manufacturers and suppliers, as needed.
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8660888
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 3 שעות
דרושים בהטכניון - מכון טכנולוגי לישראל
מיקום המשרה: חיפה
סוג משרה: משרה מלאה
למעבדת המחקר במעגלים פוטוניים משולבים וסיבים אופטיים בטכניון דרוש/ה מנהל/ת מעבדה. קבוצת המחקר, ברשות פרופ' אבי צדוק, עברה לפקולטה להנדסת חשמל ומחשבים טכניון החל משנת הלימודים תשפ"ה לאחר 15 שנות פעילות באוניברסיטת בר-אילן. המעבדה הוקמה בשיתוף הפקולטה להנדסת חשמל ומחשבים, המכון למצב מוצק, ומרכז הקוונטים של הטכניון, בבניין המכון למצב מוצק. המעבדה כוללת כ- 10 תלמידי מחקר לתארים מתקדמים, והיא עוסקת בנושאים הבאים:
מעגלים פוטוניים משולבים, על-גבי סיליקון ("סיליקון פוטוניקס") ומצעים נוספים, לצורך תקשורת ועיבוד נתונים.
מדע וטכנולוגיה קוונטיים על-גבי סיבים אופטיים ומעגלים פוטוניים משולבים.
פתרונות חישה רגישים עבור טמפרטורה, מעוותים מכאניים, וכימיקלים שונים, על-גבי סיבים אופטיים ומעגלים פוטוניים משולבים.
פעילות המחקר בקבוצה כוללת:
אנליזה וחישובים תיאורטיים של אופטיקה לא-ליניארית ושל גלי אור וקול בהתקנים פוטוניים.
ביצוע סימולציות נומריות אלקטרו-מגנטיות ואקוסטיות.
תכנון מפורט של רכיבים מעגלים פוטוניים משולבים.
ייצור מעגלים פוטוניים משולבים במסגרת micro-nano fabrication unit (MNFU) של הפקולטה להנדסת חשמל ומחשבים ובאמצעות ספקים חיצוניים.
איפיון מעגלים פוטוניים משולבים, ושימוש בהם במערכי ניסוי מורכבים למטרות תקשורת נתונים, חישה, ומדע וטכנולוגיה קוונטיים.
הקמה ותפעול ניסויי מערכת מורכבים על-בסיס סיבים אופטיים, לצרכי חישה, עיבוד נתונים, ומדע וטכנולוגיה קוונטיים.
פעילות המחקר בקבוצה ממומנת בחלקה על-ידי מענקי מחקר מהאיחוד האירופי (ERC), הקרן הלאומית למדע, הרשות לחדשנות, ואחרים. פרוייקטי המחקר כוללים שיתוף פעולה רצוף והדוק עם קבוצות מחקר נוספות במסגרת הפקולטה להנדסת חשמל ומחשבים, המכון למצב מוצק, ומרכז הקוונטים, עם קבוצות מחקר נוספות באקדמיה הישראלית והעולמית, ועם תעשייה רלוונטית.
מטרות התפקיד העיקריות הן:
1. שותפות בביצוע מחקר והנחיית סטודנטים בתחומי העיסוק של קבוצת המחקר.
2. שותפות בפיתוח תהליכי פבריקציה ואנליזה של מעגלים ננו-פוטוניים משולבים, בשילוב עם MNFU.
3. הצטיידות, תפעול שוטף ושדרוג תקופתי של מעבדת המחקר ותשתיות המחקר של הקבוצה.
בפרט, בשנים הראשונות מנהל/ת המעבדה יהיה/תהיה שותפ/ה להקמת מעבדת המחקר החדשה בטכניון, העברה וקליטה של ציוד קיים של קבוצת המחקר מאוניברסיטת בר-אילן לטכניון, ואפיון, רכש, והתקנה של מכשור חדש למעבדת המחקר.
התפקיד כולל אפשרות להגדרה וביצוע של מחקר עצמאי, השתתפות והצגה בכנסים בינלאומיים, הובלה של פרויקטים בשיתוף חברות תעשיה, ועבודה בממשקים מגוונים בטכניון, בארץ, ובחו"ל.
דרישות:
כישורים:
השכלה: תואר שני ומעלה בהנדסת אלקטרוניקה, הנדסת חומרים, פיזיקה, או כימיה.
כושר לימוד מהיר של נושאים חדשים ויכולות טכניות גבוהות, hands on approach
יכולת בינאישית גבוהה, בפרט יכולת גבוהה לעבודת צוות.
יכולת אנליטית גבוהה, יכולת ארגון וסדר, כתיבת דוחות מדעיים.
ניסיון במעבדת אופטיקה
שפות: עברית ואנגלית ברמה גבוהה.
יתרונות:
תואר שלישי
ניסיון בניהול מעבדה
ניסיון בניהול פרויקטים וניהול צוות
ניסיון בפיתוח תהליכי פבריקציה ועבודה בחדרים נקיים
ניסיון בביצוע סימולציות נומריות של גלים אלקטרו-מגנטיים ו/או גלים מכאניים
ניסיון בתכנון וביצוע ניסויי מעבדה מורכבים ברמת מערכת
רקע בעיבוד אותות
ניסיון בהוראה

הערות:
המשרה הינה בהיקף 100% עם נוכחות מלאה בקמפוס בטכניון
* המשרה מיועדת לנשים ולגברים כאחד.
המידע שיימסר על ידך ישמש את הטכניון – מכון טכנולוגי לישראל ו/או מי מטעמו, לצורך בחינת מועמדותך למשרה, לרבות מועמדות למשרות נוספות, וכן לצורך ניהול ותפעול הליכי הגיוס, ולמטרות נוספות בהתאם להודעת הפרטיות למועמדים למשרה בטכניון.
לא חלה עליך חובה חוקית למסור את המידע, אולם אם תבחר/י שלא למסור את המידע, כולו או חלקו, ייתכן שלא ניתן יהיה לבחון את מועמדותך או את התאמתך למשרה.
למידע נוסף, לרבות פירוט סוגי המידע הנאספים והשימושים הנעשים בו, זהות הגורמים שאליהם עשוי המידע להימסר, אופן מימוש זכויותיך לעיון ולתיקון מידע אישי, ודרכי יצירת קשר – ניתן לעיין בהודעת הפרטיות למועמדים למשרה, כפי שמפורסמת באתר הטכניון.

הטכניון פועל לגיוון תעסוקתי ומעודד הגשת מועמדויות מכלל המגזרים
التخنيون يعمل على تعددية التشغيل ويشجع التقديم للمناقصات من جميع الأوساط
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8627262
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 3 שעות
דרושים ברכבת ישראל
מיקום המשרה: חיפה
סוג משרה: משרה מלאה
לרכבת ישראל דרוש/ה מנהל /ת פיתוח ושדרוג מערכות הפעלה התפקיד כולל אחראיות להובלת ווידוי של תהליכי עבודה תקינים וסדורים בהתקנות/עדכונים של תוכנות ומערכות קיימות/חדשות מול כלל הגורמים הרלוונטיים,ריכוז תקלות,באופן שוטף, במערכות וניתוח הנתונים לצורך הפקת לקחים ושיפור המערכת, והובלת פיתוח ושדרוג מערכות איתות במשוא"ה 


*למטרת ייצוג הולם ברכבת ישראל, בגיוס למשרה זו תינתן עדיפות למועמדים הבאים: בני האוכלוסייה הערבית, הדרוזית, מי שהוא או שאחד מהוריו נולדו באתיופיה, נשים, בני האוכלוסייה החרדית, אנשים עם מוגבלות משמעותית כהגדרתה בחוק שוויון הזדמנויות לאנשים עם מוגבלות, התשנח - 1998 ונכי צהל
דרישות:
דרישות סף:
    תואר ראשון כמהנדס בתחומים: מדעי המחשב/ אלקטרוניקה/ חשמל  או הנדסאי בתחומים: מדעי המחשב/ אלקטרוניקה/ חשמל
    ניסיון מוכח של 3 שנים לפחות כמהנדס בבדיקות חומרה / תוכנה ו/או ניהול פרויקטים ו/או ניהול ממשקים בין מערכות ממוחשבות שונות או 7 שנים ניסיון כהנדסאי בבדיקות חומרה / תוכנה ו/או ניהול פרויקטים ו/או ניהול ממשקים בין מערכות ממוחשבות שונות
    ניסיון בהפעלת קבלנים ו/או ספקים
    ידע בתוכנות ה OFFICE 
דרישות המהוות יתרון:
    ניסיון בעבודה בתוכנת ה SAP  
כישורים נוספים:
    כושר ביטוי בכתב ובעל פה בשפה העברית- ברמה טובה
    כושר ביטוי בכתב ובעל פה בשפה האנגלית- ברמה טובה
דרישות נוספות לתפקיד:
    נכונות לעבודה בשעות לא שגרתיות
מיקום: חיפה
ניתן להגיש מועמדות עד ליום 31/05/2026 המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8655325
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 3 שעות
דרושים בAlljobs Match
Job Type: Full Time
We are looking for a Power Electronics Engineer to join a leading R&D department (~60 engineers) and take part in the development of advanced power supply systems.

Responsibilities:
Design and development of power supply electronic boards
Work on DC-DC, AC-DC, and PFC systems
Integration, validation, and electrical testing of modules
Performance analysis, optimization, and lab experiments
Full lifecycle ownership - from concept to production
Requirements:
4-5 years of experience in power electronics / analog design
Experience with DC-DC, AC-DC, and PFC converters
Strong background in analog circuit design (feedback loops, amplifiers, switching components)
Experience with simulation tools (Matlab, PSpice, LTspice)
Hands-on experience with GaN, SiC, MOSFET, IGBT
Lab testing experience (Oscilloscope, Spectrum Analyzer, Load testing)
PCB design experience (Altium, Cadence, OrCAD)
Familiarity with communication protocols (CAN, SPI, I²C)
B.Sc. in Electrical Engineering
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8636467
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 4 שעות
דרושים בAlljobs Match
סוג משרה: משרה מלאה
לחברה מצליחה בכרמיאל, דרוש/ה מהנדס/ת קושחה משובצת


מה בתפקיד?
פיתוח ותכנון קושחה למיקרו-בקרים מתקדמים (כולל Multi-Core)
עבודה על ממשקי משתמש, DSP, פרוטוקולי תקשורת ולולאות משוב
פיתוח על חומרה פעילה ועבודה עם ציוד מעבדה מתקדם
שיתוף פעולה עם צוותי חומרה וניהול פרויקטים
דרישות:
5+ שנות ניסיון בפיתוח Embedded Firmware
תואר ראשון בהנדסת חשמל / מדעי המחשב
ניסיון עם ממשקי חומרה: UART, SPI, I2C, CAN
אנגלית ברמה גבוהה

יתרונות:
ניסיון עם מעבדי ARM מרובי ליבות
היכרות עם פרוטוקולים: RS232/485, USB, LAN, EtherCAT, Modbus ועוד
ניסיון בלולאות משוב דיגיטליות המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8636469
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 4 שעות
דרושים בהטכניון - מכון טכנולוגי לישראל
מיקום המשרה: חיפה
סוג משרה: משרה מלאה
מעבדת ההוראה משרתת כ-800 סטודנטים בשנה בביצוע ניסויים בסיסיים באלקטרוניקה בשנה השניה והשלישית ללימודים.
התפקיד כולל ניהול מלא של המעבדה:
ניהול צוות של מהנדס נוסף במעבדה ושל אדמינית למנהלות
ניהול הכשרה והדרכה של כ20 מתרגלים, חלקם מהנדסים מנוסים וחלקם מלגאים
רכש, גיוס תרומות, גיוס מהנדסים
ניהול הסילבוס האקדמי
פיתוח ניסויים מתקדמים בתחומים אנלוגיים, ספרתיים ומשולבים, לרבות כתיבת הניסויים, מצגות הדרכה, פיתוח חומרה ותוכנה לניסויים
אחריות לבטיחות תהליכי העבודה.
דרישות:
בוגר/ת פקולטה להנדסת חשמל, עדיפות לבעל/ת תואר שני או שלישי
ותק מקצועי בתעשייה של 10 שנים ומעלה בתחומי אלקטרוניקה אנלוגית, ספרתית ותכנון בעזרת מחשב
ידע נרחב בתכנות VERILOG ומערכות סימולציה לתחומים אנלוגיים וספרתיים
ידע נרחב ביסודות אלקטרוניקה- התקני מל"ם מגברי שרת ועיבוד ספרתי
ניסיון מוכח בניהול פרויקטים, בנית תקציבים, ניהול צוות עובדים ומדריכים
ניסיון מוכח בהדרכה והנחיה לסטודנטים
עבודת צוות עם סטודנטים וצוות המעבדה, יכולת הוראה פרונטלית
יחסי אנוש טובים
נכונות לעבודה בשעות גמישות בהתאם לצרכי העבודה.

הערות
המשרה הינה בהיקף 100%.
* המשרה מיועדת לנשים ולגברים כאחד.
המידע שיימסר על ידך ישמש את הטכניון – מכון טכנולוגי לישראל ו/או מי מטעמו, לצורך בחינת מועמדותך למשרה, לרבות מועמדות למשרות נוספות, וכן לצורך ניהול ותפעול הליכי הגיוס, ולמטרות נוספות בהתאם להודעת הפרטיות למועמדים למשרה בטכניון.
לא חלה עליך חובה חוקית למסור את המידע, אולם אם תבחר/י שלא למסור את המידע, כולו או חלקו, ייתכן שלא ניתן יהיה לבחון את מועמדותך או את התאמתך למשרה.
למידע נוסף, לרבות פירוט סוגי המידע הנאספים והשימושים הנעשים בו, זהות הגורמים שאליהם עשוי המידע להימסר, אופן מימוש זכויותיך לעיון ולתיקון מידע אישי, ודרכי יצירת קשר – ניתן לעיין בהודעת הפרטיות למועמדים למשרה, כפי שמפורסמת באתר הטכניון.

הטכניון פועל לגיוון תעסוקתי ומעודד הגשת מועמדויות מכלל המגזרים
التخنيون يعمل على تعددية التشغيل ويشجع التقديم للمناقصات من جميع الأوساط
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8587754
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 4 שעות
דרושים בAlljobs Match
סוג משרה: משרה מלאה
אנחנו מגייסים מהנדס/ת פיתוח למחלקת R&D מובילה (~60 עובדים), לעבודה על פיתוח כרטיסים אלקטרוניים לספקי כוח מתקדמים.

תחומי אחריות:
פיתוח ותכנון כרטיסים אלקטרוניים לספקי כוח
עבודה על מערכות DC-DC, AC-DC ו-PFC
אינטגרציה, בדיקות וולידציה למודולים
ביצוע אנליזות ביצועים, אופטימיזציה וניסויי מעבדה
ליווי המוצר מקונספט ועד מוצר מוגמר
דרישות:
ניסיון של 4-5 שנים בפיתוח ספקי כוח / מעגלי הספק ואנלוג
ניסיון בתכנון DC-DC, AC-DC ו-PFC
ניסיון בתכנון מעגלים אנלוגיים (Feedback, מגברים, רכיבי מיתוג)
עבודה עם כלי סימולציה: Matlab / PSpice / LTspice
ניסיון עם רכיבי הספק: GaN, SiC, MOSFET, IGBT
ניסיון בעבודה עם ציוד מעבדה (Oscilloscope, Spectrum Analyzer)
ניסיון בתכנון PCB (Altium / Cadence / OrCAD)
היכרות עם פרוטוקולי תקשורת: CAN, SPI, I²C
תואר בהנדסת חשמל ואלקטרוניקה המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8636466
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 4 שעות
דרושים בהטכניון - מכון טכנולוגי לישראל
מיקום המשרה: חיפה
סוג משרה: משרה מלאה
הפעלה ותחזוקה של מכשירי דימות פרה-קליניים (MRI, CT, US, IVIS).
פיתוח ואופטימיזציה של פרוטוקולים להדמיה.
עיבוד וניתוח מתקדם של נתוני הדמיה.
עבודה מול חוקרים (סטודנטים ואנשי סגל) לפיתוח וביצוע מחקרים מבוססי הדמיה.
הדרכת משתמשים חדשים בתפעול המערכות.
כתיבה ושמירה על רישומים מדויקים ומעודכנים של מחקרי הדמיה.
דרישות:
- תואר שני או שלישי בהנדסה/רפואה/מדעי החיים/פיזיקה או תחום מקביל.
- ניסיון בעבודה ותפעול מכשירי הדמיה: אולטרסאונד/ CT/הדמיה אופטית ו/או MRI.
- יכולת תכנות ושימוש בתוכנות מתקדמות לאנליזה וכלים מבוססי python/AI - יתרון משמעותי.
- יכולת עבודה עם בעלי חיים קטנים.
- ניסיון בעבודה בסביבה ממוחשבת.
- שליטה מעולה בעברית ואנגלית כולל יכולת ניסוח גבוהה.
- יחסי אנוש מצוינים ותודעת שירות גבוהה.
- יכולת עבודה עצמאית ועבודה בצוות.

הערות:
המשרה הינה בהיקף של 100% משרה.
* המשרה מיועדת לנשים ולגברים כאחד.
המידע שיימסר על ידך ישמש את הטכניון – מכון טכנולוגי לישראל ו/או מי מטעמו, לצורך בחינת מועמדותך למשרה, לרבות מועמדות למשרות נוספות, וכן לצורך ניהול ותפעול הליכי הגיוס, ולמטרות נוספות בהתאם להודעת הפרטיות למועמדים למשרה בטכניון.
לא חלה עליך חובה חוקית למסור את המידע, אולם אם תבחר/י שלא למסור את המידע, כולו או חלקו, ייתכן שלא ניתן יהיה לבחון את מועמדותך או את התאמתך למשרה.
למידע נוסף, לרבות פירוט סוגי המידע הנאספים והשימושים הנעשים בו, זהות הגורמים שאליהם עשוי המידע להימסר, אופן מימוש זכויותיך לעיון ולתיקון מידע אישי, ודרכי יצירת קשר – ניתן לעיין בהודעת הפרטיות למועמדים למשרה, כפי שמפורסמת באתר הטכניון.

הטכניון פועל לגיוון תעסוקתי ומעודד הגשת מועמדויות מכלל המגזרים
التخنيون يعمل على تعددية التشغيل ويشجع التقديم للمناقصات من جميع الأوساط
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8627377
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
לפני 23 שעות
דרושים בכללית הנדסה רפואית בע"מ
מיקום המשרה: עפולה וחיפה
סוג משרה: משרה מלאה
תמיכה כוללת למכשור ולמערכות הרפואיות במרכז רפואי העמק ובמרפאות של שירותי בריאות כללית במרחב צפון
תיקון תקלות במכשירים
מתן פתרונות ושירותים למכשור רפואי מתקדם
השתתפות בהשתלמויות והסמכות מקצועיות בארץ ובחו"ל
משרה מלאה א-ה + כוננויות בתשלום בכול ימות השבוע
עבודה בשילוב של עבודת שטח וכרוכה בנסיעות למרפאות בין בתי חולים/ מרפאות
דרישות:
הנדסאי/ת ו/או מהנדס/ת אלקטרוניקה - חובה
ניסיון בעבודה על מערכות משולבות (מכניקה / חשמל / אלקטרוניקה) - יתרון
ניסיון במכשור רפואי - יתרון משמעותי
ידע מוכח במערכות מחשוב / תקשורת
רישיון נהיגה בוותק 3 שנים לפחות - חובה
אנגלית ברמה טובה חובה
יכולת למידה גבוהה המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
7884799
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
1 ימים
דרושים באלביט מערכות
מיקום המשרה: חיפה
סוג משרה: משרה מלאה
לאתר החברה בחיפה דרוש.ה מהנדס.ת בדיקות למעבדת EMC
במסגרת התפקיד- ביצוע והובלת ניסויים ובדיקות אלקטרומגנטיות למגוון מוצרים טכנולוגיים מתקדמים

התפקיד כולל
ביצוע בדיקות EMI למגוון מוצרי החטיבה על פי תקני בחינה RTCA- DO - 160 MIL - STD - 461
ביצוע בדיקות של ספקי כוח על פי תקני MIL - STD - 704, MIL - STD - 1275, MIL - STD - 1399, RTCA - DO - 160
עבודה בסביבה אוטומטית ומתקדמת
עבודה במעבדה מוסמכת ISO/IEC 17025
התפקיד כולל הקמת מערכי בדיקה, ביצוע בדיקות בפועל וכתיבת דוחות
דרישות:
מהנדס או הנדסאי אלקטרוניקה
ניסיון של 5 שנים לפחות בביצוע מדידות עם ציוד כגון: Signal Generator, Scope, Spectrum, Spectrum Analyzer, AC Power Source- חובה
הכרת תקנים MIL STD 461 RTCA DO 160- יתרון משמעותי
ניסיון בבדיקת ספקי כוח על פי התקנים הבאים: MIL STD 704, MIL STD 1275, MIL STD 1399, RTCA DO 160- יתרון משמעותי
ניסיון בעבודה במעבדה מוסמכת ISO/IEC 17025- יתרון משמעותי
ניסיון במדידות EMI - יתרון משמעותי
יחסי אנוש, עבודת צוות ומתן שירות
אנגלית- קריאה וכתיבה ברמה גבוהה - חובה

**רק פניות מתאימות יענו המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8550628
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
1 ימים
דרושים במיטרוניקס
Job Type: Full Time
Our Engineering team leads the bridge between technology, innovation, and design to production.
We aim to provide high-quality, professional service by preventing issues in advance and solving them in Real-Time.
We are looking for a hands-on ATE Electronic Engineer with extensive experience in developing electrical cabinets to interface with testing instruments (Bed of Nails, ICT, Spectrum Analyzer). In this role, you will collaborate with Mechanical and software engineers to define, design, develop, TEST, debug, and maintain electronic modules for automatic testing systems.
Responsibilities
Design Development: Design, modify, and maintain hardware modules and electrical cabinets for automated testing systems.
DFT Collaboration: Early involvement in the electrical modules' development phase to ensure DFT (Design for Testing) requirements are met. Work closely with mechanical a
Requirements:
Education: B.Sc. in Electronic Engineering OR an experienced Practical Engineer with a proven track record.
Experience: 1-3 years of experience in circuit and electrical design.
Technical Skills: * Experience in automation TEST equipment design.
Proficiency with laboratory tools (Scope, Signal Analyzer, Spectrum Analyzer).
Hands-on experience with Altium or other HW CAD tools.
Advantages:

Knowledge and experience in operating FP/ICT machines.
Experience with ERP PLM systems.
Experience in LEAN and Agile methodologies.
Attributes: Strong problem-solving skills, ability to work in a multi-disciplinary environment, and a "hands-on" approach.
This position is open to all candidates.
 
Show more...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8638912
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
1 ימים
דרושים בSCD
סוג משרה: משרה מלאה ומשמרות
חברת SCD מגייסת מהנדס/ת פיתוח כרטיסים
מנוסה לתכנון ופיתוח כרטיסים מתקדמים
הגדרת דרישות חומרה ופיתוח כרטיסים
תכנון סכמות רב שכבתיים
ולידציה לממשקים מהירים
ניתוח וסימולציות ועבודה עם ציוד מעבדה
שיתוף פעולה עם צוותי תוכנה ומכניקה
תמיכה ופתרון בעיות ייצור
דרישות:
תואר בהנדסת חשמל אלקטרוניקה-חובה
7+ שנות ניסיון בתכנון כרטיסים
ניסיון בסימולציות וציוד מעבדה
המשרה פונה לנשים וגברים כאחד המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8570559
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
דרושים במעוף- מגדל העמק פרופשיונל
מיקום המשרה: מספר מקומות
סוג משרה: משרה מלאה
לחטיבת הסמי בחברה תעשייתית מתקדמת דרוש/ה מהנדס/ת אלקטרוניקה לעבודה בצוות פיתוח מערכות.
, עם התמחות בפיתוח, ייצור ותפעול של מערכות עבור לקוחות גלובליים מובילים כגון Intel ו-TSMC.

תכנון, פיתוח ובדיקה של מעגלים אנלוגיים ודיגיטליים
דגש על זיהוי ועיבוד אותות אנלוגיים חלשים
פיתוח מעגלים ומערכות כולל:
מסננים
מגברים ברעש נמוך
ממשקי תקשורת
עבודה עם FPGA - תכנות ובנייה של לוגיקה דיגיטלית
תכנון שרטוטי PCB
תמיכה בבדיקות מוצר ואימות עמידה בדרישות רגולציה (תקינות, ביצועים)
איתור תקלות ופתרונן - כולל ליווי בתפעול ובייצור
תיעוד טכני, הכנת BOM, מעקב שינויים הנדסיים
דרישות:
תואר ראשון (לפחות) בהנדסת חשמל/אלקטרוניקה - עדיפות לאלקטרוניקה
ניסיון של לפחות 3 שנים בתכנון מעגלים אלקטרוניים / דיגיטליים
ניסיון מוכח בזיהוי ועיבוד אותות אנלוגיים חלשים
סיון בתכנות FPGA
ידע טוב בבקרים משובצים ( Embedded )
היכרות עם פרוטוקולי תקשורת כגון: USB, I2C, SPI
ניסיון עם מערכות הפעלה בזמן אמת (RTOS) המשרה מיועדת לנשים ולגברים כאחד.
 
עוד...
הגשת מועמדות
עדכון קורות החיים לפני שליחה
8563282
סגור
שירות זה פתוח ללקוחות VIP בלבד
לוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
6 ימים
Location: Haifa
Job Type: Full Time
we're seeking a visionary Physical Design Engineer to help build our local engineering powerhouse from the ground up. This is a unique opportunity to take on meaningful product ownership in a new site, defining the backend execution and methodologies for chips that power the world's largest AI clusters.

As a Physical Design Engineer, you will be a key architect of our silicon's physical reality. You won't just execute a flow-you will help establish our local execution culture and technical standards, owning the transformation of complex logic into high-performance silicon. You will drive the physical implementation journey from synthesis through signoff, ensuring our connectivity solutions meet the extreme performance, power, and area targets required for next-generation AI infrastructure. If you thrive on solving complex challenges in deep-submicron processes and want to shape the backend methodology for AI infrastructure connectivity, this is your opportunity.

Key Responsibilities

Physical Implementation & Execution

Be part of the founding Backend team in Israel, playing a critical role in establishing local execution culture and technical standards
Take full responsibility for physical implementation journey including Synthesis, Floorplanning, Place & Route, and Clock-Tree Synthesis (CTS)
Own macro-level implementation with deep hands-on experience in floorplanning and complex routing
Signoff & Design Integrity

Drive final stages of design integrity, owning Timing signoff (STA), Physical Verification (DRC/LVS), and Reliability analysis (EMIR)
Ensure first-pass silicon success through rigorous signoff flows and analysis
Apply Logic Equivalence Checking (LEC) and other verification techniques to guarantee design correctness
Methodology Development & Cross-Functional Collaboration

Participate in defining and refining Backend methodologies with autonomy to improve workflows and tool automation
Work closely with Architecture, Design, and DFT teams to navigate challenges of advanced process nodes and high-speed connectivity
Leverage scripting and automation to make engineering environment faster and more robust
Requirements:
Bachelor's degree in Electrical Engineering or related technical field
3+ years of hands-on experience in Physical Design at semiconductor companies
Proven expertise in the full RTL2GDS flow with deep hands-on experience in macro-level implementation, floorplanning, and complex routing
Experience working with advanced process technologies (7nm and below)
Solid experience with signoff tools and flows including STA, Logic Equivalence Checking (LEC), DRC, and EMIR analysis
Proficiency in TCL or Python scripting to drive EDA tool flows and automate repetitive tasks
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8652218
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
6 ימים
Location: Haifa
Job Type: Full Time
we're seeking a visionary Physical Design Engineer to help build our local engineering powerhouse from the ground up. This is a unique opportunity to take on meaningful product ownership in a new site, defining the backend execution and methodologies for chips that power the world's largest AI clusters.

As a Physical Design Engineer, you will be a key architect of our silicon's physical reality. You won't just execute a flow-you will help establish our local execution culture and technical standards, owning the transformation of complex logic into high-performance silicon. You will drive the physical implementation journey from synthesis through signoff, ensuring our connectivity solutions meet the extreme performance, power, and area targets required for next-generation AI infrastructure. If you thrive on solving complex challenges in deep-submicron processes and want to shape the backend methodology for AI infrastructure connectivity, this is your opportunity.

Key Responsibilities

Physical Implementation & Execution

Be part of the founding Backend team in Israel, playing a critical role in establishing local execution culture and technical standards
Take full responsibility for physical implementation journey including Synthesis, Floorplanning, Place & Route, and Clock-Tree Synthesis (CTS)
Own macro-level implementation with deep hands-on experience in floorplanning and complex routing
Signoff & Design Integrity

Drive final stages of design integrity, owning Timing signoff (STA), Physical Verification (DRC/LVS), and Reliability analysis (EMIR)
Ensure first-pass silicon success through rigorous signoff flows and analysis
Apply Logic Equivalence Checking (LEC) and other verification techniques to guarantee design correctness
Methodology Development & Cross-Functional Collaboration

Participate in defining and refining Backend methodologies with autonomy to improve workflows and tool automation
Work closely with Architecture, Design, and DFT teams to navigate challenges of advanced process nodes and high-speed connectivity
Leverage scripting and automation to make engineering environment faster and more robust
Requirements:
Bachelor's degree in Electrical Engineering or related technical field
3+ years of hands-on experience in Physical Design at semiconductor companies
Proven expertise in the full RTL2GDS flow with deep hands-on experience in macro-level implementation, floorplanning, and complex routing
Experience working with advanced process technologies (7nm and below)
Solid experience with signoff tools and flows including STA, Logic Equivalence Checking (LEC), DRC, and EMIR analysis
Proficiency in TCL or Python scripting to drive EDA tool flows and automate repetitive tasks
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8652216
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
6 ימים
Location: Haifa
Job Type: Full Time
we're seeking a talented Senior ASIC Design Engineer to help build our local engineering powerhouse from the ground up. This is an exciting opportunity to take on meaningful product ownership in a new site, designing the digital blocks that sit at the heart of our most ambitious connectivity projects.

As a Senior ASIC Design Engineer, you won't just build chips-you will be part of a team defining the next generation of AI infrastructure main components. The complex digital blocks under your micro-architecture and implementation responsibilities will power the world's largest AI clusters. You will own the journey from high-level definition through RTL implementation and backend support, transforming complex logic challenges into elegant, high-performance hardware. If you thrive on solving challenging problems in deep-submicron processes and want to contribute to the digital design foundation for AI infrastructure connectivity, this is your opportunity.

Key Responsibilities

Design Ownership & Implementation

Own the journey from high-level definition through micro-architecture, coding, and debug to backend implementation support
Tackle complex logic challenges and transform them into elegant, high-performance hardware solutions
Serve as the point of contact for your logic blocks, interacting with Architecture, Verification, and Backend teams
Quality Assurance & Design Optimization

Utilize industry-leading EDA tools (Lint, CDC, Synthesis, Timing, Power) and in-house quality assurance tools to ensure designs are robust, scalable, and power-efficient
Apply design techniques to meet PPA (Power, Performance, Area) targets
Contribute to design quality through verification and validation activities
Methodology Innovation & Collaboration

Participate in design methodology improvements and tool automation initiatives
Leverage AI assistance tools and contribute to in-house automation development to make engineering workflows faster and smarter
Collaborate effectively across teams to ensure seamless integration
Requirements:
Bachelor's degree in Electrical Engineering or related technical field
3+ years of experience in logic design at semiconductor companies
Knowledge and experience in Verilog and/or SystemVerilog
Excellent communication skills with ability to work effectively across teams
Understanding of digital design principles and RTL coding best practices
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8652213
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
6 ימים
Location: Haifa
Job Type: Full Time
we're seeking a visionary Senior DFT Engineer to help build our local engineering powerhouse from the ground up. This is a unique opportunity to take on meaningful product ownership in a new site, ensuring the reliability and testability of chips that power the world's largest AI clusters.

As a Senior DFT Engineer, you will be at the intersection of architecture, design, and production. You won't just run tools-you will be a foundational member of the team responsible for the entire lifecycle of our silicon's reliability. From defining initial DFT architecture to supporting post-silicon bring-up, your work ensures that the backbone of AI infrastructure connectivity is flawless and scalable. If you thrive on solving complex challenges in deep-submicron processes and want to establish world-class DFT methodologies, this is your opportunity.

Key Responsibilities

DFT Architecture & Strategy

Own the DFT journey from high-level architecture definition and RTL design to backend implementation and post-production support
Develop comprehensive Design-for-Testability (DFT) strategies for next-generation connectivity platforms, ensuring chips meet the highest quality standards
Define DFT architectures including JTAG/iJTAG, MBIST, Scan, and ATPG methodologies
Test Pattern Development & Optimization

Generate and optimize high-quality test and debug patterns for production
Perform Static Timing Analysis (STA) for DFT modes and conduct gate-level simulations to ensure robust performance
Drive test coverage and quality metrics to meet stringent manufacturing requirements
Cross-Functional Collaboration & Methodology Innovation

Act as a multidisciplinary bridge, collaborating closely with Architecture, Verification, and Backend teams to ensure seamless integration and optimal QoR
Participate in developing and maintaining cutting-edge DFT implementation flows
Automate and improve methodologies using advanced scripting and tools
Requirements:
Bachelor's degree in Electrical Engineering or related technical field
3+ years of hands-on experience in DFT roles at semiconductor companies
Deep expertise in DFT flows and architectures including JTAG/iJTAG, MBIST, Scan, and ATPG
Proficiency with industry-standard EDA tools from Synopsys (TestMAX) or Mentor (Tessent)
Strong understanding of logic design, verification, debug, and Static Timing Analysis (STA)
Scripting proficiency in Tcl, Perl, Python, or Shell for automation and innovation
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8652211
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
6 ימים
Location: Haifa
Job Type: Full Time
we're seeking a highly skilled Chip Top Physical Design Engineer focusing on implementation to join our local engineering powerhouse from the ground up.
If you thrive on solving complex, unnamed challenges in deep-submicron processes, your place is with us.

As a Physical Design Engineer, you will be a key hands-on member of our PD Team in the Israel R&D center. You will execute the physical design of the SoC Top level for chips that drive the worlds largest AI clusters. You will be deeply involved in all PD disciplines of the chip, driving the tape-out (T.O.) GDS to meet strict signoff criteria (Timing, LVS, EMIR, DRC, PV, etc.), ensuring our silicon meets the extreme performance, power, and area (PPA) targets required for AI scale.

Key Responsibilities


Execute SoC Top-level physical design and actively drive full-chip convergence
Perform Top-Level physical implementation, including floor-planning, Place & Route (P&R), Clock Tree Synthesis (CTS), Power/Clock distribution, Power Integrity, and Timing/Physical signoff
Work closely with the Architecture, Design, DFT, and Product teams to achieve optimal Power, Performance, and Area (PPA). This involves participating in feasibility studies for new architectures and optimizing runs to ensure the best Quality of Results (QoR)
Resolve complex signal integrity, thermal, and power challenges inherent in high-speed connectivity silicon
Collaborate closely with the Package team on Bump-map-to-Ballout design, taking all signal integrity aspects into consideration
Requirements:
B.Sc. or M.Sc. in Electrical Engineering
5+ years of hands-on experience in Chip Top Physical Design/Backend at leading semiconductor companies, working on advanced process technologies (5nm, 3nm, and below)
Proven experience executing complex block or chip-level projects with a proactive, "can-do" approach and excellent communication skills
Deep hands-on expertise in RTL2GDS flows, including P&R, STA, Physical Verification (DRC/LVS), Formal Verification, low-power implementation (UPF/CPF), and EMIR
Mastery of industry-standard EDA tools (Synopsys Fusion Compiler/ICC2 or Cadence Innovus)
Practical experience handling both complex macro/subsystem-level designs and Full-Chip integration
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8652208
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
6 ימים
Location: Haifa
Job Type: Full Time
we're seeking a highly skilled Front-End CAD Engineer to join our local engineering powerhouse from the ground up.

As a Front-End CAD Engineer, you will be the backbone of our chip design ecosystem. You wont just be using tools; youll be architecting the methodologies, automation scripts, and design flows that enable our hardware teams to push the limits of silicon performance. Your work directly impacts the productivity of the design team and the time-to-market for our next-generation processors.


Key Responsibilities

Develop, maintain, and optimize RTL generation tools, building automated IPs and SoC schemes
Create robust applications using Python and Tcl to automate models build, regression and analysis tools and other assisting tools for all disciplines in front-end flows
Evaluate and integrate Electronic Design Automation (EDA) tools from vendors like Cadence, Synopsys, and Mentor Graphics
Define the methodologies of usage and integrate AI tools in this fast-growing field impacting all VLSI development flows
Requirements:
Bachelors degree in Electrical Engineering or a related technical field
5+ years of hands-on professional experience in relevant industries
Proven experience in Python and Tcl within a Linux/Unix environment
Knowledge and experience in Verilog and/or System Verilog
Very good communication skills
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8652206
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
6 ימים
Location: Haifa
Job Type: Full Time
we're seeking a visionary Package Design Engineer to help build our local engineering powerhouse from the ground up. This is a unique opportunity to take on meaningful product ownership in a new site, Driving the physical implementation strategy for chips that power the world's largest AI clusters.

As a Package Design Engineer, you will be a core technical contributor in the development of advanced IC packaging solutions for high-performance connectivity silicon. You will execute the package flow, design, and qualification from concept through production, working closely with silicon, signal integrity, power integrity, mechanical, manufacturing, and external OSAT partners. You will be responsible for implementing package technologies that meet aggressive electrical, thermal, mechanical, and cost targets, enabling products to operate reliably in the worlds most demanding AI and cloud environments.

Key Responsibilities


Execute end-to-end IC package design, from early feasibility and detailed design through to qualification and high-volume manufacturing
Implement package architecture and utilize advanced technologies (organic substrates, advanced laminate, interposers, multi-die/chiplet packaging, CoWoS - 2.5D/3D integration)
Drive signal integrity (SI), power integrity (PI), and thermal considerations at the package level for high-speed, high-power devices
Perform package layout, substrate routing, bump/ball maps, stack-ups, materials selection, and apply mechanical constraints
Collaborate closely with silicon design, SerDes, system, SI/PI, and reliability teams to optimize overall product performance
Interface directly with OSATs, substrate vendors, and manufacturing partners to ensure design-for-manufacturability (DFM), yield, and cost targets are met
Conduct package-related risk assessments, failure analysis, and corrective actions during bring-up and production ramp
Support NPI, qualification, and product sustainment activities, including vendor technical reviews
Requirements:
5+ years of hands-on IC package design experience for high-performance semiconductor products, with full technical ownership from concept through tape-out
Expert proficiency in IC package design tools (Cadence APD / SiP or equivalent) and hands-on experience designing complex packages (BGA, FCBGA, FCCSP)
Strong package integration expertise, including stack-ups, ball/bump maps, constraints, SMT integration, and package BOM ownership
Deep understanding of signal, power, and thermal integrity at the package level, with the ability to execute design tradeoffs based on analysis
Proven manufacturing and release experience, including running DRC/LVS/DFM, OSAT engagement, and delivering production-ready package designs
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8652014
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
6 ימים
Location: Haifa
Job Type: Full Time
we're seeking a highly skilled Physical Design CAD Engineer specializing in CAD Extraction to join our local engineering powerhouse from the ground up.

This is a unique opportunity to take on meaningful technical ownership in a new site, implementing the parasitic extraction (PEX) methodologies and flows for chips that power the world's largest AI clusters. As a foundational member of the team, you will be responsible for the accuracy and efficiency of our extraction environment, ensuring that our high-speed designs are modeled with the highest precision from RTL to GDSII.

Key Responsibilities

Develop, qualify, and maintain automated RC extraction flows for high-performance AI SoCs
Own the setup and validation of foundry technology files (e.g., StarRC/Quantus techfiles, TLU+, ITF) across various process corners
Perform correlation studies between different extraction tools and 3D field solvers (e.g., Raphael, QuickCap) to ensure modeling accuracy
Collaborate closely with the Signal Integrity (SI) and Power Integrity (PI) teams to provide accurate parasitic data for critical high-speed nets and power grids
Implement automated scripts (Tcl/Python) to streamline extraction regressions, data parsing, and PEX-to-STA (Static Timing Analysis) handoffs
Analyze the impact of layout effects (LDE) and parasitics on timing and power, providing feedback to the implementation team to optimize PPA
Interface with EDA vendors and foundries to resolve extraction tool bugs and methodology gaps related to advanced nodes (5nm/3nm)
Requirements:
Bachelors degree in Electrical Engineering or a related technical field
5+ years of hands-on experience in Physical Design CAD or Physical Verification with a heavy focus on parasitic extraction
Expert proficiency with industry-standard extraction tools such as Synopsys StarRC, Cadence Quantus (QRC), or Siemens Calibre xACT
Strong scripting skills in Tcl and Python for flow automation and database manipulation
Deep understanding of semiconductor physics, interconnect modeling, and the impact of parasitics on timing, EM (Electromigration), and IR drop
Proven experience in validating tech files and running extraction for complex, multi-million gate designs
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8651990
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
6 ימים
Location: Haifa
Job Type: Full Time
we're seeking a highly skilled Static Timing Analysis (STA) Engineer to join our local engineering powerhouse from the ground up.

This is a unique opportunity to take on meaningful technical ownership in a new site, executing the sign-off methodology for chips that power the world's most advanced AI clusters. As an STA Engineer, you will be deeply involved in the STA activities from chip partition and time budgeting through to final sign-off. You will bridge the gap between Architecture, Design, DFT, and Physical Design to ensure our high-performance silicon meets the aggressive timing targets required for next-generation connectivity.

Key Responsibilities


Execute the STA flow and sign-off methodologies, ensuring our products meet rigorous timing criteria for the most demanding data center environments
Collaborate closely with Architecture, Design, DFT, and Backend teams, participating in timing reviews and working with block owners to navigate the path to sign-off convergence
Develop, optimize, and manage complex SDC constraints, ensuring they are accurate and robust across multi-scenario environments
Analyze and resolve challenges related to cross-chip clock distribution networks and apply sophisticated margining techniques to ensure robust silicon across all process corners
Participate in design methodology improvements and tool automation, utilizing both industry-standard EDA tools and custom scripts to make our sign-off process faster and more efficient
Requirements:
B.Sc. in Electrical Engineering or Computer Engineering
5+ years of hands-on experience in Static Timing Analysis (STA) at semiconductor companies, specifically working on advanced process technologies. (Note: Adjust years of experience based on the exact level you are targeting)
Deep expertise in multi-scenario STA, as well as timing and SDC constraint development and verification at the block and subsystem levels
Solid understanding of advanced margining methodologies, including OCV, AOCV, and POCV, from synthesis through to final sign-off
Solid knowledge of physical design flows (Synthesis, P&R, Physical Verification) and how they intersect with timing closure
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8651961
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Haifa
Job Type: Full Time
We are looking for a Senior PCB Design layout Engineer to join our Hardware engineering team at the Autonomous Vehicle Platform department as a key player in the development of next-generation ECU (electrical control unit) for autonomous vehicles.
What will your job look like?
Working closely with hardware and mechanical design engineers, you'll perform PCB layout our ECUs and other products.
Complete development of CAD layout from footprint definition, detailed component placement, constraints management, with a concept of topology and signal and power integrity.
Be responsible for the design releases required generation of artwork files, ODB++, FAB drawings, ICT report, and electronic PCB documentation.
Your designs will need to follow IPC class 3 , signal and power integrity constraints, EMI/RFI control and automotive regulations..
Requirements:
B.Sc in Electronic Engineering or equivalent experience
5+ years experience in high-speed design
Having a detailed knowledge of circuit design and consideration for layout, routing, and timing constraints, DFM, DFA, DFT constraints in volume manufacturing is needed for this role.
Be an authority in using PCB design tools (Mentor - a must , more tools - Advantage)
Have a deep understanding of PCB Signal Integrity and Power integrity.
Knowledge in PCB manufacturing processes for HDI, Standard Thru-Hole, and Back-drilling.
Strong verbal and written communication skills in English
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8638986
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Haifa
Job Type: More than one
Required V&V Intern
Job Description Summary
Responsible for running various verification activities on PET medical products that covers multi-disciplinary aspects from SW/HW, electronics, mechanics, physics, image quality and radiation - which is safety for users and monitored by a tag all the time.
Job Description
Responsible for planning and implementing verification methodologies and ensuring proper fulfillment of system and sub-system requirements.
Responsible for reviewing various product designs, verifying its functionality in agile testing methods.
Responsible to determine the testing environments and tools.
Analyze and debug system failures and issue found during testing, while delivering detailed reports identifying these issues for further investigation.
Work closely with development teams
Non-hybrid, full-time position on site
Flexible on working hour, including 2-3 evening shifts (14:00-23:00) per week as needed
Working on global programs that required tight collaboration with global and Israel teams.
Requirements:
B.Sc. in Mechanical / Bio-Medical / Electronic Engineering
+3 years of experience in multi-disciplinary medical products manual/automation testing, with strong knowledge of software QA processes
Good documentation skills of test design and scripts for complete coverage of detailed system requirements
Quality focus, willingness to learn, versatility and adaptability.
Good organizational skills and strong written and verbal communication.
Excellent English skills (read and write).
Advantages:
Experience >5 years as verification engineer in medical device (PET/SPECT) companies
Experience with Agile methodology
Experience with Linux and MATLAB
Experience with Python & automation development
Experience with test tools and frameworks (such as: ALM, Rally, Doors & Compass).
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8629878
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Haifa
Job Type: Full Time
Required V&V Engineer
Job Description Summary
Responsible for running various verification activities on PET medical products that covers multi-disciplinary aspects from SW/HW, electronics, mechanics, physics, image quality and radiation - which is safety for users and monitored by a tag all the time.
Job Description:
Responsible for planning and implementing verification methodologies and ensuring proper fulfillment of system and sub-system requirements.
Responsible for reviewing various product designs, verifying its functionality in agile testing methods.
Responsible to determine the testing environments and tools.
Analyze and debug system failures and issue found during testing, while delivering detailed reports identifying these issues for further investigation.
Work closely with development teams
Non-hybrid, full-time position on site
Flexible on working hour, including 2-3 evening shifts (14:00-23:00) per week as needed
Working on global programs that required tight collaboration with global and Israel teams.
Requirements:
B.Sc. in Mechanical / Bio-Medical / Electronic Engineering
+3 years of experience in multi-disciplinary medical products manual/automation testing, with strong knowledge of software QA processes
Good documentation skills of test design and scripts for complete coverage of detailed system requirements
Quality focus, willingness to learn, versatility and adaptability.
Good organizational skills and strong written and verbal communication.
Excellent English skills (read and write).
Advantages:
Experience >5 years as verification engineer in medical device (PET/SPECT) companies
Experience with Agile methodology
Experience with Linux and MATLAB
Experience with Python & automation development
Experience with test tools and frameworks (such as: ALM, Rally, Doors & Compass).
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8629704
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
19/04/2026
Location: More than one
Job Type: Full Time
We are looking for highly motivated engineers who love the challenges and the opportunity of a small company.
Join us and be a part of a small and dynamic team, which revolutionizes the parallel processor architecture.
Requirements:
BSc in Electronics Engineering or Computer Science
10+ Years of industry experience in verification, full chip dev. cycle.
2+ years of experience in leading a team of engineers (including technical and personal mentoring, etc.)
Experience with System Verilog and UVM methodology - MUST
Advantages:
M.Sc. in Electronics Engineering or Computer Science
Working experience with Formal verification
Scripting skills in Python/Perl/shell
Hands-on experience with two or more of the following :
PCIE (Gen5 and above).
DDR (v4 and above).
AMBA protocol family, (inc. AXI4+, ACE/CHI)
ARM core architecture.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8616469
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
19/04/2026
Location: More than one
Job Type: Full Time
we are looking for a VLSI Design Engineer.
Requirements:
BSc in Electronics Engineering.
7+ Years of industry experience in VLSI Design.
Acquaintance with all aspects of chip development.
Familiar with Design/Verification tools and methodologies.
Experience with Verilog RTL coding and Verification support.
Experience with Synthesis flows - an advantge.
Highly Motivated, Independent and responsible.
Team Player and with excellent interpersonal skills.
Experience with DDR IPs - An Advantage
Experience with DDR 5 and up IPs - A Huge Advantage
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8616375
סגור
שירות זה פתוח ללקוחות VIP בלבד
סגור
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
סגור
v נשלח
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
Location: Tel Aviv-Yafo and Haifa
Job Type: Full Time
we are looking for forward-thinking, self-motivated engineers who thrive in fast-paced environments and "crisis times." Beyond technical excellence, successful candidates are:
Intrinsically, see the importance of every detail in "elegant solutions."
Excellent interpersonal and communication skills to work across diverse functional areas.
Schedule-driven with a desire to solve challenges that have never been solved before.
Responsibilities
Micro-Architecture & RTL: Design and implement high-quality, power-efficient RTL (Verilog/SystemVerilog) from block-level to sub-system levels.
Cross-Functional Collaboration: Partner with Architecture, Algorithm, Software, and Physical Design (PD) teams to translate product requirements into GDS-ready silicon.
Front-End Flow Management: Take ownership of "correct-by-construction" design tasks, including Synthesis, Lint, CDC/RDC (Clock/Reset Domain Crossing), and STA (Static Timing Analysis).
Verification Support: Work closely with Design Verification (DV) and Formal Verification teams to define coverage requirements, develop testbenches, and debug functional/performance issues.
Post-Silicon & Validation: Support pre-silicon emulation (FPGA, Palladium) and post-silicon validation in lab environments to ensure spec compliance.
Requirements:
B.Sc. or M.Sc. in Electrical Engineering (EE) or Computer Engineering (CE).
3-6+ years of hands-on experience in ASIC/Digital Logic design.
Expert-level SystemVerilog/Verilog; Proficiency in C/C++ and MATLAB.
Strong ability in Python, Perl, or Tcl for design automation and flow management.
Low-power design (UPF, clock/power gating), High-bandwidth pipelines, and DFT.
This position is open to all candidates.
 
Show more...
הגשת מועמדותהגש מועמדות
עדכון קורות החיים לפני שליחה
עדכון קורות החיים לפני שליחה
8607814
סגור
שירות זה פתוח ללקוחות VIP בלבד
משרות שנמחקו
ישנן -45 משרות בחיפה וסביבתה אשר לא צויינה בעבורן עיר הצג אותן >