הייטק / חומרה / תוכנה / סייבר
1-10
דרושים ב- סנסיטיב טכנולוגיות בע'מ
לא נמצאו משרות
אמנם ל- סנסיטיב טכנולוגיות בע'מ אין משרות אקטואליות כרגע,
אבל הנה משרות דומות שיכולות לעניין אותך:
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
המשרה נמחקה
תוכל לצפות בה בדף המשרות שלי
המשרה הוחזרה לרשימת תוצאות החיפוש
האם תרצה להסיר את המשרה מרשימת
המשרות השמורות שלך?
כן
לא
אירעה שגיאה בשליחת פרטיך למשרה
משרה בלעדית
Location: More than one
Job Type: Full Time
Creating detailed designs of multidisciplinary projects while working on multiple tasks simultaneously
Closely working with other teams within the R D department (software, electronics, physics, NPI) and the engineering team
Working with subcontractors in Israel and abroad and validate the supplied parts/assemblies.
Closely working with other teams within the R D department (software, electronics, physics, NPI) and the engineering team
Working with subcontractors in Israel and abroad and validate the supplied parts/assemblies.
Requirements:
Sc. in Mechanical Engineering
At least two years of experience in multidisciplinary design - must
Experience in a medical device company - an advantage
Experience in the following manufacturing methods as well as working with subcontractors: Machining (turning/milling etc.), and sheet metal (bending/laser cutting) - must
Experience in design for mass production must
Experience designing moving mechanisms, optomechanical assemblies, plastic injection molded parts, and heat exchange systems an advantage
Ability to produce detailed drawings of parts and assemblies, as well as transferring product portfolios to the production line
SolidWorks experience - must
EPDM experience - an advantage
3D printing experience - an advantageous
high responsibility, personal initiative and be proactive
Sc. in Mechanical Engineering
At least two years of experience in multidisciplinary design - must
Experience in a medical device company - an advantage
Experience in the following manufacturing methods as well as working with subcontractors: Machining (turning/milling etc.), and sheet metal (bending/laser cutting) - must
Experience in design for mass production must
Experience designing moving mechanisms, optomechanical assemblies, plastic injection molded parts, and heat exchange systems an advantage
Ability to produce detailed drawings of parts and assemblies, as well as transferring product portfolios to the production line
SolidWorks experience - must
EPDM experience - an advantage
3D printing experience - an advantageous
high responsibility, personal initiative and be proactive
This position is open to all candidates.
Show more...
7699074
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
המשרה נמחקה
תוכל לצפות בה בדף המשרות שלי
המשרה הוחזרה לרשימת תוצאות החיפוש
האם תרצה להסיר את המשרה מרשימת
המשרות השמורות שלך?
כן
לא
אירעה שגיאה בשליחת פרטיך למשרה
משרה בלעדית
אמרל בע"מ
Location: More than one
Job Type: Full Time
Design Mechanical Multidisciplinary products from the initial concept to release as a part of the R D team
Independently lead product design from concept, through detailed design, and support it during Qualification, NPI and production stage
Management of sub-contractors
Design and production of molded plastics parts Sheet metal
Preparing mechanical drawings, production support of prototypes and products
Hands on activities such as: Assembly, testing.
Ensure project timeline is met and project stays within budget
Independently lead product design from concept, through detailed design, and support it during Qualification, NPI and production stage
Management of sub-contractors
Design and production of molded plastics parts Sheet metal
Preparing mechanical drawings, production support of prototypes and products
Hands on activities such as: Assembly, testing.
Ensure project timeline is met and project stays within budget
Requirements:
Bachelor's degree in mechanical engineering - Must
At least 5 years of experience working in engineering Must
Experience in development of military products - Advance
Experience using CAD software such as SolidWorks/Inventor - Must
Experience designing mechanical systems and products (Plastics, Sheetmetal and molding)
Bachelor's degree in mechanical engineering - Must
At least 5 years of experience working in engineering Must
Experience in development of military products - Advance
Experience using CAD software such as SolidWorks/Inventor - Must
Experience designing mechanical systems and products (Plastics, Sheetmetal and molding)
This position is open to all candidates.
Show more...
7566701
דיווח על תוכן לא הולם או מפלה
מה השם שלך?
תיאור
שליחה
תודה על שיתוף הפעולה
מודים לך שלקחת חלק בשיפור התוכן שלנו :)
המשרה נמחקה
תוכל לצפות בה בדף המשרות שלי
המשרה הוחזרה לרשימת תוצאות החיפוש
האם תרצה להסיר את המשרה מרשימת
המשרות השמורות שלך?
כן
לא
אירעה שגיאה בשליחת פרטיך למשרה
Location: More than one
Job Type: Full Time
An amazing start up is looking For the operational FAB a clean room equipment maintenance Engineer who will be responsible for the maintenance, qualification of our cleanroom facilities, testing equipment and processing.
Responsibilities:
Responsible for the cleanroom (class 1000 10,000) facility management (qualification/maintenance/
extensions) including peripheral utilities (ventilated AC/humidity, DI water, gas pressure board/pipelines control, MFCs, Gases supply etc), and Quality Management system.
Responsible for the qualification, calibration and maintenance (preventive and corrective) of production and testing equipment according to established procedures, applicable guidelines and regulations, including the supportive documentation.
Primary contact within the company for external suppliers and you are supervising the outsourced engineering, maintenance and quali
Responsibilities:
Responsible for the cleanroom (class 1000 10,000) facility management (qualification/maintenance/
extensions) including peripheral utilities (ventilated AC/humidity, DI water, gas pressure board/pipelines control, MFCs, Gases supply etc), and Quality Management system.
Responsible for the qualification, calibration and maintenance (preventive and corrective) of production and testing equipment according to established procedures, applicable guidelines and regulations, including the supportive documentation.
Primary contact within the company for external suppliers and you are supervising the outsourced engineering, maintenance and quali
Requirements:
Personal Skills:
A professional degree in Engineering or equivalent technical degree (electrical,
mechanical or related engineering) with a minimum of two (2) years of experience in
high vacuum systems/facility and/or equipment maintenance/qualification.
Technically skilled, hands-on, problem solver and quality minded.
Used to work according to established procedures.
Background in control systems an advantage
Ability to work independently and in a team.
Ambitious, self-responsible, goal-oriented team player that is open for new challenges.
Excellent interpersonal skills.
Personal Skills:
A professional degree in Engineering or equivalent technical degree (electrical,
mechanical or related engineering) with a minimum of two (2) years of experience in
high vacuum systems/facility and/or equipment maintenance/qualification.
Technically skilled, hands-on, problem solver and quality minded.
Used to work according to established procedures.
Background in control systems an advantage
Ability to work independently and in a team.
Ambitious, self-responsible, goal-oriented team player that is open for new challenges.
Excellent interpersonal skills.
This position is open to all candidates.
Show more...
7654476
